SHARR AQU OS 77U 77U LiQUiD CRYSTAL TELEViSiON TEL_:VISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LiQUiDO MODE MANI I-I1"111 [_ DOLBY HIGH'DEFINITION 1245 NYCE TELEVISION B|GITAL I HIGH-DEFINITION IMPORTANT • Please read this operation IMPORTANT • Veuillez lire ce mode d'emploi manual before starting avant de commencer IMPORTANTE • Lea este manual de operaci6n antes de comenzar MULTIMEDIA operating TM INTERFACE the equipment. b.utiliser I'appareil. a operar el equipo.
LC-46E77L! LC-52E77U LiQUiD CRYSTAL TELEViSiON ENGLISH ill== OPERATION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. IMPORTANT WARNING: DO NOT OPEN Serial No.: INFORMATION J TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: Model No.
iMPORTANT iNFORMATiON WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment approved by the manufacturer could void the user's authority to operate this equipment. not expressly CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the important Safety instructions carefully before using this product. iMPORTANT SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS = Outdoor Antenna Grounding - If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
iMPORTANT SAFETY iNSTRUCTiONS Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE iSSUE o The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer's recommendations.
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit "AAA" size battery (x 1) (x 2) AC cord (x 1) Cable clamp (x 1) Stand unit (x 1) Page 7 Page 8 Page 7 Page 7 Page 6 Operation manua (x 1) Always use the AC cord supplied with the TV. To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning.
QUICK REFERENCE 1 Attach your antenna to the back of the television. (See page 8.) 2 Connect outlet. o J the AC plug for the television o into the AC Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. 1 i : I 1T (5 m) 30 ° Place the TV close to the AC outlet, and keep the power plug within reach.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. f 1 .A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available). $ 75-ohm coaxial cable (round) 2.
Contents iMPORTANT iNFORMATiON .................................. 1 Trademarks .............................................................. 2 DEAR SHARP CUSTOMER ..................................... 3 iMPORTANT SAFETY iNSTRUCTiONS .................. 3 Supplied Accessories .............................................. 6 QUICK REFERENCE ................................................ 6 Attaching tile Stand ............................................. 6 QUICK INSTALLATION TIPS ...........................
Part Names POWER ® @ ® l' OPC ® Remote control sensor h OPO sensor* (See page 21 .) / / OPC indicator (See page 21 .) / POWER indicator (See page 14.)_ * OPC: Optical Picture Control _ER __ POWER button JU __ -- button MENU AC INPUT terminal JT INPUT button INPUT 7 terminal (HDMI) Channel buttons INPUT 9 terminal (HDMI) (CHA/V) INPUT 8 terminal (HDMI) Volume buttons (VOL+/-) DIGITAL AUDIO OUTPUT terminal AUDIO OUTPUT terminals ®® R-AUDIO-L VIDEO - terminal .........
Part Names 1 1 17 2 3 --18 !ii; 19 ii • 2 DISPLAY: 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment equipment. 5 0---9: Set the channel. (See page 15.) 6 • (DOT}: (See pages 15 and 32.) 7 INPUT: Select a [M input source. ([_/, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7, INPUT 8, INPUT 9) (See page 15.) 8 VOL +/- 9 POWER SAVING: Select Power Saving settings. (See page 17.) 10 FREEZE: Set the still image.
Connecting to External Equipment You can connect many types of external equipment to your TV like a Blu-ray disc player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 15.) To protect equipment, always turn off the TV before connecting any external equipment. Please read the relevant operation manual (Blu-ray disc player, etc.
Connecting to E×temal Equipment It is possible to output audio through outputs from the terminal. the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio To optical digital input of external audio devices DIGITAL AUDIO Optical fiber cable __ ,, (commercially available) Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
Watching TV 1 POWER Press POWER on the TV, or TV POWER on the remote control unit to turn the power on. o POWERindicator (Green):The TV is on. (After a few seconds, a window appears with sound.) o The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the initial setup will not be invoked. For changing the settings of the initial setup, perform EZ setup on the Setup menu on page 23.
Direct Button Operation FREEZE MENU ®d::_ o00 ®@® Q ®@@ Allows you to set a time when the TV automatically switches to standby. Press SLEEP. Theremainingtime displayswhen the sleeptimerhas beenset. Eachtime you press SLEEP, the remainingtime switches as shown below. o C®9 ® -- INPUT FAVORITECH -- ®®©@ _LASH_AOK Off ,_, 30 _ t @® VOL SAnG You can change channels S_JaD by pressing 120 I o When set, the time automatically starts counting down.
