Installation Guide for LAN connections Experience Reality AQUOS LCD-TVs – Spring/Summer 2011 Page - 1 - ENGLISH DLNA-
LE820 - LE822 - LE814 - LE824 - LE914 - LE925 Contents: 1. Preparation of the PC (Enabling multimedia folder) 2. Settings of the LCD-TV device 3. Description of terms In case during the installation of the DLNA function at your SHARP LCD tv from the 81x - , 82x - oder 92x - series you encounter any problems, use the following instructions for installation.
DLNA – Settings for PC's with Windows XP and Mediaplayer version 11 or higher 1. Launch Mediaplayer (version 11 or higher) and switch on the LCD-TV! Choose “Extras“ and later “Options“. 2. The following notice will appear. Choose the tab "Media Library".
Click “Set up enabling". 3. Now choose "Settings" (the number of displayed devices may vary).
4. If necessary change the name in the field "Enable media as:" The name will later appear on the TV. Now tick the points "Mdia types" and "Automatically allow new devices and computers". 5. In the end it is necessary to choose multimedia folders for enabling. Click "File" and later "Add to the library".
. Click "Add" and choose the folders which contain photos or music in order to add them. After confirming with "OK" the folders will be automatically added by Windows. In case at an earlier point in time this choice was already made the number of just added files will be displayed as "0".
The preparation of the PC is now complete. The PC must be restarted, so that all settings can be taken over. Afterwards you can continue the setting up of the LCD-TV. Preparation of the LCD-TV device: 1. Switch on the TV and use the selector button to choose the point home network: 2. Afterwards press the menu-button Setup and after that the OK-button.
3. The following menu will appear. Next choose “Initialise“ and “Change“. 4. In case your router is set on DHCP, in the point 'Obtain IP address automatically' choose “Yes“ and later "Continue". Note that automatic acquisition of the address is not possible when your router is configured so that access is granted only to particular MACaddresses.
5. In the point Obtain DNS-IP-Address automatically choose “Yes“ and later choose “Continue“. 6. Confirm 'Conduct Advanced Set-up?' with “Yes“. 7. In Ethernet-Connection Speed choose “Automatic Identification“ confirm it and choose “Continue“.
8. On the next image you will see the point „Test“. As soon as you choose “Test“ the LCD-TV device will automatically obtain the IP address after checking you can finalize this point with “Completed“. 9. The current configuration will appear as confirmation. Exit this view by using the Menu-Button (End). 10. Now you should be able to choose both photos and music files from the media library of the PC connected over the router.
. In photo mode (confirm with “OK-button“) choose Images, and then e.g. “All Images“ and later the corresponding photograph. 12. If the server in photo or music mode is not recognized rightaway, choose using the button the network menu and with the button new search. DLNA set-up is now finished.
3. Description of DLNA terms. This compendium was prepared with the aid of the Internet website www.wikipedia.de You can find further information concerning this subject on the same webpage. DLNA - Digital Living Network Alliance (DLNA) is an international association of producers of computers, entertainment electronics and mobiles whose goal is to achieve compatibility of devices from various producers from the branch of consumer and home appliances.
of recipients (multicast, broadcast). The other way round, numerous IP addresses can be allocated to one computer. DNS - Domain Name System is one of the most important services in the network. Its main task is answering inquiries about name resolution. Router is a network device, which connects or disconnects - depending on the point of view - numerous computer networks. In the process the router analyses incoming data packages according to their target addresses and blocks them or transmits them.
