Manual
Appendix
Problem
• LISTINGS disappeared after a
power failure,
• Some channel numbers in the TV
Guide On Screen are incorrect.
• You have not received any local
program listings,
• A program you set to record did
not record,
Possible Solution
• You should begin to receive listings again within 24 hours,
• You can correct them using "Changing channel display" under SETUP,
Listings usually appear within 24 hours after a success[ul Setup.
• Check the connections between the TV, cable, antenna, and the G-LINK cable i[
using a cable box.
• Verity Setup information under "Changing system settings".
• Make sure the cable box is on, ir applicable.
• Review step 3 and step 4 or "Basic Initial Setup" on page 22,
• Make sure your recorder is turned off before the recording begins.
• Make sure there is tree space available for recording on the tape or recording
device.
• Check the SCHEDULE menu and verily that the program is listed, be[ore
recording begins.
• Check the placement or the G-LIN K cable in [ront or your recorder,
• The TV did not tune to a program , Check the SCHEDULE menu and verily that the program is listed,
you scheduled with the reminder , I[ you have a cable box, check the G-LINK cable,
feature,
• You set a program to "auto tune ,
TV" and it did not.
• You set a program with the "power
on TV" option and it did not.
Check the SCH EDU LE menu and verity that the program is listed as a Reminder,
Highlight the program under LISTINGS and do the following:
Press MENU on the remote control.
Use • to highlight "edit reminder", and press ENTER.
Verity that the "auto tune TV" option reads "yes",
The TV must be on at the scheduled time for "auto tune TV",
• Check the SCH EDU LE menu and verity that the program is listed as a Reminder,
• Highlight the program under LISTINGS and do the following:
Press MENU on the remote control.
Use • to highlight "edit reminder", and press ENTER,
- Verity that the "power on TV" option reads "yes".
• The TV must be off at the scheduled time for "power on TV".
Q -82