Manual

Appendix
Wall Mount Kit Specifications
Standard dimensions for wall mount kits are shown below,
® The illustration is based on the LC-55LE643U model as an example.
at \\
" WALL MOUNT KF
[ i]
t " I
li II
o i !1
WALL
cl
+ The mounting means shoukS be strong enough to bear the weight of the display,
+ The wall mounting bracket shoukS have UL or related approval,
SCREW
WALL MOUNT
MOUNTING I//_ / I_ DEPTH OF
HO[:ES ......... / _ MOUNTING HOLES
For the screws, refer to the table shown below.
i:
" LC%5LE643U "
Item LC-65LE643U
Screw Dimensions M6 x 10mm x 12.0mm M6 x 10mm x 12.0mm
,_ Do not install the wall mount kk while your TV is turned on. it may result in personal injury due
to electdc shock.
Quantity 4pcs 4pcs
Do not mount the TV at a tilt.
To use this TV mounted on a wall, remove the cable tie as needed.
Do not use screws that do not comply with the VESA standard screw specifications.
o Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV.
o Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.
o SHARP is not liable for product damage or personal injury when a nonWESA or nomspecified wall mount is used or the consumer fails to follow the product installation instructions.
_- 28