http://www.sharp-eu.
The details on this page are only for Russian models Информация на этой странице относится только к моделям, изготовленным для России ИНФОРМАЦИЯ О СЕРТИФИКАЦИИ ПРОДУКЦИИ Жидкокристаллические телевизоры марки «SHARP» Модели: LC-40LE820E/LC-46LE820E/LC-52LE820E/LC40LE810E/LC-46LE810E ME10 Модели: SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse.
• The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations. • The examples used throughout this manual are based on the LC-46LE820E model. Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read Important safety precautions carefully before using this product.
Introduction Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV.
Introduction Part name Remote control unit 1 >a (Standby/On) (Page 14) 2 ATV Press to access conventional analogue TV mode. 1 2 DTV Press to access digital TV mode. 3 SAT This function is not available for the 820 and 810 model series. 4 LE820E 4 5 6 7 AQUOS LINK buttons If external equipment such as a AQUOS BD player is connected via HDMI cables and is AQUOS LINK compatible, you can use these AQUOS LINK buttons. See pages 23 and 25 for details.
Introduction TV (front view) 1� 2� 1 2 3 4 5 6 3� 4� 5� 6� 7� 8� 7 Yl/k (Volume buttons) !s/r (Programme [channel] buttons) #b (Input source button) @- (Menu button)
Introduction What is the Menu? You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. Basic operation Display the Menu screen Exit the Menu screen The operation will exit the “Menu” screen if you press > before it is completed. Press @ and the “Menu” screen displays. Select an item The “Menu” is classified by setting categories for improving TV viewing.
Introduction Operation without a remote control unit This function is useful when there is no remote control unit within your reach. 1 2 Press @- and the “Menu” screen displays. 3 Press #b to complete the setting. Press !s/r instead of a/b or Yl/k instead of c/d to select the item. About the guide display The guide display below the menu bar shows operations for the OSD. • The bar above is an operational guide for the remote control unit.
Preparation Attaching the stand unit • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm that there are nine screws (four long screws and five short screws) with the stand unit.
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size alkaline batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 2 Open the battery cover. 3 Close the battery cover. Insert two supplied “AAA” size alkaline batteries.
Quick guide Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Run the initial settings Preparation Connect an antenna cable to the antenna terminal (Page 10). Check that the MAIN POWER switch on the rear of the TV is turned on (;). Watch TV Congratulations! Now you can watch TV. If necessary, adjust the antenna to attain maximum signal reception (Page 13).
Quick guide Before turning on the power 1 2 Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable AC cord (product shape varies in some countries) Check that the MAIN POWER switch on the rear of the TV is turned on Place the TV close to the AC outlet, and keep the power plug within reach. (;).
Quick guide 5 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? E Is the MAIN POWER switch turned on (;)? Press
Quick guide E Searching for cable broadcasts To change each item to the appropriate settings: 1 Press a/b to select the menu, and then press ;. Scrambled stations Search method Menu Scrambled stations Description Yes, No Specifies how you search channels. Channel: Extracts all of information from a channel (quick, but needs corresponding TV stations). Frequency: Checks every frequency in range (slow). Quick*2: All services are searched by one frequency.
Quick guide Checking signal strength and channel strength (DVB-T/C) Channel strength of DVB-T Supply voltage Signal strength If you install a DVB-T/C antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. 1 Channel strength 2 Press a/b to select “Signal strength”, and then press ;.
Watching TV Daily operation Switching on/off Turning on/off the power 1 Turn on (;) the MAIN POWER switch on the rear of the TV (Page 4). 2 To turn on the TV, press a on the remote control unit. 3 To turn off the TV, press a on the remote control unit. 4 Turn off (a) the MAIN POWER switch on the rear of the TV (Page 4). • When turning off the power using the MAIN POWER switch on the rear of the TV, EPG data will be lost.
