MODELL LC-46LE830E LC-46LE830RU LC-46LE831E LC-46LE831S LC-40LE830E LC-40LE830RU LC-40LE831E LC-40LE831S BEDIENUNGSANLEITUNG LCD-FARBFERNSEHGERÄT
CE-Hinweis: Hiermit erklärt SHARP Electronics (Europe) GmbH, dass sich das Gerät W-LAN USB-Adapter (WN8522D 7-JU) in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Die Konformitätserklärung kann unter folgender Adresse gefunden werden: http://www.sharp.de/doc/WN8522D 7.pdf. ZUR BEACHTUNG Der drahtlose LAN-USB-Adapter ist nur für die Verwendung in Innenräumen vorgesehen.
[ DEUTSCH ] Einleitung Verehrter SHARP-Kunde Herzlichen Dank für den Kauf dieses LCD-Farb-TV von SHARP. Im Interesse sicherer und langfristig störungsfreier Benutzung dieses Geräts lesen Sie bitte vor der Inbetriebnahme den Abschnitt Wichtige Sicherheitshinweise vollständig durch. Inhaltsverzeichnis Einleitung ................................................................ 1 Verehrter SHARP-Kunde .................................... 1 Inhaltsverzeichnis ...............................................
Einleitung Wichtige Sicherheitshinweise • Reinigung—Das Netzkabel vor der Reinigung des Geräts von der Netzsteckdose abtrennen. Reinigen Sie das Gerät mit einem angefeuchteten Tuch. Verwenden Sie keine flüssigen Reiniger oder Aerosol-Sprays. • Wenn das Panel verschmutzt ist, verwenden Sie zum Abwischen bitte ein feuchtes weiches Tuch. Um das Panel zu schützen, verwenden Sie zum Reinigen bitte keine chemischen Tücher. Die Chemikalien könnten eine Beschädigung oder Risse im Gehäuse des TVs verursachen.
Einleitung Pflege des Gehäuses • Wischen Sie die Oberfläche des Gehäuses vorsichtig mit einem weichen Tuch (Baumwolle, Flanell usw.) ab. • Durch die Verwendung eines chemischen Tuchs (feuchtes/trockenes Wischtuch usw.) können die Bestandteile des Gerätegehäuses beschädigt oder Risse verursacht werden. • Wenn Sie ein hartes Tuch verwenden oder zu fest aufdrücken, kann die Gehäuseoberfläche verkratzt werden. • Falls das Gehäuse stark verschmutzt ist, weichen Sie ein weiches Tuch (Baumwolle, Flanell usw.
Einleitung Mitgeliefertes Zubehör Fernbedienung ( x 1) Sonderzubehör LR03-Alkali-Microbatterie („AAA“) ( x 2) Kabelbinder ( x 1) Für diesen LCD-Farb-TV ist das hier aufgeführte Sonderzubehör erhältlich. Sie können es bei Ihrem Fachhändler erwerben. • Möglicherweise wird in naher Zukunft im Fachhandel weiteres Sonderzubehör verfügbar. Bitte prüfen Sie beim Kauf im neuesten Katalog die Kompatibilität und fragen Sie nach der Erwerbsmöglichkeit. Nr.
Vorbereitung Anbringen des Ständers • Vor den Arbeiten bitte eine Decke oder Ähnliches auf der vorgesehenen Ablagefläche für den TV ausbreiten. So schützen Sie den TV vor einer etwaigen Beschädigung. 3 Schieben Sie den Ständer in die Öffnungen am Boden des TV (halten Sie den Ständer so, dass dieser nicht von der Kante der Arbeitsfläche fällt). VORSICHT Weiches Polster • Befestigen Sie den Ständer in korrekter Ausrichtung. • Stellen Sie sicher, dass die Anweisungen befolgt werden.
Vorbereitung Benutzung der Fernbedienung Einlegen der Batterien Bevor Sie den TV erstmals in Betrieb nehmen, setzen Sie bitte die beiden mitgelieferten LR03-Alkali-Microbatterien („AAA“) ein. Wenn die Batterien erschöpft sind und die Fernbedienung nicht mehr funktioniert, sind sie durch neue LR03-AlkaliMicrobatterien („AAA“) zu ersetzen. Winkel der Fernbedienung Zur Benutzung der Fernbedienung ist diese auf den Fernbedienungssensor zu richten.
Bezeichnungen und Funktionen TV (Vorderseite) TV (Rückseite) – Fortsetzung MAIN POWER-Schalter*4 Beleuchtungs-LED*1 SD CARD (VIDEO STORE)-Steckplatz 3D-Infrarotsender*2 OUTPUT (Kopfhörer/AUDIO (L/R))-Buchse USB 1-Port HDMI 1 (HDMI/ARC)-Buchse OPC-Sensor Fernbedienungssensor I J HDMI 2 (HDMI)-Buchse 3D-Modus: Blaue Frontbeleuchtung 2D-Modus: Weiße Frontbeleuchtung Dieses Gerät gibt ein Infrarotsignal an die 3D-Brille ab, die Sie beim Betrachten von 3D-Bildern tragen.
Bezeichnungen und Funktionen Fernbedienung 1 2 3 15 16 4 5 6 7 17 8 18 9 10 11 19 20 12 21 13 14 22 23 24 1 >a (Bereitsch./Ein) (Seite 19) 2 ATV Für den Zugriff auf den normalen Analog-TV-Modus. DTV Für den Zugriff auf den Digital-TV-Modus. SAT Für den Zugriff auf den Satellitenmodus. RADIO DTV/SAT: Zum Umschalten zwischen dem Radio- und Datenmodus. • Wenn bei DVB nur Datenprogramme (keine Radioprogramme) übertragen werden, werden die Radioprogramme übersprungen.
Kurzanleitung Übersicht über die Bedienung Führen Sie bei der Bedienung des TV der Reihe nach die folgenden Schritte durch. Je nach TV-Installation und Anschlüssen sind einige der Schritte eventuell nicht erforderlich. 1. Vorbereitung – Anschließen des TV 2. Vorbereitung – Einstellen des TV p s w Sprache-Einstellung n w Daheim/Geschäft-Einstellung w Land-Einstellung o q • Stellen Sie den TV nahe an einer Netzsteckdose auf und sorgen Sie dafür, dass der Netzstecker gut zugänglich ist.
