Manual

Basic adjustment settings
Automatically adjusts the brightness of the screen,
Press MENU and the MENU screen displays,
Press _1/1_ to select "Picture",
Press A/V to select "OPC",
Press _1/1_ to select "On" or "On: Display",
This TV provides various advanced functions for
optimizing the picture quality,
Press MENU and the MENU screen displays,
Press _1/1_ to select "Picture",
Press A/V to select "Advanced", and then
press ENTER,
Press A/V to select a specific adjustment
item,
• You can select "C,M,S-Hue", "C,M,S-
Saturation", "C,M ,S-Value", "Color Temp,",
"Sharpness Enhancement", "Automatic
Contrast", "3D-Y/C", "Monochrome", "Film
Mode" or "I/P Setting",
Press A/V (or _1/1_) to select the desired
parameter,
• See the table for the selectable
parameters,
Off The brightness is fixed at the value set in
"Backlight'r (see page 41).
On Automatically adjusts
On: Display Displays the OPC effect on the screen while
adjusting the brightness of the screen.
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the ()PC sensor, which could
affect its ability to sense surrounding light.
• When set to "On: Display", ()PC effect displays on the
screen while ()PC is adjusting the screen brightness,
Color tone is managed using the six-color adjustment
setting,
C.M.S-Hue This is a standard to adjust the color either
C.M.S-
Saturation
C.M.S-
Value
more reddish or more bluish in tone.
Increasesor decreases the saturationofa
selected color.
A higher value makes the image brighter.
A lower value makes the image darker.
• For resetting all adjustment items to the factory preset
values, press A/T to select "Reset", and then press
ENTER.
For a better white balance, use color temperature
correction,
High White with Bluish tone
Mid-High
Middle I
Mid-Low
Low WhitewithReddishtone
Q -42