Watching TV Selecting an external video source Once the connection is made, press b to display the “INPUT” screen, and then press b or a/b to switch over to the appropriate external source with ;. NOTE • You can also select an external video source from “CH list” > “INPUT”. Selecting a sound mode E DTV mode If multi sound modes are received, each time you press 7 the mode switches as follows.
Watching TV EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO/ DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic setting EPG display settings View setting Option EPG Display range setup If you want to use the EPG for digital stations, select “Yes”. The EPG data must be automatically captured while the TV is in standby mode.
Watching TV Selecting a programme using EPG Basic operation The illustrations on this page are explained using three digit services. AM PM E Display/Close the EPG screen Press EPG. Programme info. Select Enter Search by genre Back Search by date Timer list Exit NOTE • You can also display the EPG screen from “Menu” > “EPG” > “EPG”. E Select a programme 2 Select the desired programme 1 Select the time span Press a/b to select the desired programme.
Watching TV 6 Display the timer list for TV programmes Cancelling the timer setup 1 2 Press EPG. 3 Press c/d to select “Cancel”, and then press ;. Press EPG. 4 Press a/b/c/d to select the programme you want to set, and then press ;. Press c/d to select “Yes”, and then press ;. E Cancelling using B button on the Press B. • Refer to page 18 for the timer setup. Timer setup using EPG You can switch to a programme at a set time. 1 2 Programme info.
Watching TV Buttons for teletext operations Teletext Buttons What is teletext? Description :r/s Increase or decrease the page number. Colour (R/G/Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding colour (R/G/Y/B) on the remote control unit. Numeric buttons 0_9 Directly select any page from 100 to 899 by using the 0_9 numeric buttons.
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. • Refer to page 46 for connecting a PC to the TV.
Connecting external devices SCART connection Example of connectable devices E VCR E DVD player/recorder Y PB (CB) PR (CR) Component connection Example of connectable devices E VCR E DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device.
Connecting external devices Audio connections VIDEO connection Speaker/amplifier connection Example of connectable devices E E E E VCR DVD player/recorder Game console Camcorder Connect an amplifier with external speakers as shown below. E Connecting an amplifier with digital/ analogue audio inputs You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device.
AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/ recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled to be on sale after the release of this TV. • AQUOS LINK does not work while using time shift functions.
AQUOS LINK Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS recorder HDMI-certified cable AQUOS AUDIO speaker system AQUOS BD player/AQUOS recorder * Optical audio cable The ARC (Audio Return Channel) function works only when using the HDMI 1 terminal. AQUOS LINK setup Basic operation Go to “Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set.
AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. Setup menu You can call up the menu of an HDMI CEC-compatible external device (player, recorder, decoder, etc.) using the “Setup menu” function. Press a/b to select “Setup menu”, and then press ;. NOTE 1 Press I to start playback of a title. 2 Press J to fast forward.
Basic adjustment NOTE Picture settings Go to “Menu” > “Setup” > “Picture”. Menu CH list :Enter Setup • You can also select “AV mode” by pressing #. • The item marked with * is available only when selecting “HDMI 1”, “HDMI 2”, “HDMI 3”, “HDMI 4” or “EXT 3” from the “INPUT” menu. • The item marked with ** is available only when accepting an “x.v.Colour” signal through an HDMI terminal. • If you select “AUTO”, some selections in the “AV mode” menu may not be automatically set.
Basic adjustment Picture Film mode Advanced This TV provides various advanced functions for optimising the picture quality. Go to “Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system. C.M.S.-saturation This function increases or decreases the saturation of a selected colour using a six-colour adjustment system.
Basic adjustment Audio settings Audio Bass enhancer Go to “Menu” > “Setup” > “Audio”. Menu Audio Setup CH list :Enter This function allows you to enjoy bass-enhanced sound. Clear voice :Back Audio STANDARD Auto volume [Off] Treble This function emphasises speech against background noise for greater clarity.
