Manual

Useful adjustment settings
c---n r----? @
Selecting input source
Use this menu to select the input source,
Press INPUT,
• A list or selectable sources appears,
Press INPUT again to select the input source,
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing A/T.
• Ir the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
• When the CableBox is selected in TV Guide
On Screen setting, CableBox will be displayed
in the INPUT SOURCE screen. Ir you select
CableBox in the INPUT SOURCE screen you
(:an change the channels o[ the CableBox.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 and INPUT 2 terminals,
Press MENU and the MENU screen displays,
DVI input signal setting
Press INPUT to select INPUT5,
._ INPUT5
Press MENU and the MENU screen displays,
Press _1/1_ to select "Option",
Press A/V to select "Input Select", and then
press ENTER,
Option
Press _1/1_ to select "Option",
Press A/V to select "Input Select", and then
press ENTER,
Press A/T to select a signal type you want
to set, and then press ENTER,
• Irthe selected signal type is incorrect, images
are not displayed or displayed without any
color,
Press A/V to select the equipment
connected to INPUT 5 terminal, and then
press ENTER,
• Iryou set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual or the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority,
J l. COMPONENT VIDEO
2.VIDEO J
(_) -61