Manual

On-Screen Display Menu
You can adjust the sound quality to your preference
with the following settings.
AQUOS
NET APPS
1 2 3
A B C D
OC3OO
Example
Different sound sources sometimes do not have the
same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
High: Reducingthe loudnessgapsamong different
sound sourcesstrongly.
Middle:
Low: Reducingthe loudnessgaps among different
sound sourcesslightly.
• Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 31.)
The surround function produces Surround effect from
the speakers.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
Treble
Bass
Balance
1 Press MENU to display the MENU screen, and then
press </_ to select "Audio Settings".
2 Press A,/T to select a specific adjustment item.
• Select "Auto Volume", "Surround", "Bass Enhancer" or
"Clear Voice", and then press ENTER to set each item.
3 Press A/T (or </1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
For weaker treble For stronger treble
For weaker bass For stronger bass
Decrease audio Decrease audio
from the right from the left
speaker speaker
• Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 31.)
• For some discs, setup may be required on your DVD/BD
player. In this case, please refer to the operation manual of
your DVD/BD player.
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
• Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 31.)
This function emphasizes speech against background
noise for greater clarity.
• Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 31 .)
• For resetting Audio adjustment items to the factory preset
values, press A/T to select "Reset", press ENTER, press
A/T to select "Yes", and then press ENTER.
• Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 31.)
@- 28
D_ rtlo_ded _:_om www.ManualslJb.com mare als se{rch engine