Manual

Using the Internet
AQUOS
NET APPS
[] if you cannot connect to the Internet
Perform the procedures below to check your TV's
network settings.
1
2
3
4
5
Press EXIT to display the normal TV screen.
Press MENU to display the MENU screen, and then
press 4/_ to select "Initial Setup".
Press A/_' to select "lntemet Setup", and then
press ENTER.
Press A/Y to select "Network Setup", and then
press ENTER.
Press A/T to select "IP Setup", and then press
ENTER.
• Check that numbersare displayedfor eachsetting.
Ifthereare anysettingswithout numbers,specifythe
numbersbyfollowingthe on-screeninstructions.
Forinformationon how to enter text,see page62.
Example
6 Press MENU to exit.
1 Repeat steps 1 to 4 in IP Setup.
2 Press A/_' to select "Country", and then press
ENTER.
3 Press A/_' to select "US", "Canada", "Mexico" or
"Others", and then press ENTER.
Ifyouselect "Others",you needto setthe desiredarea.
4 Press MENU to exit.
This function can be used to display up-to-date
information on the original home page and allow you to
receive support service over the network.
1 Press AQUOS NET once or twice.
You can also displaythe originalhome page by
pressingFAV APP on the remotecontrol unit.See
page34 for detailson the FAVAPP keyAssign
function.
Eachtimeyou pressAQUOS NET, the screenimage
togglesasshownbelow:
TV+Web _ Web _ TV
t !
When you arenot connectedto the Internet,a network
functionexplanationscreenis displayed.
Theservicesdisplayedvarydependingoncircumstances.
2 Press A/T/_/I_ to select a title, and then press
ENTER.
The servicedetailsvarydependingon circumstances.
3 Press EXIT to return to the normal TV screen.
Web page appearances may differ depending on the type
of screen (TV+Web or Web).
When displaying TV+Web with a channel in which the
V-Chip is enabled, the cursor keys on the remote control
unit do not function.
1 Press APPS to display the application window.
2 Press 4/_-to select "AQUOS ADVANTAGE LIVE",
and then press ENTER.
You can also displaythe AQUOSADVANTAGELIVE
screenby pressingFAV APP on the remotecontrol
unit.Seepage34 for detailson the FAVAPPKey
Assignfunction.
3 Press _,/T/4/_ to select the desired service.
4 Press EXIT to return to the normal TV screen.
The display may change as a result of a software update.
1 Repeat steps 1 to 4 in IP Setup.
2 Press A/T to select "Zip Code", and then press
ENTER. After "Change" is highlighted, press
ENTER again.
3 Enter your zip code.
Use0-9 on the remotecontrol unit,or usethe software
keyboard.
4 After "Complete" is highlighted, press ENTER.
5 Press MENU to exit.
D_ rtlo_ded _:_om www.ManualslJb.com mare als se{rch engine
(N)- 61