Manual

Using external equipment
Please use the INPUT 4 terminal when connecting HDMI equipment,
I H_I Dll_ll[llll[llll
IllIMll
C ii
HDMIcable
(commercially available)
HDMI equipment
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV, (See page 61 ,)
Press MENU and the MENU screen displays,
Press _1/1_ to select "Option",
Press A/V to select the desired item and
press ENTER,
Press A/V/_I/I_ to select the desired setting
and press ENTER,
Signal Auto/RGB/YCbCr Select the signal type [rom
Type 4:4:4/YCbCr 4:2:2 an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Color Auto/ITU601/ Select the internal color
Matrix ITU709 space conversion method
when an RGB signal is
input. Normally, select
Auto,
Dynamic Standard/ Select the signal amplitude
Range Out or Standard range. Normally, select
Standard.
Auto View Enable/Disable Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
Press A/V to select"HDMI Setup", and then • Refer to your external equipment operation manual for
press ENTER, the signal type,
Option
Q "51