Kurzanleitung 3. Fernsehen – Täglicher Betrieb 4. Fernsehen – Erweiterte Funktionen 5. Verwenden zusätzlicher Funktionen 1 Ein- und Ausschalten des TV 1 Verwenden der Time Shift-Funktion 1 Verwenden von Internetdiensten* (Seite 19) zusammen mit dem TV (Seiten 48_50) • Sie können das Gerät über die Fernbedienung und das TV-Bedienfeld ein-/ausschalten.
Kurzanleitung Einsetzen der CA-Karte in das CI-Modul Um verschlüsselte Digitalprogramme empfangen zu können, muss ein Common Interface Module (CIModul) mit einer CA-Karte in den CI-Steckplatz des TV eingesetzt sein. 1 Setzen Sie das CI-Modul vorsichtig mit der Kontaktseite nach vorn in den CI-Steckplatz ein. 2 Das Logo auf dem CI-Modul muss von der TV- Rückseite nach außen gerichtet sein. Kontrollieren der CI-Modul-Informationen Gehen Sie zu „Menü“ > „Setup“ > „Optionen“ > „CI-Menü“.
Kurzanleitung Verwenden des Menüs Zum Vornehmen von Einstellungen für den TV müssen Sie die OSD aufrufen. Eine Liste mit OSD wird als „Menü“ bezeichnet. Das „Menü“ ermöglicht verschiedene Einstellungen und Anpassungen. LCFONT Tipps: Wählen im Menü In dieses Produkt ist LC Font-Technologie eingebettet, die von SHARP Corporation für saubere und ablesefreundliche Zeichenanzeige auf LCDBildschirmen entwickelt wurde. Grundbedienung Wählen Sie mit c/d das gewünschte Menü und drücken Sie dann ;.
Kurzanleitung Verwenden der Softwaretastatur Verwenden Sie die Softwaretastatur, wenn Sie Text eingeben müssen. 6 Zeichensatz 1 2 Groß 3 Fertig 4 Annullieren 5 1 2 3 4 5 8 7 Cursor links Zeichensatz Ändert den Zeichensatz in alphabetische Zeichen, Zahlen, Symbole usw. Groß Ändert die Zeichen in Groß- bzw. Kleinbuchstaben. Fertig Bestätigt die Eingabe. Annullieren Bricht die Eingabe ab und schließt die Softwaretastatur.
Anfängliche Autoinstallation Anfängliche Autoinstallation Wenn der TV nach dem Kauf zum ersten Mal eingeschaltet wird, erscheint der Assistent für die anfängliche Autoinstallation. Folgen Sie bitte den Anzeigen und nehmen Sie der Reihe nach die erforderlichen Einstellungen vor.
Anfängliche Autoinstallation Einstellungen für Digitalprogramme Wählen Sie mit c/d „Terrestrisch“ oder „Kabel“ und drücken Sie dann ;. 3 Drücken Sie a/b zum Wählen von „Suchstart“ 4 5 Terrestrisch E Kabel und drücken Sie dann ;. Wählen Sie mit c/d „Ja“ zum Suchen nach Kabelprogrammen und drücken Sie dann ;. Der TV sucht, sortiert und speichert alle TVProgramme, die bei den aktuellen Einstellungen mit der angeschlossenen Antenne empfangbar sind.
Anfängliche Autoinstallation Suchen nach Satellitenprogrammen (nur Modellreihe 830) 1 Wenn Sie die Einstellung für den Antennenanschluss ändern: Wählen Sie mit c/d „Einstellung ändern“ und drücken Sie dann ;. Wählen Sie mit c/d „Ja“ und drücken Sie dann ;. Ja 3 Wählen Sie mit a/b/c/d den bevorzugten Satelliten und drücken Sie dann ;. • „Weiter“ kann nur gewählt werden, wenn Sie in Schritt 3 das Satellitenprogramm eingestellt haben.
Anfängliche Autoinstallation 7 Wählen Sie mit a/b „OK“ und drücken Sie dann ;. Nach Abschluss dieser Einstellung wird der in der linken Spalte auf Seite 16 dargestellte DVB-S/ S2-Einstellungen-Bildschirm angezeigt. ZUR BEACHTUNG • Befolgen Sie die angezeigten Anweisungen für die Einstellungen „2 Satelliten auf 22-kHz-Switchbox“, „2 Satelliten auf Tonburst-Switchbox“, „Max. 4 Satelliten auf DiSEqC-Multiswitch“ und „SatellitenGemeinschaftsanlage“.
Anfängliche Autoinstallation Prüfen der Signal- und Kanalstärke (DVB-T/T2*1/C/S*2/S2*2) Wenn Sie eine DVB-T/T2/C/S/S2-Antenne neu installieren oder positionieren, sollten Sie die Ausrichtung der Antenne anhand der Antennensetup-Anzeige auf guten Empfang optimieren. I J Nur Modellreihe 831 Nur Modellreihe 830 E 4 Wählen Sie mit a/b „Kanalstärke“ und drücken Sie dann ;. E Signalstärke Kanalstärke „Bildeinstellungen“ > „Kanaleinstellungen“ > „Antennensetup - DIGITAL“.
Fernsehen Täglicher Betrieb Ein- und Ausschalten Ein- und Ausschalten des Geräts ZUR BEACHTUNG • Wenn der TV längere Zeit nicht benutzt wird, stellen Sie sicher, dass das Netzkabel von der Netzsteckdose getrennt oder der MAIN POWER-Schalter auf der Rückseite des TV ausgeschaltet (a) wird (Seite 7). • Eine geringe Menge Strom wird auch dann verbraucht, wenn der MAIN POWER-Schalter ausgeschaltet (a) ist (Seite 7).
