Manual

QUICK REFERENCE
1 Attach your antenna to the back of the television.
(See page 10.)
2 Connect the AC plug for the television into the AC
outlet.
Use the remote control unit by pointing it towards the
remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may
prevent proper operation.
d)
iAcout,eti
• Place the TV close to the AC outlet, and keep the power
plug within reach.
,, TO PREVENT RiSK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WiTH THE AC CORD CONNECTED.
3 Bundle the cords properly with the cable tie.
4 When turning on the TV for the first time, press
POWER on the touch sensor panel on the front of
the TV.
5
1
_ B
= + V A _] _ L_ I
------- ---=--- ---- ---- --r.._J--I__J
POWER
Insert the batteries into the remote control unit. (See
page 10.)
_iiiili!iiI-
/ \
Remote control sensor 30°
30 ° i i_30 °
t
!
30 ° *
I
17" (5 m)
* The angle is 20° when the stand is attached to the LC-
40LE832U/LC-46LE832 U/LC-52LE832U model.
[] Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. Inaddition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
::\ )q
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
Speakers cannot be detached from the TV.
The TV can be rotated up to 20 degrees to right and left.
[)_ rtlo_ded f_om www.ManualslJb.com mare als search engine
(i_)- 9