MODE D’EMPLOI MANUAL DE OPERAÇÃO OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO ESPAÑOL PORTUGUÊS OPERATION MANUAL MANUAL DE OPERACIÓN Printed on 100% post-consumer recycled paper. Imprimé sur 100% de papier recyclé. Impreso en 100% de papel reciclado de postconsumo. Papel 100% Reciclado - Cuidado do Meio Ambiente.
ENGLISH LC-57D90U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Menu items that are not selectable are grayed out. IMPORTANT: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
QUICK REFERENCE STOP! To safely remove the AQUOS television from the box It’s best to use two or more people to remove the AQUOS television for stability. 1. Use the cardboard holders on either side of the AQUOS television to remove it from the box. 2. Remove the cardboard; however, keep the wrapping on the AQUOS television to protect it while moving. 3. Lift onto installation location as the diagram illustrates.
QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AAA” size batteries (supplied with the product). 3 Close the battery cover. • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Contents IMPORTANT INFORMATION ……………………… 1 DEAR SHARP CUSTOMER ………………………… 3 IMPORTANT SAFETY INSTRUCTIONS …………… 3 QUICK REFERENCE ………………………………… 6 Contents ……………………………………………… 8 Trademarks …………………………………………… 9 COPYRIGHT AND LICENSE NOTICE …………… 9 Supplied accessories …………………………… 10 Part names ………………………………………… 11 TV (Front) ……………………………………… 11 TV (Rear) ……………………………………… 12 Remote control unit …………………………… 13 Preparation ………………………………………… 14 Using the remote control unit ………………… 14 Cautions regarding remote control
Contents Other viewing options …………………………… Viewing a list of channels …………………… Viewing information of the program ………… Freezing images ……………………………… Presetting remote control function …………… Appendix ………………………………………… Removing the speaker ………………………… Removing the stand …………………………… Setting the TV on the wall …………………… Troubleshooting ………………………………… Troubleshooting-Digital broadcasting ……… PC compatibility chart ………………………… RS-232C port specifications ………………… Specifications ………………………………… Dimensional drawings …………………
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (g1) “AAA” size battery (g2) AC cord (g1) Page 7 Page 7 Page 6 Cable clamp (g4) Stand hole cover (g2) Operation manual (g1) Page 6 Page 67 NOTE • Always use the AC cord supplied with the LCD-TV. • AC cord enclosed in this product are for 110-125V.
Part names TV (Front) Channel buttons (CHs/r) Volume buttons (VOLl/k ) INPUT button POWER button Headphone jack (When connecting headphones, the sound from the speaker is muted.) SLEEP indicator Remote control sensor OPC sensor POWER indicator DL indicator** OPC indicator* *OPC: Optical Picture Control (See page 27.) **DL: DownLoad NOTE • See page 15 for the TV status indicator. 11 LC-57D90U(E)-001-013 11 Black 06.1.
Part names TV (Rear) MONITOR OUT terminals i.LINK terminals INPUT 3 terminals CableCARD™ slot INPUT 2 terminals INPUT 1 terminals ANALOG IN terminal DIGITAL AIR IN terminal DIGITAL AUDIO OUTPUT terminal SYSTEM RESET** RESET* DIGITAL CABLE IN terminal RS-232C terminal INPUT 4 terminal INPUT 5 terminals AC INPUT terminal * Press RESET if the TV cannot return to its original state after performing various operations.
Part names Remote control unit 1 1 2 3 17 4 2 3 18 5 6 7 8 9 19 10 4 11 5 12 13 20 6 7 8 21 22 23 9 10 11 24 25 26 14 15 16 17 27 12 13 28 14 15 16 29 30 31 18 19 20 21 22 23 24 25 26 27 28 29 30 31 TV POWER: Switches the Liquid Crystal Television power on or enters Standby mode. (See page 15.) DISPLAY: Displays the channel information. SOURCE POWER: Turns the power of the external equipment on and off. External equipment operational buttons: Operates the external equipment.
Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit under direct sunlight.
Watching TV Simple operations for watching a TV program Turning on the power Press POWER on the TV or press TV POWER on the remote control. • POWER indicator (Blue): The TV is on. (After a few seconds, a window appears with sound.) POWER NOTE • The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the EZ setup will not be invoked. See page 22 for performing EZ setup from the Setup menu.
Watching TV Initial setup When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 7.) 2. Connect the antenna cable to the TV. (See page 14.) 3. Plug in the AC cord to the AC outlet. (See page 6.) 1 2 Language setting Select from among 3 languages: English, French and Spanish.
Watching TV Changing channels-Air/Cable You can change channels in several ways by pressing AIR or CABLE to select the antenna and then following one of the methods below. Method 1 Using CHr/s on the remote control unit or on the TV. Method 2 1. Press FLASHBACK to switch to the previously tuned channel. 2. Press FLASHBACK again to switch back to the currently tuned channel. NOTE • FLASHBACK will not work if no channel has been changed after the TV is turned on.
Watching TV ■ Using MUTE on the remote control unit Changing volume/sound Mutes the current sound output. ■ Changing the volume You can change the volume on the TV or on the remote control unit. Press MUTE. • “M” will be displayed on the screen for 30 minutes, and the sound is silenced. 20 Mute l ■ Using VOL k/l • To increase the volume, press VOL k. • To decrease the volume, press VOL l. NOTE • Within 30 minutes of pressing MUTE, mute can be canceled by using one of the methods below.
Watching TV Setting MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.
Watching TV Connecting Digital Cable Module Digital Cable Module is called CableCARD™. By attaching the CableCARD security module, you can receive various digital services provided by your Cable Company. To obtain and use a CableCARD security module you need to first submit an application. Please contact your cable company to discuss receiving an application. ■ If the above procedure does not work, please follow the following steps instead. 1 Press MENU and the MENU screen displays.
Basic adjustment settings AV input mode menu items List of AV menu items to help you with operations Picture OPC ........................................................ Page 27 Backlight ................................................ Page 26 Contrast ................................................. Page 26 Brightness ............................................. Page 26 Color ....................................................... Page 26 Tint .........................................................
Basic adjustment settings EZ Setup Channel Setup You can run EZ Setup again, even after setting up the preset channels. Language setting Select from among 3 languages: English, French and Spanish. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select “Setup”. Press a/b to select “EZ Setup”, and then press ENTER. If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.
Basic adjustment settings Channel memory setting Antenna Setup – DIGITAL – Air 1 Press MENU and the MENU screen displays. In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the “Antenna Setup - DIGITAL” screen. 2 Press c/d to select “Setup”. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. 3 Press a/b to select “CH Setup”, and then press ENTER.
Basic adjustment settings Cable Reception • This menu provides useful technical information for when the CableCARD security module is installed by cable service personnel. The following information may vary depending on your cable service provider. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select “Setup”. Press a/b to select “Antenna Setup DIGITAL”, and then press ENTER. • If you already set the Secret No., input the 4digit secret number here. See page 54 for setting a secret number.
Basic adjustment settings Deleting a favorite channel Standby Mode Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Standby Mode”, and then press ENTER. 4 1 Press FAVORITE and the favorite channel screen displays. 2 Press a/b to select “1 Data Clear”, and then press ENTER.
Basic adjustment settings Picture adjustments Adjusts the picture to your preference with the following picture settings. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Picture”. 3 Press a/b to select a specific adjustment item. 4 Press c/d to adjust the item to the desired level. 5 Press MENU to exit. NOTE • For resetting all adjustment items to factory preset values, press a/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.
Basic adjustment settings OPC setting Advanced picture adjustments Automatically adjusts the brightness of the screen. 1 2 3 4 Press MENU and the MENU screen displays. This TV provides various advanced functions for optimizing the picture quality. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Picture”. 3 Press a/b to select “Advanced”, and then press ENTER. 4 Press a/b to select a specific adjustment item, and then press ENTER. Press c/d to select “Picture”.