Direct Button Operation AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE. Current AV MODE displays. o Press AV MODE again before the mode displayed on the screen disappears. The mode changes as shown below: Example: When the input source is TV, INPUT 1,2 or 3 terminals STANDARD ._ MOVIE .
Direct Button Operation Press CO. Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING. o Eachtime you press POWER SAVING, the mode changes as shown below. Off ,_ Standard ,_ Advanced t ! o This will present the Closed Caption information display. 2 Press CC while the Closed Caption information is still on the screen. o Press repeatedlyuntil you select the desired closed caption service.
Direct Button Operation You can select the screen size. 1 2 Press VIEW o The o The Press o You MODE. View Mode menu displays. menu lists the View Mode options selectable for the type of video signal currently being received. ViEW MODE or A/V while the View Mode menu is displayed to select a desired item on the menu. can sequentially select a View Mode that has its own aspect ratio.
On=Screen Display Menu For TV/INPUT 1/2/3 Mode For HDMI/PC=IN Picture Menu Mode Picture Menu OPC ..................................................................................... Backlight .............................................................................. Contrast .............................................................................. Brightness .......................................................................... Color .....................................................
On=Screen Display Menu = ..... ,,,HTI Example {[ _] _ iiih ..... ,,, LCFONT embedded Example Option Picture ] IIIIIIIIIIIIIIIIIIIIIIIIIII Output select _ ® ® ® ® @ Item displayed in yellow o This indicates the item currently selected. o Press ENTER to go to the adjustment screen for this item. ® b he atio l I the rem_ t accordance Item in brackets • This indicatesthe current settingfor the item. Item displayed in white • This indicatesthat the item can be selected.
On=Screen Display Menu o When set to "On", the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light. o When set to "On: Display", OPC effect displays on the screen while the OPC adjusts the screen brightness. o When set to "On" or "On: Display", the OPC indicator on the TV lights green.
On=Screen Display Menu m Adjust mid-level brightness. The adjustment range of the gamma can be set to a maximum of 4-2 and a minimum of-2 by pressing 4 or _.. You can adjust the sound quality to your preference with the following settings. Example [_ Audio Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality.
On=Screen Display Menu = Power control setting allows you to save energy. Example Example _ [ _ PowerControl Setup ] FREEZE MENU 0 1 Press MENU to display the MENU screen, and then press 41/1_ to select "Power Control". Press A/Y to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 4t/),,) to select the desired setting, and then press ENTER. 4 Press MENU to exit.
On=Screen Display Menu If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". ON Search: Channel auto search makes the TV look for all channels viewable in the set area. ON Memory: You can select the channels to skip in each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable). On: Skips channels.
On=Screen Display Menu == New For adjusting a picture's horizontal and vertical position. H=Pos." Centers the image by moving it to the left or right. V-Pos." Centers the image by moving it up or down. o For resetting adjustments to the factory preset values, press A/Y to select "Reset", and then press ENTER, o When connecting a PC to the HDMI terminal, the image position will be automatically adjusted. It cannot be manually adjusted.
On=Screen Display Menu II MPAA (Voluntary movie rating system} G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be suitable for children. Example PG=13: Parents strongly cautioned. Some material may be inappropriate for children under 13. R: Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions). NC=I 7: No one 17 and under admitted.
On=Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) o The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. o While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On=Screen Display Menu If the image does not come in clearly from the external equipment connected to INPUT 1 or INPUT 2, you may need to change the input signal type setting on the "Input Select" menu.
On=Screen Display Menu Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL+/on the remote control unit or VOL +/on the TV. Sound via the AUDIO OUTPUT terminal is not adjustable and outputs at a consistent level. Variable: Sound via the AUDIO OUTPUT terminal is adjusted with VOL 4-/VOL4-/on the TV. on the remote control unit or Sound via speaker is muted. This function allows you to adjust the closed caption screen appearance to suit your preference.
On=Screen Display Menu This setting allows you to optimize the settings of Digital broadcasting. Example [_ DigitalSetup ] i O @ i This function allows software updates by inserting a USB memory device with the update file into the SERVICE terminal on the TV. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-4277).