Fernsehen Wählen des Tonmodus E DTV/SAT-Modus Falls mehrere Tonmodi verfügbar sind, kann der Modus mit 7 folgendermaßen weitergeschaltet werden. Audio (ENG) Li./Re. STEREO Li. Re. Li.Re. Wählen bei A2 TV-Fernsehprogrammen Signal Wählbare Punkte Stereo STEREO, MONO Bilingual CH A, CH B, CH AB Mono MONO ZUR BEACHTUNG • Wenn kein Eingangssignal anliegt, wird als Tonmodus „MONO“ angezeigt. ZUR BEACHTUNG • Überspringen Sie Schritt 1, wenn Sie DTV-/SATProgramme empfangen.
Fernsehen EPG Optionen Der EPG ist eine elektronische Programmzeitung, die auf dem Bildschirm angezeigt wird. Über den EPG können Sie die Sendezeiten von DTV-, SAT-, RADIO- und DATAProgrammen einsehen, nähere Einzelheiten zu den Programmen abrufen und auf gerade laufende Events (Ereignisse) abstimmen. Praktische EPG-Einstellungen Bildeinstellungen EPG Wählen Sie „Ja“, wenn Sie den EPG für digitale Programme wünschen.
Fernsehen 4 Programm in einer Kategorie suchen Wählen eines Programms über den EPG 5 Programm nach Datum und Uhrzeit suchen Die Illustrationen auf dieser Seite zeigen zur Erläuterung dreistellige Dienste. EPG-Anzeige aufrufen/schließen Drücken Sie EPG. AM PM 1 Drücken Sie G. 1 Drücken Sie Y. 2 Wählen Sie mit a/b das gewünschte 2 Wählen Sie mit c/d das Programm-Info Nach Genre suchen Nach Datum suchen Timerliste 3 Genre und drücken Sie dann ;.
Fernsehen Timer-Setup über EPG Teletext Sie können zu einer voreingestellten Zeit auf ein Programm umschalten. 1 Drücken Sie EPG. 2 Wählen Sie mit a/b/c/d das einzustellende Programm und drücken Sie dann ;. Programm-Info Was ist Teletext? Teletext bezeichnet von den Sendeanstalten zur Information und Unterhaltung ausgestrahlte Textdaten, die mit entsprechend ausgestatteten TVs empfangbar sind. Der TV decodiert die empfangenen Teletextsignale zum Betrachten auf ein grafisches Format.
Anschließen von externen Geräten Einführung zu den Anschlüssen Kabel mit ø 3,5-mm-Stereo-Miniklinke Der TV ist mit den unten gezeichneten Anschlussbuchsen ausgestattet. Verwenden Sie das für die jeweilige TV-Buchse geeignete Kabel und verbinden Sie damit die Geräte. E Vor dem Anschließen … HDMI-Gerät (Seite 25) DVI/HDMI-Kabel HDMI-geprüftes Kabel • Schalten Sie unbedingt den TV und alle anderen Geräte aus, bevor Sie Anschlüsse vornehmen.
Anschließen von externen Geräten DVI/HDMI-Konvertierung Videoanschlüsse Mit Hilfe eines DVI/HDMI-Kabels können auch digitale Videosignale von DVD über den kompatiblen HDMI-Anschluss wiedergeben werden. Der Ton muss separat eingespeist werden. HDMI-Anschluss • Wenn ein DVI/HDMI-Kabel an den HDMI-Anschluss angeschlossen wird, erhalten Sie eventuell kein sauberes Bild. • HDMI und DVI verwenden dieselbe Kopierschutzmethode (HDCP).
Anschließen von externen Geräten SCART-Anschluss Y Beispiele für anschließbare Geräte PB (CB) PR (CR) Komponentenanschluss Beispiele für anschließbare Geräte E VCR E DVD-Spieler/Recorder E VCR E DVD-Spieler/Recorder Der Anschluss eines DVD-Spielers/Recorders oder anderen Geräts über EXT 3 ermöglicht eine verbesserte Farbwiedergabe und hohe Bildqualität.
Anschließen von externen Geräten Audioverbindungen VIDEO-Anschluss Lautsprecher/Verstärker-Anschluss Beispiele für anschließbare Geräte E E E E VCR DVD-Spieler/Recorder Spielekonsole Camcorder Schließen Sie ggf. wie unten gezeigt einen Verstärker mit externen Lautsprechern an. E Anschließen eines Verstärkers mit digitalen/analogen Toneingängen n Sie können die Buchse EXT 2 für den Anschluss von Geräten wie Spielekonsole, Camcorder oder DVD-Spieler/Recorder verwenden.
AQUOS LINK Steuern von HDMI-Geräten über AQUOS LINK E Was ist AQUOS LINK? Mit Hilfe des HDMI CEC-Protokolls ermöglicht AQUOS LINK interaktive Bedienung von kompatiblen Systemgeräten (AV-Verstärker, DVDSpieler/Recorder, Blu-ray-Spieler/Recorder) über eine einzige Fernbedienung. ZUR BEACHTUNG • Nach der Markteinführung dieses TV ist auch die Einführung eines AQUOS LINK-kompatiblen AQUOS AUDIO-Lautsprechersystems und AQUOS-Recorders vorgesehen.
AQUOS LINK AQUOS LINK-Anschluss Schließen Sie als Erstes das AQUOS AUDIO-Lautsprechersystem oder einen AQUOS BD-Spieler/AQUOS-Recorder mit Unterstützung des HDMI CECProtokolls an.
AQUOS LINK AQUOS LINK-Einstellungen Grundbedienung Gehen Sie zu „Menü“ > „Link-Betrieb“ > „AQUOS LINK-Einstellungen“ > und wählen Sie das einzustellende Menü. AQUOS LINK-Steuerung Wählen Sie für diesen Punkt „Ein“, um die HDMI CEC-Funktionen zu aktivieren. Einschalt-Automatik Wenn aktiviert, ist die One Touch Play-Funktion verwendbar. Wenn der TV auf Bereitschaft geschaltet ist, schaltet er sich automatisch ein und gibt das Bild von der HDMI-Signalquelle wieder.
