Manual

Appendix
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP), The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualified service personnel, Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service professional about using an optional AN-52AG4 bracket to mount the TV on the
wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
About setting the TV angle
AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting
Angular mounting
AN-52AG4
0/5/10 °
The %" position is at the center of the display.
Referto the operation manual of AN-52AG4 for
details.
Detach the cable tie on the rear of the TV when using the optional mount
bracket.
Due to the terminal configuration on this TV, when you wall-mount this
model, make sure there is enough space between the wall and the TV for
the cables.
To use this TV mounted on a wall, remove the AC cord holder and the
covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of
the TV.
I Wall mount
The listed optional accessory is available for the Liquid I bracket
Crystal Television. Please purchase them at your nearest
shop.
Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
(D- 70
D_ nlo_ded _:_om www.ManualslJb.com rnam als se{ rch engine