Basic adjustment E “Energy save” status icons Power save settings Icon Go to “Menu” > “Setup” > “ECO”. Menu CH list :Enter “Energy save” is set to “Advanced”. Setup When “Energy save” is set to “Standard” or “Advanced”, “Energy save” status icons appear in the “Picture” menu and channel information windows.
Basic adjustment E Digital search Channel settings After selecting the service you want to search, either “Terrestrial” or “Cable”, refer to Digital broadcast setting on pages 11_12. Menu Setup CH list :Enter E Analogue search :Back The TV searches for, sorts and stores all the receivable TV stations. Refer to Analogue broadcast setting on page 12.
Basic adjustment E Manual adjust Configure various settings for each service using the colour (R/G/B) buttons. Service no. Service name Lock CH skip Old LCN Cable You can reconfigure the following settings when you select “Cable” in the initial auto installation or the “Auto installation” menu. E Additional search Use this menu to add new services automatically after “Digital search” in the “Auto installation” menu has been completed. Follow steps 1 to 5 in Searching for cable broadcasts on page 12.
Basic adjustment Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. Skip Channels with “Skip” set to “On” are passed over when using :r/s even if selected while watching the image from the TV. Decoder • Start searching channels after selecting the colour system and sound system.
Basic adjustment View setting Password/Lock settings Parental rating View setting PIN Allows you to use a PIN to protect certain settings from being accidentally changed. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”. NOTE • PIN input is required when executing “PIN”. The default PIN is “1234”. To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 50). E When selecting “Yes” This function allows DTV services to be restricted.
Basic adjustment View setting Language settings Language View setting Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the multi audio languages You can select an OSD language from among 23 languages. Refer to the OSD language column in the specification table for the selectable languages (Page 53).
Useful viewing functions Time shift This function enables you to pause the digital TV programme you are watching and start watching it again from the paused scene. This function is available only for the 820 model series. 1 2 Press READY. • The TV starts temporary recording of the real time broadcast in the background. • Time shift recordable time is approximately 150 minutes for SD or 60 minutes for HD (depending on the programmes). Press I.
Useful viewing functions Option Display information regarding time shift Auto input selection Channel display Channel information displays by pressing p on the remote control unit. You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK or an Euro SCART compatible signal on the TV during time shift operations. Go to “Menu” > “Setup” > “Option” > “Time shift setting” > “Auto input selection”.
Useful viewing functions Item (for SD [Standard-Definition] signals) Selecting the picture size Selecting the WSS picture size automatically Normal Keeps the original aspect ratio in a full screen display. Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. Panorama In this mode, the picture is stretched toward each side of the screen. The picture may appear similar to “Full” depending on broadcast signals.
Useful viewing functions Selecting the recording picture size manually Adjusting image position Option Option REC picture size You can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV. Position For adjusting a picture’s horizontal and vertical position. Go to “Menu” > “Setup” > “Option” > “Screen effect” > “Position”. Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “REC picture size”. Item H-Pos.
Useful viewing functions Display settings Time and title display Channel display View setting Time display You can display the channel information by pressing p on the remote control unit. DTV mode Audio (ENG) STEREO Video Subtitle Off >> New information * Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Time display”. ATV mode Time display Auto Subtitle MONO Four digit numbers (e.g., 0001) are displayed after selecting the five Nordic countries in the country setting.
Other useful features Setting when using external devices Input source settings 4 Repeat until the label is fully spelt out. NOTE • The label can be six characters or less. • When you want to set an input source label of less than six characters, select “END” to set the name. CH list Option Input select INPUT For setting the signal type of external equipment. 1 2 TV Press b to select the input source for setting the input signal (“EXT 1” or “EXT 3”) from the “INPUT” menu, and then press ;.
Other useful features Additional features Option Channel selecting effect Option Colour system This function shows a screen effect when choosing or changing channels. Go to “Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”. You can change the colour system to one that is compatible with the image on the screen. Go to “Menu” > “Setup” > “Option” > “Colour system”. Option Illumination NOTE • The factory preset value is “Auto”.