AQUOS LINK Topmenü/Titelliste Dieser Abschnitt erläutert, wie ein auf dem AQUOS BD-Spieler/AQUOS-Recorder gespeicherter Titel wiedergeben wird. 1 Wählen Sie mit a/b „Topmenü/Titelliste“ und drücken Sie dann ;. • Der verbundene Recorder schaltet sich ein und der TV wählt automatisch die geeignete externe Eingangsquelle. • Die Titellistendaten vom angeschlossenen AQUOS BD-Spieler/AQUOS-Recorder erscheinen. 2 Mit @ blenden Sie das Menü aus und können die Tasten a/b/c/d verwenden.
Grundeinstellung Bildeinstellungen Gehen Sie zu „Menü“ > „Setup“ > „Bild“. AUTO Menü KAN-Liste :OK Setup STANDARD :Zurück FILM Bild SPIELE PC*1 AV-Modus OPC [Aus] ANWENDER Hintergr.-Bel. 3D-Helligkeitsverstärkung [Mittel] x.v.
Grundeinstellung Bild Weiterführend Dieser TV besitzt eine Reihe weiterführender Funktionen zur Optimierung der Bildqualität. Gehen Sie zu „Menü“ > „Setup“ > „Bild“ > „Weiterführend“. Farbeinst.-Farbton Diese Funktion dient zur Anpassung einer gewählten Farbe über ein Anpasssystem für sechs Farben. Farbeinst.-Sättigung Diese Funktion dient zum Erhöhen und Vermindern des Sättigungsgrads einer gewählten Farbe über ein Anpasssystem für sechs Farben. Farbeinst.
Grundeinstellung Schwarz/Weiß Zum Betrachten eines Videos in Schwarz/Weiß. OPC-Bereich Der Helligkeitsstufenbereich für die automatischen Anpassungen des OPC-Sensors kann den eigenen Präferenzen gemäß eingestellt werden. Der Anpassbereich des OPC-Sensors erstreckt sich von max. e 16 bis min. f 16. ZUR BEACHTUNG • Diese Funktion ist nur verfügbar, wenn die Einstellung „OPC“ auf „Ein“ oder „Ein:Display“ eingestellt ist. • Der Wert der Max.-Einstellung kann nicht kleiner als der Wert der Min.
Grundeinstellung Toneinstellungen Gehen Sie zu „Menü“ > „Setup“ > „Ton“. Menü Setup KAN-Liste :OK Ton Ton Klangregelung Sprachverbesserung Mit den nachstehenden Einstellungen können Sie das Klangbild wunschgemäß regeln. Punkt :Zurück Höhen Ton STANDARD Bass Lautst.-Abgleich [Aus] Balance Höhen Bass Lautst.-Abgleich Verschiedene Klangquellen besitzen nicht immer die gleiche Grundlautstärke, wie z.B. bei einem Programm und seinen Werbespots.
Grundeinstellung Stromspareinstellungen Gehen Sie zu „Menü“ > „Setup“ > „ECO“. Menü KAN-Liste :OK Setup :Zurück ECO ECO ECO Energiesparung Auto System aus Diese Funktion verringert wie in der nachstehenden Tabelle gezeigt die Helligkeit der Hintergrundbeleuchtung, um den Stromverbrauch zu reduzieren und die Lebensdauer der Hintergrundbeleuchtung zu verlängern.
Grundeinstellung 4 Wählen Sie mit a/b den zu suchenden Bildeinstellungen Sendestandard und drücken Sie dann ;. Gehen Sie zu „Menü“ > „Setup“ > „Bildeinstellungen“. E Beziehen Sie sich nach dem Wählen des zu suchenden Dienstes, entweder „Terrestrisch“ oder „Kabel“, auf Einstellungen für Digitalprogramme auf Seite 15.
Grundeinstellung Tasten für „Manuelle Einstellung“ Sperre Drücken Sie Taste R. Wenn ein Programm gesperrt ist, muss die Geheimnummer eingegeben werden, wenn dieses aufgerufen werden soll. Kanal überspringen Drücken Sie Taste G. Dienste, die mit einem ✔ markiert sind, werden beim Drücken von :r/s am TV oder der TVFernbedienung übersprungen. Löschen Drücken Sie Taste Y. Der gewählte Dienst wird gelöscht.
Grundeinstellung Analog-Tuner- Einstellung Sie können die Einstellungen für analoge TV-Kanäle automatisch oder manuell neu konfigurieren. E Zusätzliche Suche Verwenden Sie dieses Menü, um nach der Ausführung von „Analogsuche“ im „Autoinstallation“-Menü neue Dienste automatisch hinzuzufügen. • Starten Sie die Kanalsuche nach dem Wählen von Farbsystem und Tonsystem. E Manuelle Einstellung Verwenden Sie dieses Menü zum manuellen Einrichten von TV-Kanälen.
Grundeinstellung TV-Startzeit-Einstellung Bildeinstellungen Schnellstart Sie können die nach dem Einschalten des TV mit der Fernbedienung erforderliche Startzeit verkürzen. Gehen Sie zu „Menü“ > „Setup“ > „Bildeinstellungen“ > „Schnellstart“. Ein Aus Punkt Schneller Start des TV aus der Bereitschaft. In Bereitschaft beträgt die Leistungsaufnahme mindestens 14 W. Im Bereitschaftszustand ist der Stromverbrauch gering. Individuelle Einstellungen – Geheimnr. Bildeinstellungen Geheimnr.
Grundeinstellung Individuelle Einstellungen – Sprache Bildeinstellungen Digital Audio Sprache Stellen Sie bis zu drei bevorzugte Multi-AudioSprachen für die Anzeige bei vorhandenen Audiosprachen ein. Gehen Sie zu „Menü“ > „Setup“ > „Bildeinstellungen“ > „Individuelle Einstellungen“ > „Digital Audio Sprache“. E Umschalten der Multi-Audio-Sprachen Mit jedem Drücken von 7 an der Fernbedienung wechselt die Audiosprache.
