Manual

Appendix
Problem
o No picture
o Picture quality of HD programs is
poor.
o The TV sometimes makes a
cracking sound.
Possible Solution
o
o
o
o
o
Is connection to other components correct? _ Page 11
Is correct input signal source sebcted after connection? _ Page 24
Is the correct input sebcted? ,_ Page 15
Is "On" sebcted in "Audio Only"? _ Page 24
If the PC image is not displayed, check the fobwing:
When connecting a hptop PC to the TV, check that disphy output mode ot the
PC is set to external monitor.
Check the resolution setting on the PC. is a non-compatibb signal being input?
=_Page 80
o To eqoy HD images trom external equipment, you are required to set up HDMI
connection or component connection.
o If the program content is not ot HD quality, HD images cannot be displayed. Check
that the program you are viewing provides HD images.
o The HD cabb/satellite set top box may need to be configured to output HD images
via cabb/satellite.
o The cabb/satellJte broadcast may not support a signal resolution ot 1080p.
o This is not a malflJnction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
pertormance.
The example of an error message Possible Solution
displayed on a screen
o Failed to receive broadcast, o Check the antenna cable. Check that the antenna is correctly setup.
o No broadcast now. o Check the broadcast time in the program guide.
Cautions regarding use in high and low temperature environments
o When the unit is used in a low temperature space (e.g. room, of/be), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
o Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
h Storage temperature: - 4°F to I 140°F - 20°C to I 60°C
28