Manual

QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUOS television for stability.
• Lilt onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
i /
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use it near
water. The AQUOS television is designed for AC use only and should be used with the supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and _ m_.__ _s _
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use __ K 1_
liquid or aerosol cleaners. .......
The screen is glass and can be scratched or broken when dropped or impacted. \ _ _ /
QUICK iNSTALLATiON TiPS
1 Attach your antenna to the back of the AQUOS
television. (See page 12.)
2 Connect the AC plug for the AQUOS television into
the AC outlet.
LC-46SE94U LC-65SE94U
LC-52SE94U
* Place the TV close to the AC outbt, and keep the power
plug within reach.
* This product must only be connected to a 120 V, 60 Hz,
grounded (3 prong) outbt.
Connecting it to any other kind of outlet will damage the
product and invalidate the warranty. (LC 65SE94U only)
4 How to turn on timeAQUOS television for timefirst
time.
A) Press POWER on the AQUOS television.
B) The POWER indicator on the front of the
AQUOS television lights BLUE.
o o y W'_g'
.Top° vE.T.,sKoFs.ocKoo.OTToucHo.,.SOLAT OPA°TSCABLESiiil ii 1
3 Place timeFerrite core in timespace indicated in the
below figure and bundle the cords properly with POWER indicator
timecable clamp and the cable tie.
Ferrite (:ore
* TV angle cannot be adjusted.
Q-7