Basic adjustment settings Sharpness Enhancement Provides sharper images with more depth by adjusting background sharpness. NOTE • The higher the number of the level, the more sharpness and depth you will get in images. However, this may also add more background noise. Automatic Contrast Adjusts black level and white level in images automatically as appropriate to a particular scene.
Basic adjustment settings Sound adjustment Dolby Virtual You can adjust the sound quality to your preference with the following settings. You can enjoy the SURROUND 2ch stereo with Dolby Pro Logic II technology. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Audio”. VIRTUAL DOLBY DIGITAL is a technology certified by Dolby Laboratories that creates a virtualized surround sound experience from two speakers using Dolby Pro Logic or Dolby Pro Logic II.
Basic adjustment settings Power Control Power control setting allows you to save energy. Power control for PC source Power control for AV source Power control setting allows you to save energy. No signal off When set to “Enable”, the power will automatically shut down if there is no signal for 15 minutes. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Power Control”. 3 Press a/b to select “No Signal Off”, and then press ENTER.
Basic adjustment settings 4 Digital Setup This setting allows you to set the image of Digital broadcasting. Press a/b to select “REC Picture Size”, and then press ENTER. Screen Size REC Picture Size Video Setup You can adjust the settings for Digital image. 4 : 3 TV 16 : 9 TV Screen Size Set the format of image of Digital broadcasting. 1 2 Press MENU and the MENU screen displays. Press c/d to select “Digital Setup”. 5 Press c/d to select the desired picture size, and then press ENTER.
Using external equipment You can connect many types of external equipment to your TV like a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console or camcorder. To view external source images, select the input source with INPUT on the remote control unit or on the TV. Displaying an external equipment image The explanation is for the setting when connecting a DVD player to the INPUT 1 terminal. Selecting the INPUT signal 1 Press MENU and the MENU screen displays.
Using external equipment Connecting a DVD player You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting to a DVD player and other audiovisual equipment. When using component cable. Component video cable (commercially available) Audio cable (commercially available) DVD player When using composite cable. AV cable (commercially available) DVD player When using DVI cable. (INPUT 5) ø 3.
Using external equipment Connecting a VCR You can use the INPUT 3 terminal when connecting a VCR and other audiovisual equipment. NOTE • The S-video terminal takes priority over the video terminals. S-video cable (commercially available) AV cable (commercially available) VCR NOTE • When attempting to record copy protected material on a VCR or other recording device, the copy protection will activate and the protected material will not be recorded correctly.
Using external equipment Connecting a Digital TV STB (Air or Cable) You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting a Digital TV STB (Air or Cable) and other audiovisual equipment. NOTE • If your cable-TV company has CableCARD security module available, you can also use the CableCARD security module to receive HDTV programs. (See page 20.) When using component cable.
Using external equipment Connecting HDMI equipment Please use the INPUT 4 terminal when connecting HDMI equipment. HDMI cable (commercially available) HDMI equipment Displaying an image from HDMI equipment 1 To watch an HDMI equipment image, select “INPUT4” from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV. (See page 46.) INPUT SOURCE TV 5 Press a/b to select the desired item and press ENTER. 6 Press a/b/c/d to select the desired setting and press ENTER.
Using external equipment Connecting a PC Use the INPUT 5 terminal to connect a PC. NOTE • Refer to page 69 for a list of PC signals compatible with the TV. ø 3.5 mm stereo minijack cable (commercially available) DVI cable (commercially available) RGB/DVI conversion cable (commercially available) ø 3.5 mm stereo minijack cable (commercially available) PC with analog RGB terminal PC with DVI terminal Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal.
Using external equipment Connecting D-VHS decks/AV-HDD recorder/Blu-ray Disc recorder (i.LINK connection) Connecting two or more i.LINK devices Up to 16 i.LINK devices can be connected using a daisy-chain connection with i.LINK cables. About i.LINK i.LINK is an interface connection using a serial transfer system and is able to transfer multimedia data, such as digital images and digital sound, between devices that have i.LINK terminals. i.
