Manual

Supplied Accessories
Make sure the following accessories are provided with the product.
LC-46SE94U/ LC-46SE94U/
LC-52SE94U LC-52SE94U
LC-65SE94U
Remote control AC cord ( × 1) Cable clamp ( x 1) Stand hob cover Speaker unit Stand unit
unit (x 1) Page 7 Cable tie ( × 1) (x 2) ( x 1) (x 1)
Page 8 Page 7 Page 45 Pages 5 and 6 Page 6
[] Operation manual (× 1) [] "AAA" size battery (× 2) Page 8
Always use the AC cord supplied with the TV.
AC cord enclosed in this product isfor 110 125V. In using it on the 125 240V AC, please cOnSL£ the following.
SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP
6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.
QUICK REFERENCE
• Before attaching (or detaching) the speaker unit, unplug the AC cord from the AC INPUT terminal.
[] LC=65SE94U
"1 Confirm that there are 4 screws and a screwdriver
supplied with the speaker unit.
2 Insert the projections on the speaker unit into the
corresponding slots on the TV, then fasten the screws.
3
Connect the ends of the cables to the speaker
terminals as shown below.
Connect the leads to the speaker terminals of the
same color.
Insert and tighten the 4 screws with the screwdriver _ To detach tile speaker unit, perform tile steps in reverse
(supplied with the product) in the order of (_, _, order.
(_) and _.
Q-5