Praktische Betrachtungsfunktionen ZUR BEACHTUNG Einstellungen für optionale Funktionen Gehen Sie zu „Menü“ > „Setup“ > „Optionen“. Menü KAN-Liste :OK Setup :Zurück Optionen Bildoptionen 3D-Setup AQUOS LINK- Einstellungen Buchseneinstellung Manuelles Wählen der Bildgrößen Optionen Breitbildmodus Sie können die Bildgröße wählen. Welche Bildgrößen wählbar sind, richtet sich nach der Art des Eingangssignals. 1 Gehen Sie zu „Menü“ > „Setup“ > „Bildoptionen“ > „Breitbildmodus“.
Praktische Betrachtungsfunktionen Manuelles Wählen des Breitbildmodus (WSS) Buchseneinstellung Optionen 4:3 Bildformat Das „Breitbildmodus (WSS)“-Signal schaltet automatisch auf 4:3 um; hierfür kann zwischen „Normal“ und „Panorama“ gewählt werden. Gehen Sie zu „Menü“ > „Setup“ > „Optionen“ > „4:3 Bildformat“. Normal Panorama Punkt Normalzone für Bildseitenverhältnis 4:3 oder 16:9. Breitbild ohne seitliche Balken.
Praktische Betrachtungsfunktionen Eingangsquelle-Einstellungen Optionen KAN-Liste Kopfhörer/Audioausgang wählen Optionen Eingangswahl Zum Einstellen des Signaltyps eines externen Geräts. 1 Wählen Sie mit b die Eingangsquelle zum Einstellen des Eingangssignals („EXT1) im „EINGANG“-Menü und drücken Sie dann ;. 2 Gehen Sie zu „Menü“ > „Setup“ > „Optionen“ > „Buchseneinstellung“ > „Eingangswahl“.
Praktische Betrachtungsfunktionen Bildschirmeffekt-Einstellungen Optionen Kanalwahleffekt Diese Funktion erzeugt beim Wählen oder Wechseln der Kanäle einen Bildschirmeffekt. Gehen Sie zu „Menü“ > „Setup“ > „Optionen“ > „Bildschirmeffekt“ > „Kanalwahleffekt“. Optionen ZUR BEACHTUNG • Die Einstellungen werden nach Eingangsquellen getrennt gespeichert. • Je nach Eingangssignaltyp, „Breitbildmodus“Einstellung oder „Videomodus“ für den USB-MedienModus ist eine Bildlage-Einstellung eventuell nicht möglich.
Praktische Betrachtungsfunktionen Zusätzliche Funktionen Optionen Beleuchtung Mit dieser Funktion leuchtet die LED auf der Frontseite des TV auf verschiedene Weise auf. Gehen Sie zu „Menü“ > „Setup“ > „Optionen“ > „Beleuchtung“. Aus Bereitsch. Betrachten Immer Punkt Die LED leuchtet nicht auf. Die LED leuchtet, wenn sich der TV im Bereitschaftsmodus befindet. Die LED leuchtet auf, während Sie fernsehen. Die LED leuchtet immer auf. ZUR BEACHTUNG • Die Werksvorgabe für diesen Punkt ist „Betrachten“.
Weitere praktische Funktionen Verwenden eines USB-Geräts Bei Verwendung eines USB-Geräts sind auf dem TV bestimmte Funktionen verfügbar. Nach dem Anschließen eines USB-Geräts an den USB-Port können Sie die gewünschten Funktionen auswählen, und der TV startet die Einstellungen für die einzelnen Funktionen. USB-Verwendung • Speichergerät für Time Shift • USB-Medien zur Verwendung von Fotos, Musikdateien und Videos Anschließen eines USB-Geräts Schließen Sie wie unten ein USB-Gerät an den TV an.
Weitere praktische Funktionen Time Shift Tasten für Time Shift-Bedienung Tasten Mit dieser Funktion können Sie das digitale TVoder Satellitenprogramm unterbrechen und die Wiedergabe später mit dieser Szene fortsetzen. READY I 1 Drücken Sie READY. H • Der TV beginnt mit der temporären Aufnahme der Echtzeitsendung im Hintergrund. 2 Drücken Sie I. • Der TV zeigt das Programm ab der Szene, bei der die Aufnahme gestartet wurde, und die Aufnahme wird fortgesetzt.
Weitere praktische Funktionen Beispiele für die Verwendung von Time Shift Wenn Sie sich eine Weile nicht in der Nähe des TV befinden (drücken Sie in diesem Fall READY) Kanalanzeige Kanal-Info wird durch Drücken von p an der Fernbedienung angezeigt. Ohne Time Shift Abwesend Während Ihrer Abwesenheit verpassen Sie die Szene. Mit Time Shift Ton (ENG) STEREO Video Untertitel Aus >> Neue Information Abwesend Sie können die verpasste Szene anschauen, wenn Sie wieder zurückkommen.
Weitere praktische Funktionen Optionen Geräteregistrierung Sie müssen diese Funktion ausführen, um das USBSpeichergerät für Time Shift zu registrieren. Gehen Sie zu „Menü“ > „Setup“ > „Optionen“ > „Time Shift-Einstellungen“ > „Geräteregistrierung“. • Näheres zum Registrieren eines USBSpeichergeräts finden Sie unter Für Time Shift (Seite 47). ZUR BEACHTUNG • Nur ein USB-Speichergerät kann für Time Shift registriert werden.
Weitere praktische Funktionen USB-Medien/Heimnetzwerk USB-Medien/Heimnetzwerk In beiden Modi können Sie von externen USB-Geräten (USB-Speicher, USBKartenleser (Massenspeicher-Klasse), USB-HDD) oder vom Heimnetzwerkserver eingespeiste Fotos betrachten, Musik hören und Videos anschauen. ZUR BEACHTUNG • Informationen zum Anschließen eines Heimnetzwerkservers finden Sie unter Netzwerk-Einstellungen (Seite 60). • Manche USB-Geräte werden für diese Funktion möglicherweise nicht ordnungsgemäß ausgeführt.
