Manual

On=Screen Display Menu
Fora better white balance, usecolor temperature correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of -30 for each color temperature.
R Gain (LO/HI}: -30 through +30
G Gain (LO/HI): -30 through +30
B Gain (LO/HI): -30 through +30
o For resetting all adjustment items to the factory preset
values, press A/T to select "Reset", and then press
ENTER.
Use Motion Enhancement to view fast-action video
more clearly.
120Hz High/120Hz Low: Forobtaining a clearerimage.
Off: Normal image.
o "Motion Enhancement" may cause image noise. Ifthis
occurs, turn the function "Off".
o When AV MODE is set to "GAME" or PC format is being
input, "Motion Enhancement" is not available.
Automatically adjusts the image contrast according to
the scene.
On: Automaticallyadjusts the imagecontrast.
Off: No adjustment.
Adjusts the differences of picture tones between bright
parts and dark parts. The adjustment range of the
gamma can be set to a maximum of +2 and a minimum
of-2 by pressing 4 or _.
Adjusts on-screen black level to your preferred level.
High: The black level gets brighter.
Low: The black level gets darker.
"Black Level" is available for input signal from Composite
Video, Component 480i and analog broadcasts (air and
cable).
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
Advanced(High}/Advanced(Low): Select a desired level
to remove jerkiness from film contents.
Standard: Detects, analyzes, converts film source.
Off: Normal viewing mode.
"Film Mode" does not function when you set AV MODE to
"GAME".
"Standard" does not function when channel display shows
an input signal resolution of 480p, 720p, or 1080p.
"Film Mode" is not available during PC format input.
Produces a clearer video image.
Auto: Automatically adjusts the level of noise reduction.
High/Middle/Low: Select a desired level for viewing a
clearer video image.
Off: No adjustment.
o "Digital Noise Reduction" is not available during PC format
input.
o When AV MODE is set to "GAME", "Auto" is not available.
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
"3D-Y/C" is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of -16.
Max.: -15 through +16
Min.:-16 through +15
The "Range of OPC" settings are active only when "OPC"
is set to "On".
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Q- 25