Manual

Enjoying 3D image Viewing {for the LE857U, LE757U, LE755U, LE657U and LE655U models)
2D _ 3D _',._ _ o Converts normal 2D images into 3D
images.
o Creates 3D images from 3D images displayed side by side.
3D mode The image is splk into a left and right image, and then the
(using the Side by Side images are stretched and displayed sequentially to create
3D Glasses) a 3D image.
o Creates 3D images from 3D images displayed on the
top and bottom. The image is splk into a top and bottom
Top and Bottom image, and then the images are stretched and displayed
sequentially to create a 3D image.
Side by Side _ o Creates 2D images from 3D images displayed side by side.
2D mode 2D Only the left image is stretched and displayed. The image
(without does not appear in 3D.
using the o Creates 2D images from 3D images displayed on the
3D GJasses) Top and Bottom
top and bottom. Only the top image is stretched and
,2D
displayed. The image does not appear in 3D.
5 Take off the 3D Glasses and turn off the power.
• The TV screen may temporarily become black when
the TV is trying to detect a 3D image signal and when
swRching from 3D to 2D mode.
The image signal may contain a 3D identification
signal. You carl enable the TV to automatically detect
the 3D image type by selecting "System Options"
> "3D Setup" > "3D Auto Change" on the TV. (See
page 34.)
1 When "3D Auto Change" is set to "Mode 1"
or "Mode 2"
• The 3D image type is detected automatically and
the appropriate 3D image isdisplayed.
• If the input signal swkches to 2D, 2D images are
displayed automatically.
• 3D mode is canceled automatically when the setting is
changed, input selection is changed, or the power is
turned off.
1 Press 3D,
• A screen appears prompting you to select
between 3D and 2D image viewing.
2 Press 4/_ to select "3D" or "2D", and then
press ENTER.
• To view in 3D mode: Select "3D", and then go to
step 3.
• To view in 2D mode: Select "2D", and then go to
step 6.
3 Press -,4/_ to select the 3D signal type
("2D ,3D", "Side by Side" or "Top and Bottom")
and then press ENTER,
When "3D Auto Change" is set to "Off"
• The following message is displayed. Press 3D.
• Press _/_ to select the "Yes", and then press
ENTER.
2 Turn on the 3[) Glasses and place them on your
head.
3 You can now view 3D images.
4 Press 3D during the 3[.) mode.
Select "Yes" and press ENTER to switch to 2D
mode.
• Take off the 3D Glasses and turn off the power.
• If you select the same system as that of the input
signal, 3D images are displayed.
4 Turn on the 3D Glasses and place them on your
head.
You can now view 3D images,
6 Press ,,4/1_ to select the 2D signal type ( "Side
by Side" or "Top and Bottom") and then press
ENTER,
o If you select the same system as that of the input
signal, 2D images are displayed.
• Take off the 3D Glasses and turn off the power.
}' Take off the 3D Glasses and turn off the power.
(D" 33