Manual

Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit "AAA" size battery Cable tie Stand unit Stand unit Stand unit
(x 1) (x 2) (x 1) (x 1) (x 1) (x 1)
Page 9 Page 10 Page 9 Page 7 Page 8 Page 8
%
LC-46LE832U
LC-40LE832U LC-52LE832U LC-60LE832U
==Operation manual ( x 1) [] Oonnection guide ( x 1)
J
• Always use the AC cord supplied with the TV.
The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE
• Before attaching (or detaching) the stand, unplug the AC cord.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• Be sure to follow the instructions, incorrect installation of the stand may result in the TV failing over.
[] LC=40LE832U
1 Confirm that there are 7 screws (3 long screws, 3 4
middle screws and 1 short screw) supplied with the
stand unit.
2
Attach the supporting post for the stand unit onto
the base as shown below.
The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the
supporting post in the direction indicated below and
attach the stand to the TV with the wider side of the
base facing forward.
®
_t _====== Long screws
Forward
3
Insert the stand into the openings on the rear of the
TV.
Soft c_shion
Insert and tighten the 3 screws into the 3 holes on
the rear of the stand unit.
Middle screws
,5 @ Insert the stand cover.
(_ Insert the screw to secure the stand cover.
To detach the stand, perform the steps in reverse
order.
D_ rtlo_ded _:_om www.ManualslJb.com mare als se{rch engine
(iD-7