Weitere praktische Funktionen Vergrößerte Fotos anzeigen Tasten für die Anzeige vergrößerter Fotos (Bei Verwendung des USB-Medien-Modus) Tasten c/d (Cursor) 6 3D Taste R Taste G Taste B p Beschreibung Ruft das vorherige/nächste Foto im selben Verzeichnis auf. Ruft die Miniaturbildwahl-Anzeige zurück. Schaltet zwischen dem 2D- und 3D-Modus um. Dreht das Foto um 90 Grad nach links. Dreht das Foto um 90 Grad nach rechts. Zeigt das „USB-Medien-Menü“ an.
Weitere praktische Funktionen Musik-Modus Videomodus Tasten für Dateiwahl-Bedienung (Bei Verwendung des USB-Medien-Modus) Tasten ; a/b/c/d (Cursor) 6 * Dieses Bildschirmfoto bezieht sich auf den USBMedien-Modus. Der Bildschirm im HeimnetzwerkModus kann geringfügig davon abweichen. Tasten für Musik-Modus-Bedienung (Bei Verwendung des USB-Medien-Modus) Tasten ; a/b/c/d (Cursor) 6 Taste R Taste G Taste Y Taste B Beschreibung Beim Wählen einer Musikdatei: Spielt die Musik ab.
Weitere praktische Funktionen Bildeinstellungen DivX®-Setup Mit dieser Funktion bestätigen Sie Ihren Registrierungscode. Sie müssen den Code auf der Website www.divx.com registrieren. Gehen Sie zu „Menü“ > „Setup“ > „Bildeinstellungen“ > „DivX®-Setup“. E DivX® VOD-Registrierung In diesem Menü finden Sie Ihren Registrierungscode. Sie müssen den TV auf der Website www.divx. com registrieren, um DivX-Inhalte wiedergeben zu können.
Anschließen eines PC Anschließen eines PC PC HDMI-Anschluss PC Anzeigen eines PC-Bilds auf dem TV Analoger Anschluss Buchse PC* Wählen der Bildgröße Sie können die Bildgröße wählen. Buchse HDMI 1, 2, 3 oder 4 1 Drücken Sie f. • Das „Breitbildmodus“-Menü erscheint. 2 Wählen Sie mit f oder a/b den gewünschten HDMI-geprüftes Kabel (im Fachhandel erhältlich) PC RGB-Kabel (im Fachhandel erhältlich) PC Kabel mit ø 3,5-mmStereo-Miniklinke (im Fachhandel erhältlich) Punkt.
Anschließen eines PC PC-Bildlage automatisch einstellen PC-Bildlage manuell einstellen Optionen Optionen Auto-Sync. Fein-Sync. Diese Funktion stellt das Bild automatisch auf die bestmögliche Bildlage ein, wenn TV und PC mit Hilfe eines im Fachhandel erhältlichen DVI/RGBKonverterkabels usw. über die analogen Buchsen verbunden sind. 1 Wählen Sie mit b „PC“ im „EINGANG“-Menü und drücken Sie dann ;. 2 Gehen Sie zu „Menü“ > „Setup“ > „Optionen“ > „Buchseneinstellung“ > „PC-Signaleinstellung“ > „Auto-Sync.
Anschließen eines PC Tabelle zur PC-Kompatibilität Auflösung Horizontalfrequenz Vertikalfrequenz Analog (D-Sub) Digital (HDMI) VESAStandard VGA 640 x 480 31,5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 x 600 37,9 kHz 60 Hz ✔ ✔ ✔ XGA 1.024 x 768 48,4 kHz 60 Hz ✔ ✔ ✔ WXGA 1.360 x 768 47,7 kHz 60 Hz ✔ ✔ ✔ 64,0 kHz 60 Hz ✔ ✔ ✔ 65,3 kHz 60 Hz ✔ ✔ ✔ 75,0 kHz 60 Hz ✔ ✔ ✔ 67,5 kHz 60 Hz ✔ ✔ SXGA SXGA+ UXGA 1080p 1.280 x 1.024 1.400 x 1.050 1.600 x 1.200 1.920 x 1.
Anschließen eines PC PC-Steuerung des TV • Wenn ein Programm eingestellt ist, kann der TV per RS-232C oder IP mit einem PC gesteuert werden. Dies umfasst das Umschalten des Eingangs (PC/Video), das Regeln der Lautstärke und verschiedene andere Regel- und Einstellmöglichkeiten, was automatische programmierte Wiedergabe ermöglicht. • Verwenden Sie für die Anschlüsse ein serielles RS232C-Steuerkabel (überkreuzt), ein ETHERNET-Kabel (im Fachhandel erhältlich) oder einen drahtlosen LANUSB-Adapter.
Anschließen eines PC Befehlsliste Gegenstand Befehl Parameter Steuerungsinhalt Versorgung P O W R 0 _ _ _ Strom AUS (Bereitschaft) Eingangswahl A I _ _ _ Eingangsumschaltung (Toggle) Kanal T G D _ I T V D _ _ _ _ TV (Kanal fix) I D T V _ _ _ _ DTV (Kanal fix) I A V D * _ _ _ EXT 1_3 (1_3), HDMI 1_4 (4_7), PC (8) D C C H * * _ _ TV-Direktwahl (1_99) C H U P _ _ _ _ Kanal aufwärts C H D W _ _ _ _ Kanal abwärts D T V D * * _ DREISTELLIGER DIREKT-KANAL (1_999)
Netzwerk-Einstellungen Anschließen an das Netzwerk Wenn Sie Internetdienste nutzen möchten, müssen Sie den TV an einen Router mit einer Hochgeschwindigkeitsverbindung zum Internet anschließen. Sie können den TV über einen Router oder Zugriffspunkt auch mit Ihrem Heimnetzwerkserver verbinden. Die Verbindung zwischen TV und Router kann verdrahtet oder drahtlos sein. Sie dann ;. Verwenden Sie ein ETHERNET-Kabel, um wie im Folgenden dargestellt den Router an die ETHERNET-Buchse des TV anzuschließen.
Netzwerk-Einstellungen Drahtlose Installation Verwenden Sie den im Lieferumfang des TV enthaltenen drahtlosen LAN-USB-Adapter. E Übersicht über die drahtlose Verbindung 1 Schalten Sie den Router ein, bevor Sie mit der 2 Netzwerkinstallation beginnen. Schließen Sie den (mitgelieferten) drahtlosen LAN-USB-Adapter an den USB 3 (WIRELESS LAN)-Port an der Rückseite des TV an.
