Manual

Appendix
Wall Mount Kit Specifications
Standard dimensions for wall mount kits are shown below.
® The illustration is based on the LC-80LE857U model as an example.
..al
I
I
ii i i i i i
ji
WALL
" WALL MOUNT KIT
¸¸¸¸¸¸2¸ I
I
LC-70LE857U/ LC-60LE857U/
LO-80LE657U/ LC-70LE757U/ LC-70LE657U/ LO-60LE757U/ LC-60LE657U/
LC@0LE657U LC-80LE857U/ LC-80LE650U/ LC-70LE755U/ LC-70LE655U/ LC-60LE755U/ LC-60LE655U/
LC-80LE757U LC-70LE650U/ LC-60LE650U/
LC-8006500U LC-70LE750U/ LC-7006500U LC-60LE750U/ LC-6006500U
LC-7007500U LC-6007500U
VESA screw
hole specs 23 s/s(600) - 15 s/4(400) 15 s/4(400) - 15 s/4 (400)
(A-B)
al 1 s7/64(40) 2 61/64(75)
Width
a2 13 2s/64(340) 14 49/64(375) 10 2Vs_(275)
bl 7 7/s (200) 10 41/64(270) 7 7/s (200) 7 Sl/64(190) ! 7 7/s(200) 9 1/16(230)
Height b2 14 49/64(375) 13 19/s2(345) 11 1/s2(280) 14 11/64(360) 10 4V64(270) I 12 s9/64(320) 9 1/16(230)
b3 6 sTA4(175) 5 _s/s2(145) 5 sgA4(150) 6 s/16(160) 2 sA (60) 4 47/64(120) 2 sA (60)
ol 3 s/a_(80) 2 4%4 (70)
al : Maximum distance from the mounting hole
a2: Maximum distance from the TV's center
bl : Distance between the TV's center and the mounting hole
b2: Maximum distance from the TV's center
b3: Maximum distance from the mounting hole
c1: Minimum gap
SCREW
WALL MOUNT
0N,T
MOUNTING I//" / I_ DEPTH OF
HO[:ES ......... / _ MOUNTING HOLES
,_ Do not install the wall mount kR while your TV is turned on. It may resuR in personal injury due
to electric shock.
For the screws, refer to the table shown below.
90/80 inch models 70/60 inch models
Standard screws M8 (Use 1.25 pRch screws.) M6 (Use 1.0 pitch screws.)
Length(Depth of mounting holes) 1s/s2(12)
Quantity 4 pcs.
Do not mount the TV at a tilt.
To use this TV mounted on a wall, remove the cable tie as needed.
Do not use screws that do not comply with the VESA standard screw specifications.
o Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV.
o Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.
o SHARP is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
(iD" 53