On=Screen Display Menu 5 6 Press ENTER to start checking the data in the USB memory device. Press ENTER to start updating. + The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. During the data checking, "Checking" blinks. ! Example Checking + The current version of the TV software and the version of the update file on the USB memory device are displayed.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. To operate the connected equipment, press FUNCTION to select the LED for your device. (VCR, AUDIO, CBL/SAT (cable converte0 or DVD.) The LED lights up, and the remote control unit button will function as follows. + When you operate VCR or DVD, press iNPUT to select the terminal connected to your device.
Other Viewing Options Manufacturer codes VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Using AQUOS LINK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control. Example* [ HDMI certified cable _.
Using AQUOS LiNK When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press REO on the TV's remote control unit. ioi ;° 1 Press MENU to display the MENU screen, and then press 4/_ to select "Option". 2 Press A/T' to select "AQUOS LINK Setup", and then press ENTER. 3 Press A/T ENTER. 4 Press A/T (or 4t/_ ) to select the desired setting, and then press ENTER. 5 Press MENU to exit.
Using AQUOS LiNK AQUOS LINK allows you to operate the HDMIconnected equipment with one remote control. SOURCE LIGHT _ @ Recorder EPG REC Press _ to start playing back a title. = The last played program is played back. You can use the following buttons during broadcast viewing. SOURCE POWER Turns the power of the HDMI connected devices on and off. VOL _ Starts playback. _ CH Hold down to go in reverse. SAnG Hold down to fast forward. [] Playback stops. | | Sets pauses and still pictures.
Using AQUOS LiNK This section explains how to play back a title in the AQUOS LINK-compatible equipment. 1 Power on the AQUOS LINK-compatible equipment, and select appropriate external input. 2 Press OPTION to display the AQUOS LINK MENU screen. 3 Press A/V to select "Top menu/title list", and then press ENTER. o The title list data from the connected AQUOS LINKcompatible equipment displays. 4 Select the title with A/V/4/_, to start playback. 1 Press OPTION to display the AQUOS LINK MENU screen.
Appendix • Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work, make sure to turn off the TV. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 _ r3 _ Hexkey 2 tt 'i Unfasten the four screws used to secure the stand in place.
Appendix Problem Possible Solution o No power o Check if you pressed TV POWER on the remote control unit. (See page 14.) If the indicator on the TV does not light up, press POWER on the TV. Is the AC cord disconnected? (See page 7.) Has the power been turned on? (See page 14.) o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation.
Appendix m PC control of the TV • Attach an R3-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. [] Command format EightASCII codes ÷ OR Command 4-digits oThis operation systemshould be used by a person who is accustomed to using computers. [] Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Appendix item Model: LC-46E77U Model: LC-52E77U LCD panel 46" Class (45 63/j, Diagonal) Advanced Super View & BLACK TFT LCD Resolution 2,073,600 W-standard TV Function Receiving Channel 52" Class (52 _/32"Diagonal) Advanced Super View & BLACK TFT LCD pixels (1,920 x 1,080) (OO1% American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial 2-69ch Broadcast (8VSB) Digitalcabb *_ (64/256QAM) Audio multiplex Backlight 1
Itisnecessary tosetthePCcorrectly todisplay XGAandWXGA signal. PC Resolution Horizontal Frequency Vertical Frequency 720 x 400 VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 PC VESA Standard 31.5 kHz 70 Hz 31.5 kHz 60 Hz 0 37.9 37.5 35.1 37.9 48.1 46.9 kHz kHz kHz kHz kHz kHz 72 75 56 60 72 75 Hz Hz Hz Hz Hz Hz 0 0 0 0 0 0 60 70 75 60 Hz Hz Hz Hz 0 0 0 0 WXGA 1360 x 768 48.4 kHz 56.5 kHz 60.OkHz 47.7 kHz SXGA SXGA+ 1280x1024 1400x1050 64.0kHz 65.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
Dimensional Drawings Unit: inch (mm) LC-46E77U -,_ 43 53/64 (1 13) 4 40 16/64 (1023.4) _- 1 i v 69 o8 ' _ I OJ I_" b_ h 206/4(527) _ 4 45/64 (119) oJ 3 61/64 (100) ! i i 12 lS/16 I LC-52E77U 49 s/s (1254) k 45 9/16 (1157.
SHARI SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en Mexico TINS-E113WJZZA 09P03-MX-NM