Other useful features Connecting a USB device Connect an USB device to the TV as shown below. • The TV automatically switches to the USB mode when a USB device is inserted in the USB terminal (this does not work when using the time shift function). • Depending on the USB device, the TV may not be able to recognise the contained data. • Use only alphanumeric characters for naming files. • File names over 80 characters (may vary depending on the character set) may not be displayed.
Other useful features Photo mode Slide show E Selecting the BGM Viewing thumbnails Setup the slide show BGM from “Select slide show BGM” by pressing B when selecting photo thumbnails. * This bar is not shown in the “Home network” screen. Buttons for thumbnail operations Buttons Description When selecting a folder icon: Enter this directory. When selecting a photo thumbnail: Enlarge the photo. ; a/b/c/d (Cursor) Select a desired item. 6 Return to the previous operation.
Other useful features NOTE Music mode • “Video mode” is only available for USB mode. • Instead of pressing buttons on the remote control unit, the operations above are also available on the screen with the operation panel. You can call up this operation panel by pressing CONTROL on the remote control unit or select “Control (USB)” from “Option” > “Option for view”. • When there are invalid video files, the g mark will be displayed for the file.
Other useful features NOTE View setting Progressive format jpeg files are not supported. Music files in USB 1.1 devices may not be played properly. Operation using USB hubs is not guaranteed. Some video file formats may not be played depending on the file. • • • • DivX® setup This is the function to confirm your registration code. You need to register the code at www.divx.com. Selecting the picture size for video mode Go to “Menu” > “Setup” > “View setting” > “DivX® setup”.
Connecting a PC E After connecting Connecting a PC You must also set “RGB” from the “Input select” menu when selecting “EXT 3” from the “INPUT” menu (Pages 15 and 40). HDMI connection NOTE PC HDMI 1, 2, 3 or 4 • The PC input terminals are DDC1/2B-compatible. • Refer to page 47 for a list of PC signals compatible with the TV. Displaying a PC image on the screen HDMI-certified cable PC You can select the picture size. ø 3.5 mm stereo 1 Press f.
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually Option Option Fine sync. Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. Ordinarily you can easily adjust the picture as necessary to change image position using “Auto sync.”.
Connecting a PC RS-232C port specifications PC control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type) (commercially available) for the connections. NOTE • This operation system should be used by a person who is accustomed to using PCs.
Connecting a PC RS-232C command list CONTROL ITEM COMMAND PARAMETER * _ H-POSITION (AV/PC) O S * * * _ V-POSITION (AV/PC) C K * * * _ CLOCK (0_180) H S E * * _ _ PHASE (0_40) W I D E 0 _ _ _ TOGGLE (AV) EXT 1_3 (1_3), HDMI 1_4 (4_7) W I D E 1 _ _ _ NORMAL (AV) W I D E 2 _ _ _ ZOOM 14:9 (AV) TV DIRECT CHANNEL (1_99) W I D E 3 _ _ _ PANORAMA (AV) W I D E 4 _ _ _ FULL (AV) W I D E 5 _ _ _ CINEMA 16:9 (AV) W I D E 6 _ _ _
Appendix Troubleshooting Problem Possible solution • No power. • • • Turn on (;) the MAIN POWER switch on the rear of the TV (Page 4). Is the AC cord disconnected? Check if you pressed
Appendix Updating your TV via DVB-T Getting update information Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. View setting Download setup Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search” > “Download setup”. Searching for updates* All countries except UK, Sweden and Italy are set to “No” for this function.
Appendix Updating your TV via USB Information Software update This function allows you to update to the latest software using a USB device. You must update the software through the USB terminal. • To check the software version for the TV, use the URL shown on the back cover. 1 Go to “Menu” > “Setup” > “Information” > “Software update”. 2 Press ; and then insert the USB device containing the software update file.
