Manual

CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the following procedure.
1 Press MENU to display the MENU screen, and then press 4/1_ to select "Setup".
2 Press A/T to select "EZ Setup", "CH Setup", "Parental CTRL", "Reset", "Color System" or "Software
Update", and the Secret number input screen displays.
3 Press and hold both CNA and VOL+ on the TV simultaneously until the message appears on the screen.
Th°s°cr°'°°mb°r'sill
,, As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 25 to set PC input signals.
PC Resolution VESA Standard
720 x 400
VGA
SVGA
PC
XGA
640 x 480
800 x 600
1024 x 768
Horizontal Frequency
81.5 kHz
81.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz
64.0 kHz
64.0 kHz
75.0 kHz
WXGA 1860 x 768
SXGA 1280 x 1024
SXGA+ 1400 x 1050
UXGA 1600 x 1200
*These 4 formats are not supported by tile analog RGB terminak
DDC is a registered trademark of Video Ebctronics Standards Association.
Power Management is a registered trademark of Sun Mbrosystems, inc.
VGA and XGA are registered trademarks of Irltemational Business Machines Corp.
Vertical Frequency
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Cautions regarding use in high and low temperature environments
,, When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
,, Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: 4°Fto +140°F( 20°Cto +60°C)
Q- 50