Using external equipment Setting the Recording Mode (i.LINK) • The function for automatically adjusting the recording mode of connected i.LINK devices can be turned on or off. • Since most of the currently available i.LINK devices automatically recognize the transfer rates of the pictures and sound being recorded and control the recording mode accordingly, you should always set this Mode to “Pass through” in normal circumstances. • Depending on the i.
Using external equipment Selecting an i.LINK device Disabling the TV’s operation of an i.LINK device • In order to control an i.LINK device from the TV, you must first choose the i.LINK device to be controlled. • One i.LINK device can be chosen from up to 16 i.LINK connected decks. • All i.LINK devices connected with i.LINK cables should automatically appear in the selection screen. • By disabling the TV’s operation of an i.LINK device, the device can be operated from another i.LINK device. 1 Press i.
Using external equipment Controlling an i.LINK device • An i.LINK compatible device can be controlled from the TV using the i.LINK control panel on the screen. • The steps in “i.LINK Setup” on page 39 need to be completed beforehand. • Please also refer to the operation manual of the i.LINK device to be used with this TV. Basic operation 1 Press i.LINK to display the i.LINK control panel. • The i.LINK button is also used to exit the i.LINK control panel.
Using external equipment NOTE Automatic input switching to i.LINK • IEEE1394 is the IEEE’s international standard. • i.LINK and the i.LINK logo are registered trademarks of Sony Electronic, Inc. • A copy protection technology is used on i.LINK devices that incorporate copyright protection. This technology has received the approval of the Digital Transmission Licensing Administrator (DTLA), an organization that administers copyright protection technologies.
Using external equipment Recording digital programs with AV-HDD recorder/Blu-ray Disc recorder • Before commencing this procedure, the steps in “i.LINK Setup” on page 39 need to be completed beforehand. • Please also refer to the operation manual of the AVHDD recorder/Blu-ray Disc recorder to be used with this TV. 1 2 Playing back using REC LIST (i.LINK) • You can display a list of the programs you have recorded on AV-HDD recorder and Blu-ray Disc. 1 Press i.LINK to display the i.LINK control panel.
Useful adjustment settings Image position (AV input mode only) For adjusting a picture’s horizontal and vertical position. 1 Press MENU and the MENU screen displays. Moving the picture on the screen You can move the picture around on the screen. Press a/b/c/d to move an image on the screen to the desired position. Press ENTER to return to the initial image position. NOTE 2 Press c/d to select “Setup”. 3 Press a/b to select “Position”, and then press ENTER. 4 Press a/b to select “H-Pos.” or “V-Pos.
Useful adjustment settings Auto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. 1 Press MENU and the MENU screen displays. Fine Sync. adjustment (PC input mode only) Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. 2 Press c/d to select “Setup”. 1 Press MENU and the MENU screen displays. 3 Press a/b to select “Auto Sync.
Useful adjustment settings Input Select DVI input signal setting 1 Press INPUT to select INPUT5. INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 Selecting input source INPUT5 Use this menu to select the input source. i.LINK 1 Press INPUT. 2 Press INPUT again to select the input source. • A list of selectable sources appears. • An image from the selected source automatically displays. • You can also select the input source by pressing a/b.
Useful adjustment settings Picture Flip Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. You can set the orientation of the picture. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Picture Flip”, and then press ENTER. 4 Press a/b to select the desired mode, and then press ENTER. 5 Press MENU to exit. 1 Press INPUT to select the desired input mode.
Useful adjustment settings AV MODE View mode for 4:3 Programs AV MODE gives you six viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. 1 2 Press VIEW MODE. • The View mode menu displays. • The menu lists the view mode options selectable for the type of video signal currently being received.
Useful adjustment settings a View Mode Normal Zoom Stretch Dot by Dot View mode (for PC input mode) You can select the screen size. NOTE • Connect the PC before making adjustments. (See page 37.) • Selectable screen size may vary with input signal type. 1 2 Press VIEW MODE. • The View mode menu displays. Press VIEW MODE or a/b to select a desired item on the menu. a Screen size images. Input signal Normal Zoom Stretch Dot by Dot Keeps the original aspect ratio in a full screen display.