Appendix Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Specifications Item LCD COLOUR TV (40 o/81.28 cm), LC-40LE820E, LC40LE810E LCD COLOUR TV (46 o/116.84 cm), LC-46LE820E, LC46LE810E LCD COLOUR TV (52 o/132.08 cm), LC52LE820E LCD panel Advanced Super View & BLACK TFT LCD (40 o/81.28 cm) Advanced Super View & BLACK TFT LCD (46 o/116.84 cm) Advanced Super View & BLACK TFT LCD (52 o/132.08 cm) Resolution 1,920 x 1,080 x 4 pixels Video colour system TV function TV-standard Receiving channel PAL/SECAM/NTSC 3.58/NTSC 4.
Appendix Environmental specifications Item On-Mode (W) (HOME MODE) I J Energy-Save-Mode (W) Advanced K Standby-Mode (W) MAIN POWER switch L Off Mode (W) M Annual Energy Consumption (kWh) Annual Energy Consumptioning N Energy-Save-Mode (kWh) I J K L M N Advanced 40 inch models 46 inch models 52 inch models 71 W 85 W 96 W 69 W 77 W 86 W 0.20 W 0.20 W 0.20 W 0.01 W or less 0.01 W or less 0.01 W or less 103.7 kWh 124.1 kWh 140.2 kWh 100.7 kWh 112.4 kWh 125.
Appendix Rating table for child lock Broadcasted rating User-adjusted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing 4 — — — — — — — — — — — — — — Parental approval pref. 4 4 4 4 4 — — — — — — — — — — X-rated 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Broadcasted rating User-adjusted rating Universal viewing Parental approval pref. X-rated Universal viewing — — — Parental approval pref.
Appendix Dimensional drawings ) : LC-46LE820E ] : LC-40LE820E ( [ LC-52LE820E 1260.0 1260,0 : LC-46LE820E : LC-40LE820E 484.0 484,0 653.0 653,0 811.0 811,0 400.0 400,0 540.0 540,0 39.0 39,0 157.7 157,7 400.0 400,0 172.0 172,0 50.0 50,0 861.0 861,0 1157.0 1157,0 340.0 340,0 LC-46LE820E LC-40LE820E ( 444.0 ) ( 444,0 ) [ 404.0 ] [ 404,0 ] ( 577.6 ) ( 577,6 ) [ 503.2 ] [ 503,2 ] ( 540.0 ) ( 540,0 ) [ 450.0 ] [ 450,0 ] [ 132.0 ] [ 132,0 ] [ 48.0 ] [ 48,0 ] ( 734.0 ) / [ 659.
Appendix ) : LC-46LE810E ] : LC-40LE810E ( [ LC-46LE810E LC-40LE810E : LC-46LE810E : LC-40LE810E ( 575.4 ) ( 575,4 ) [ 500.4 ] [ 500,4 ] ( 444.0 ) ( 444,0 ) [ 404.0 ] [ 404,0 ] ( 540.0 ) ( 540,0 ) [ 450.0 ] [ 450,0 ] [ 132.0 ] [ 132,0 ] [ 48.0 ] [ 48,0 ] ( 733.0 ) / [ 658.0 ] ( 733,0 ) / [ 658,0 ] ( 1020.8) / [ 887.8 ] ( 1020,8) / [ 887,8 ] ( 400.0 ) ( 400,0 ) [ 300.0 ] [ 300,0 ] 39.5 39,5 ( 400.0 ) / [ 300.0 ] ( 400,0 ) / [ 300,0 ] ( 211.0 ) ( 211,0 ) ( 51.0 ) ( 51,0 ) ( 784.0 ) / [ 706.
Appendix End of life disposal 59
Memo 60
The details on this page are only for Russian models Информация на этой странице относится только к моделям, изготовленным для России ИНФОРМАЦИЯ О СЕРТИФИКАЦИИ ПРОДУКЦИИ Жидкокристаллические телевизоры марки «SHARP» Модели: LC-40LE820E/LC-46LE820E/LC-52LE820E/LC40LE810E/LC-46LE810E ME10 Модели: SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse.
http://www.sharp-eu.
