Manual

Basic adjustment settings
You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Press MENU and the MENU screen displays.
Press _1/1_ to select "Setup".
Press A/5' to select "EZ Setup", and then
press ENTER.
• It,you already set the Secret No,, go to step 4, Ir
not, skip to step 5,
Input the 4-digit secret number by using 0 - 9.
Press A/5' to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable" for ANALOG and
DIGITAL (Cable),
Press _1/1_ to select "Air", "Cable", for
ANALOG, then press • to move down,
Press _1/1_ to select "Standard", "HRC",
"IRC" for DIGITAL (Cable),
Press ENTER to enter the setting,
• There are 3 kinds or CATV system, including
Standard, HRC and IRC. Select the one matches
to your TV.
• It cable or antenna connection was selected for
the ANALOG IN terminal at the time when you
set up TV Guide On Screen, the analog settings
cannot be changed afterward. It you need to
change the analog settings, you will have to
change the TV Guide On Screen settings first.
Channel search
Channel auto search rnakes the TV look for #111channels
viewable in the set area.
Press _1/1_ to select "Yes" for ANALOG, then
press • to move down,
Press _1/1_ to select "Yes" for DIGITAL (Air),
then press • to move down,
Press _1/1_ to select "Yes" for DIGITAL
(Cable), and press • to move down,
Select "Search Start", and then press
ENTER,
• This operation makes the TV search [or both
ANALOG, DIGITAL (Air) and DIGITAL (Cable)
channels,
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels,
Antenna setting
Press MENU and the MENU screen displays,
Press _1/1_ to select "Setup",
Press A/• to select "CH Setup", and then
press ENTER,
• It you already set the Secret No., input the 4-
digit secret number here, See page 69 t,or
setting a secret number,
Press A/• to select "Air/Cable", and then
press ENTER,
Press _1/1_ to select "Air", "Cable", for
ANALOG, then press • to move down,
Press _1/1_ to select, "Standard", "HRC",
"IRC" for DIGITAL (Cable),
Press ENTER to enter the setting,
• Make sure what kind or connection is made with your TV,
• There are 3 kinds or CATV system, including Standard,
HRC and IRC. Select the one matches to your TV,
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area,
Repeat steps 1 to 3 in Antenna setting in
Channel Setup,
Press A/• to select "CH Search", and then
press ENTER,
Press _1/1_ to select "Yes" for ANALOG, then
press • to move down,
Press _1/1_ to select "Yes" for DIGITAL (Air),
then press • to move down,
Press _1/1_ to select "Yes" for DIGITAL
(Cable), and press • to move down,
Select "Search Start", and then press
ENTER,
• Make sure what kind or connection is made with your TV.
Q -38
• ir no channel is round, make sure what kind or connection is
made with your TV and try EZ Setup again.
• Make sure what kind o[ connection is made with your TV,