Net TV Was ist Net TV? Net TV bietet auf Ihren TV zugeschnittene Internetdienste und Websites. Zum Browsen auf den Net TV-Seiten verwenden Sie die Fernbedienung des TV. Mit Hilfe von Net TV können Sie Filme wiedergeben, Bilder anzeigen, Musik anhören, Videospiele spielen, einen Film in einem Video-Shop ausleihen* usw. Net TV bietet für jedes Land eine Vielzahl von Diensten. Sie können auch die Dienste anderer Länder in Anspruch nehmen.
Net TV E Erneut laden Aktualisiert die angezeigte Seite. Falls beim Laden der Seite ein Fehler auftritt, führen Sie diese Funktion aus, um die Seite erneut zu laden. Wählen Sie „Erneut laden“ und drücken Sie dann ;. E Zoom Passt die Größe der angezeigten Seite an. Zoom • Zum Ausführen von „Net TV-Speicher leeren“ ist die Geheimnummer einzugeben. Die Vorgabe für die Geheimnummer ist „1234“. Informationen zum Ändern der eingestellten Geheimnummer finden Sie unter Individuelle Einstellungen – Geheimnr.
Net TV Haftungsausschluss und Softwarelizenzen für Net TV * In diesem Abschnitt finden Sie den (englischen) Originaltext. HAFTUNGSAUSSCHLUSS Dieses Produkt enthält den Browser Opera™. • • • Dieses Produkt enthält Schriftarten der Monotype Imaging Inc. • Monotype® ist eine im Patent- und Markenamt der USA eingetragene Marke der Monotype Imaging Inc. und kann in bestimmten Gerichtsständen eingetragen sein. • Tioga™ ist eine Marke der Monotype Imaging Inc.
Betrachten von 3D-Bildern Mit der separat erhältlichen 3D-Brille (AN-3DG10-S/R/A) können Sie 3D unterstützende Bilder auf dem TV betrachten. Bezeichnung ZUR BEACHTUNG 6 5 1 • Im 3D-Modus sind bestimmte Menüpunkte ausgegraut. Dies ist kein Hinweis auf ein Problem. 3 4 Vorbereitung für die 3D-Brille 2 Machen Sie sich mit der Benutzung der 3D-Brille vertraut, bevor Sie damit 3D unterstützende Bilder betrachten.
Betrachten von 3D-Bildern Ersetzen der Knopfzellenbatterie 3 Wenn die Batterie aus der Halterung vorsteht, nehmen Sie sie bitte mit den Fingern heraus. Die voraussichtliche Betriebsdauer der Batterie beträgt ungefähr 75 Stunden. • Bei schwacher Batterieleistung blinkt die LED-Leuchte nach dem Einschalten sechsmal. • Verwenden Sie als Ersatzbatterie stets eine Knopfzelle des vorgeschriebenen Typs (Hitachi Maxell: LithiumKnopfzelle CR2032).
Betrachten von 3D-Bildern Winkelbereich der 3D-Brille Die 3D-Brille kann durch Empfangen eines vom TV gesendeten Infrarotsignals benutzt werden. Die 3D-Brille schaltet sich automatisch aus, wenn sie drei Minuten lang kein Signal mehr vom TV empfängt. Betriebsbereich Anbringen der 3D-Brille-Schnur Bringen Sie erforderlichenfalls die 3D-Brille-Schnur an (z.B. wenn die Brille zu verrutschen droht).
Betrachten von 3D-Bildern • Achten Sie beim Betrachten von 3D-Bildern darauf, dass die 3D-Brille waagerecht zum TV-Bildschirm bleibt. Wenn die 3D-Brille schräg zum TV-Bildschirm getragen wird, können die mit dem linken und rechten Auge gesehenen Bilder wesentlich voneinander abweichen oder sich gegenseitig überschneiden. • Achten Sie beim Betrachten von 3D-Bildern auf einen angemessenen Abstand zum TV-Bildschirm.
Betrachten von 3D-Bildern Betrachten von 3D-Bildern 2 Schalten Sie die 3D-Brille ein und setzen Sie die 3D-Brille dann auf. • Drücken Sie mindestens zwei Sekunden lang die Stromtaste. • Die LED-Leuchte blinkt dreimal. 2 Wählen Sie mit c/d „3D“ oder „2D“ und drücken Sie dann ;. E 1 Wählen Sie mit c/d den 3D-Signaltyp („2D s 3D“, „Nebeneinander“ oder „Übereinander“) und drücken Sie dann ;.
Betrachten von 3D-Bildern Betrachten von 2D-Bildern in 3D Sie können normale 2D-Bilder in 3D-Bilder konvertieren. 1 Drücken Sie 3D. 2 Wählen Sie mit c/d „2D s 3D“ und drücken Sie dann ;. 3 Schalten Sie die 3D-Brille ein und setzen Sie die 3D-Brille dann auf. 3D-Menü Drücken von 3D im 3D-Modus zeigt das 3D-Menü an. Nehmen Sie mit den Farbentasten die erforderlichen Einstellungen vor.
Betrachten von 3D-Bildern 3D-Helligkeitsverstärkung Sie können die Hintergrundbeleuchtung des TVs an 3D-Bildbetrachtung anpassen. Hoch Punkt Der Bildschirm hellt sich auf Mittel Tief Der Bildschirm verdunkelt sich ZUR BEACHTUNG • Wenn „Hoch“ oder „Mittle“ gewählt ist, sind „OPC“, „Hintergr.-Bel.“ und „OPC-Bereich“ nicht verfügbar. • Im 2D-Modus ist „3D-Helligkeitsverstärkung“ nicht verfügbar.
