Manual

On-Screen Display Menu
D e _ = $ =
This setting allows you to optimize the settings of
Digital broadcasting.
Example
[_i_ Digital setup ]
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the TV.
To check for the availability of a software update, visit
www.sharpusa.com. If you have any questions, please
call 1-800-BE-SHARP (800-237-4277).
°°°/
®@®
®@®
Q@@
FREEZE MENU
o @
¢ g
FAVORITECH
®®©®
1 Press MENU to display the MENU screen, and then
press _/1_ to select "Digital Setup".
2 Press A/T to select a specific adjustment item,
and then press ENTER.
3 Press A/T (or _/_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: Theoptical output terminal outputs audio signal
inPCMform. If your digitalaudio system does not
support Dolby Digital,select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal inDolby Digitalform. it reproducessound from
surround program of digital.
The current version of the TV software is displayed.
® Do not remove the USB memory device or unplug the
AO cord while the software is being updated,
® Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the iV cannot read the data in the USB
memory device and software updating will fail,
1 Insert the USB memory device with the update file
into the SERVICE terminal on the TV.
2
3
Press MENU to display the MENU screen, and
then press _/_ to select "Digital Setup".
Press A/Y to select "Software Update", and then
press ENTER.
,, If you havealreadyset the Secret No., go to step 4.
!_} Digital Setup I
Software Update
4 Input the 4-digit secret number by using 0-9.
I _] Digital Setup I
(D- 31