Useful adjustment settings Input signal (for PC input mode) 4 Press a/b to select the desired level, and then press ENTER. • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
Useful adjustment settings Output Select 2 Allows you to select what controls the audio output. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. Each time you press SLEEP, the remaining time switches as shown below. • When set, the time automatically starts counting down. • If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting. • Five minutes before the time expires, the remaining time displays every minute.
Useful adjustment settings Closed Captions and Digital Closed Captions • Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs, and on some VHS home video tapes at the discretion of the program provider. • Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Useful adjustment settings Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preferences. 1 2 Press MENU and the MENU screen displays. Press c/d to select “Option”. 3 Press a/b to select “Caption Setup”, and then press ENTER. 4 Press a/b to select a specific adjustment item.
Useful adjustment settings Secret number setting for parental control (AV input mode only) 5 Allows you to use a secret number to protect certain settings from being accidentally changed. Select “New Secret No.”, and then press ENTER. Input the new 4-digit secret number by using 0 – 9. New Secret No. Secret No. Clear IMPORTANT: Three conditions must be met to enable the V-Chip (see pages 54 to 59): 1 Secret No. is registered. 2 V-Chip settings have been made. 3 “Status” is set to “On”.
Useful adjustment settings Clearing the secret number Allows you to clear your secret number. 1 Repeat steps 1 to 3 in Setting a secret number. • The secret number setting menu displays. Changing the secret number Allows you to change your current secret number. 1 Repeat steps 1 to 3 in Setting a secret number. 2 Input the 4-digit secret number by using 0 – 9. 3 Press a/b to select “Secret No.”, and then press ENTER. • The secret number setting menu displays.
Useful adjustment settings Parental control (setting V-CHIP level) V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your Liquid Crystal Television.
Useful adjustment settings TV Parental Guidelines (TV Guidelines) 1 Repeat steps 1 to 5 in Voluntary movie rating system (MPAA). 2 Press a/b to select “TV Guidelines”, and then press ENTER. 3 Press a/b to adjust the item to your desired position. “ ” indicates the item is blocked. Voluntary movie rating system (MPAA) 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. • The setting automatically enters “Block” for any ratings below your selection.
Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Useful adjustment settings Canadian English ratings Canadian French ratings 1 Press MENU and the MENU screen displays. 1 Repeat steps 1 to 5 in Canadian English ratings. 2 Press c/d to select “Setup”. 2 Press a/b to select “Can. French Ratings”, and then press ENTER. 3 Press a/b to select “Parental CTRL”, and then press ENTER. 3 Press a/b to adjust the item to your desired position. “ ” indicates the item is blocked.
Other viewing options Viewing a list of channels You can view a list of all currently available broadcast channels. Viewing information of the program You can view information about a program you are currently watching. Press INFO while watching a broadcast. 1 1 Press CH LIST. • A list of all channels (Air or Cable) currently available will be displayed. Broadcast station Air/Cable CH LIST CH. Number • Information of the current program will be displayed. Broadcast station Program WGBH-SD 2.
Other viewing options Freezing images Presetting remote control function You can display two same-sized pictures – one moving and one still. 1 You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. Press FREEZE. • A moving image displays on the left screen and a still image displays on the right screen.
Other viewing options Manufacturer codes REMOTE CONTROL CODE NUMBER VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Other viewing options Cable control buttons When the FUNCTION is set to CBL/SAT the cable converter connected to the TV can operate using 1 to 4. 1 2 1 SOURCE POWER Turns the cable converter power on and off. 2 0–9 Press a button (or buttons) that corresponds to the channel that you wish to watch. 3 FLASHBACK * Press to switch between the current channel and the channel you were watching immediately before. 4 CH r/s Press CH r or CH s to tune in a higher or lower channel.