Betrachten von 3D-Bildern Technische Daten – 3D-Brille (separat erhältlich) 3D-Brille AN-3DG10-S/AN-3DG10-R/AN-3DG10-A Flüssigkristallverschluss 3 V Gleichspannung Lithium-Knopfzelle (CR2032 × 1) Ca. 75 Stunden Dauerbetrieb 172,7 × 47,5 × 170,0 mm 65,0 g (einschließlich Lithium-Knopfzelle) 10 °C bis 40 °C (Bei sehr hohen oder niedrigen Temperaturen ist die Funktion der 3D-Brille nicht gewährleistet. Nur im angegebenen Betriebstemperaturbereich benutzen.
Betrachten von 3D-Bildern Gläser der 3D-Brille • Setzen Sie die Brillengläser der 3D-Brille keinem Druck aus. Lassen Sie die 3D-Brille nicht fallen und biegen Sie sie nicht. • Kratzen Sie nicht mit spitzen Gegenständen oder anderen Objekten auf der Oberfläche der Brillengläser der 3D-Brille. Die 3D-Brille könnte dadurch beschädigt und die Qualität der 3D-Bilder beeinträchtigt werden. • Verwenden Sie zum Reinigen der 3D-Brille nur das mitgelieferte Brillentuch.
Anhang Fehlersuche Problem • Kein Strom. • Kein Betrieb möglich. • Kein Ansprechen auf Fernbedienung. • Bild verstümmelt. • Verfärbungen, Farbe blass oder zu dunkel, schlechter Farbabgleich. • Plötzliches Ausschalten. Lösungsansätze • Schalten Sie den MAIN POWER-Schalter auf der Rückseite des TV ein (;) (Seite 19). • Ist das Netzkabel abgetrennt? • Kontrollieren Sie, ob
Anhang Updaten des TV über DVB-T/T2* 2 Folgen Sie den Anleitungen auf dem Bildschirm. Halten Sie Ihre Software-Version stets auf dem neuesten Stand. SHARP stellt von Zeit zu Zeit aktualisierte Versionen der TV-Basis- und DVBSoftware zur Verfügung. * Nur Modellreihe 831 Ja Bildeinstellungen Download-Setup Gehen Sie zu „Menü“ > „Setup“ > „Bildeinstellungen“ > „Individuelle Einstellung“ > „Bereitschaftssuche“ > „Download-Setup“. Suchen nach Updates* * Alle Länder außer U.K.
Anhang Informationen zur Software-Lizenz für dieses Produkt Information Software-Lizenz In diesem Menü können Sie die Software-Lizenzen abrufen. Gehen Sie zu „Menü“ > „Setup“ > „Information“ > „Software-Lizenz“. E Software-Komposition Die in dieses Produkt einbezogene Software umfasst verschiedene Softwarekomponenten, an denen SHARP oder dritte Parteien die Urheberrechte besitzen.
Anhang Warnung zur grundlegenden Verwendung Marken Vorsichtsmaßregeln zur Benutzung bei hohen und niedrigen Umgebungstemperaturen • „HDMI, das HDMI-Logo und High-Definition Multimedia Interface sind Marken oder eingetragene Marken der HDMI Licensing LLC in den USA und anderen Ländern.“ • Wenn der TV bei niedrigen Temperaturen (z.B. unbeheizter Raum, Büro) verwendet wird, kann das Bild nachziehen oder leicht verzögert angezeigt werden.
Anhang Technische Daten Punkt LCD-Panel Auflösung Videofarbsystem TVTV-Norm Funktion Analog Digital LCD-Farb-TV (46o/117 cm), LCD-Farb-TV (40o/102 cm), LC-46LE830E LC-40LE830E LC-46LE830RU LC-40LE830RU LC-46LE831E LC-40LE831E LC-46LE831S LC-40LE831S 117 cm (46 o) X-Gen panel 102 cm (40 o) X-Gen panel 1.920 x 1.080 x 4 Punkte PAL/SECAM/NTSC 3.58/NTSC 4.
Anhang Technische Daten (Drahtloser LAN-USB-Adapter) Produktbezeichnung Standard Hostschnittstelle Frequenzband Dual Band 802.11n USB2.0-Adapter IEEE 802.11a/b/g/n USB2.
Anhang Umweltrelevante technische Daten Befestigen des TV an einer Wand Punkt 46-Zoll-Modelle 40-Zoll-Modelle I Ein-Modus (W) (Heim-Modus) EnergieeinsparungWeiterführend J Modus (W) 76 W 63 W 61 W 52 W 0,20 W 0,20 W 0,01 W oder weniger 0,01 W oder weniger 111,0 kWh 92,0 kWh 89,1 kWh 75,9 kWh K Bereitschaft-Modus (W) L Aus-Modus (W) MAIN POWERSchalter M Jahresstromverbrauch (kWh) Jahresstromverbrauch N im Energieeinsparung- Weiterführend Modus (kWh) I J K L M N Gemessen nach IEC 62087 E
Anhang Einstufungentabelle für Kinderschutz Vom Anwender angepasste Einstufung Unbegrenzte Freigabe Liste der Abkürzungen Gesendete Einstufung Alter 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ✔ — — — — — — — — — — — — — — Vorzugsweise mit Zustimmung der Eltern ✔ ✔ ✔ ✔ ✔ — — — — — — — — — — X-rated ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Gesendete Einstufung Vom Anwender angepasste Einstufung Unbegrenzte Freigabe Vorzugsweise mit Zustimmung der Eltern X-ra
Anhang Maßzeichnungen ( 26.4 ) *2 ( 26,4 ) *2 ( 360.0 ) ( 360,0 ) 1 ( 300.0 ) ( 300,0 ) ( 174.0 ) ( 174,0 ) ( 215,0 ) Aktiver Bereich Dünnstes Teil Ausschließendes vorstehendes Teil ZUR BEACHTUNG • Die Abmessungen beinhalten keine hervorstehenden Teile wie z.B. Schrauben und bestimmte Teile. 82 ( 124.0 ) ( 124,0 ) ( 200.0 ) ( 200,0 ) ( 300.0 ) ( 300,0 ) ( 33.4 ) *3 ( 33,4 ) *3 ( 264.0 ) ( 264,0 ) ( 460.0 ) ( 460,0 ) ( 215.0 ) I J K ( 885.6 ) *1 ( 885,6 ) *1 ( 293.0 ) ( 293,0 ) ( 400.