Other viewing options VCR control buttons 8 2 4 7 3 5 6 1 The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR. • Press INPUT until the input connected to the VCR is selected. The following 1 to 8 can be used to control the VCR. 1 CH r/s Press to select the channel of the TV tuner on the VCR. 2 SOURCE POWER Turns the power of the VCR on and off. 3 F Sets pauses and still pictures. 4 G Rewinds the tape and allows picture search.
Other viewing options Notice ■ When you change your address • If you change your address, please return the CableCARD security module to your Cable Provider Company. • You will need to request a new CableCARD security module from the cable provider at your new location. ■ About EAS (Emergency Alert System) • In the case of a national emergency, natural disaster, or other emergency situation, Cable MSO will broadcast an Emergency Alert Message (EAS message).
Appendix Removing the speaker 1 3 Take off the speaker terminal cover. Unfasten the screws. 2 4 Disconnect the cable from the speaker. Remove the speaker as shown above. CAUTION • Do not remove the stand and speaker from the TV unless using an optional bracket to mount it. NOTE • To attach the speaker, perform the steps in reverse order. 66 LC-57D90U(E)-060-067 66 Black 06.1.
Appendix Removing the stand Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. • Since the TV is very heavy, use two or more people to move it. Before attaching/detaching stand • Before performing work make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed TV POWER on the remote control unit. (See page 15.) If the indicator on the TV is off, press POWER on the TV. • Is the AC cord disconnected? (See page 6.) • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning on the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes.
Appendix Troubleshooting-Digital broadcasting ■ The error message about reception of broadcast The example of an error message displayed on a screen Error code Possible Solution • Failed to receive broadcast. E202 • Check the antenna cable. Check that the antenna is correctly setup. • No broadcast now. E203 • Check the broadcast time in the program guide. ■ The cautions about i.LINK Caution sentence Possible Solution • Record/Playback may fail on the selected model.
Appendix RS-232C port specifications PC Control of the TV • When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections.
Appendix Response code format Normal response O K Return code (0DH) Problem response (communication error or incorrect command) E R R Return code (0DH) Command table • Commands not indicated here are not guaranteed to operate. CONTROL ITEM POWER SETTING INPUT SELECTION A TOGGLE TV INPUT1-5 i.
Appendix Specifications Item LCD panel Number of dots TV TV-standard (CCIR) Function Receiving VHF/UHF Channel CATV Digital Terrestrial Broadcast (8VSB) Digital cable (64/256 QAM) Audio multiplex Brightness Backlight Life Viewing angles Audio out Terminals Rear INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 ANALOG ANTENNA DIGITAL ANTENNA MONITOR OUT DIGITAL AUDIO OUTPUT Model: LC-57D90U 57o Advanced Super View & BLACK TFT LCD 6,220,800 dots (1920 m 1080 m 3 dots) American TV Standard ATSC/NTSC System VHF 2-13ch
Dimensional drawings Unit: inch/(mm) 357/16 (900) 613/32(163) 61/32 (153) 253/4 (654) 2753/64 (706.6) 3247/64 (831) 3739/64 (955) 495/16 (1253.8) 1 4 /2 (114) 423/32 (1069) 557/16 (1408) 179/64 (435) 111/32 (280) 221/16 (560) 1721/64 (440) HOW TO SET THE FACTORY PRESETS Check that the power indicator is not on. Unplug the AC cord and switch off the power. Press and hold down RESET while as you re-insert the AC cord into the outlet, and then switch on the TV.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
VALID IN CANADA ONLY LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
Note 76 LC-57D90U(E)-068-076 76 Black 06.1.
MODE D’EMPLOI MANUAL DE OPERAÇÃO OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO ESPAÑOL PORTUGUÊS OPERATION MANUAL MANUAL DE OPERACIÓN Printed on 100% post-consumer recycled paper. Imprimé sur 100% de papier recyclé. Impreso en 100% de papel reciclado de postconsumo. Papel 100% Reciclado - Cuidado do Meio Ambiente.
