MODEL LC-70LE740E LC-70LE740RU LC-70LE741E LC-70LE741S OPERATION MANUAL LCD COLOUR TELEVISION LC-60LE740E LC-60LE740RU LC-60LE741E LC-60LE741S
CE Statement: Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.sharp.de/doc/ WN8522D_7.pdf. NOTE The wireless LAN USB adapter is designed for indoor use only.
[ ENGLISH ] Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Contents Introduction............................................................. 1 Dear SHARP customer ....................................... 1 Contents .............................................................
Introduction Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV. • Headphones—Do not set the volume at a high level.
Introduction Caring for the front panel • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Introduction Supplied accessories Remote control unit ( x 1) Optional accessories LR03 (“AAA” size alkaline) battery ( x 2) The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. No.
Preparation Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) batteries. Angle of the remote control unit Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation.
Part names and functions TV (front/side view) TV (rear view) — continued Illumination LED*1 a (Power) SD CARD (VIDEO STORE) slot MENU (Menu) OUTPUT (Headphones/ AUDIO (L/R)) terminal*4 USB 1 port b (Input source) :r/s (Programme [Channel]) i+/- (Volume) OPC sensor (Page 31) Remote control sensor (Page 6) I J HDMI 1 (HDMI/ARC) terminal HDMI 2 (HDMI) terminal 3D infrared emitter*2 RS-232C terminal 3D mode: Blue illumination 2D mode: White illumination This panel emits infrared signal towards the 3D
Part names and functions Remote control unit 1 2 13 14 3 4 5 15 6 16 7 8 9 17 18 10 19 11 12 20 21 22 1 >a (Standby/On) (Page 18) 2 ATV Access conventional analogue TV mode. DTV Access digital TV mode. SAT Access satellite mode. RADIO DTV/SAT: Switch between radio and data mode. • When only data broadcasting (no radio broadcasting) is transmitted by DVB, the radio broadcasting will be skipped.
Quick guide Operation overview Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection. 1. Preparation — Connecting the TV 2. Preparation — Setting the TV p n w Language setting o w Home/Store setting q • Place the TV close to the AC outlet, and keep the power plug within reach. • Product shape varies in some countries. Press a on the TV (Page 18). Run the initial auto installation (Page 14).
Quick guide 3. Daily operation 4. Advanced features 5. Enjoy additional features 1 Turn on/off the TV 1 Use Time shift + function 1 Connect external devices (Page 18) (Pages 45_47) Connection overview (Pages 23_28) • You can turn on/off the power using both the remote control and the TV. • Be sure to turn off the TV and any devices before making any connections.
Quick guide Inserting the CA card into the CI module In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV. 1 Carefully insert the CI module in the CI slot with the contact side forward. 2 The logo on the CI module must be facing outward from the rear of the TV. Checking CI module information Go to “HOME” > “TV Menu” > “Setup” > “Option” > “CI menu”.
Quick guide Using the HOME screen You can easily launch this “HOME” screen to enjoy Internet connection and Home network functions and to perform settings for the TV. LCFONT This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. Tips: HOME menu contents Basic operation USB media TV Menu Select 1 Display the HOME screen Press D (HOME) and the “HOME” screen will be displayed.
Quick guide Using the Menu screen Using Software keyboard You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. Use the software keyboard when you need to input text. 6 8 7 Display the Menu screen Go to “HOME” > “TV Menu”. • You can also display the Menu screen with pressing the MENU button on the side of the TV. Press c/d to select the desired menu, and then press ;.
Initial auto installation 4 Setting the country. Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? Satellite services are only available for the 740 model series.
Initial auto installation 3 Press a/b to select “Search start”, and then Digital broadcast setting Press c/d to select “Terrestrial” or “Cable”, and then press ;. 4 5 Terrestrial E Cable Searching for terrestrial broadcasts The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna. • To abort the initial auto installation in progress, press 6. press ;. Press c/d to select “Yes” to start searching cable broadcasts, and then press ;.
Initial auto installation Searching for satellite broadcasts (740 series only) Press a/b to select “Satellite search”, and then press ;. E “Single satellite” setting 1 Press a/b to select “Single satellite”, and then press ;. 2 Press a/b/c/d to select your favorite satellite, and then press ;. Max. 4 satellites on DiSEqC multiswitch Communal satellite system NOTE • You can select the antenna connection method from the four types.
Initial auto installation Checking signal strength and channel strength (DVB-T/T2*1/C/S*2/ S2*2) If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. I J 741 series only 740 series only E 4 Press a/b to select “Channel strength”, and then press ;. • You can input a specified frequency band using the 0_9 numeric buttons.
Watching TV Daily operation Turning on/standby the power Turning on the power Press a on the TV or >a on the remote control unit. Switching between digital, satellite* and analogue broadcasts Watching digital broadcasts Watching analogue broadcasts Selecting an external video source Once the connection is made, press b to display the “INPUT” screen, and then press b or a/b to switch over to the appropriate external source with ;.
Watching TV Selecting a sound mode E DTV/SAT mode If multi sound modes are received, each time you press 7 the mode switches as follows. Audio (ENG) L/R STEREO L R Audio (ENG) CH A CH B Audio (ENG) LR CH A CH AB A2 TV broadcasts selection Signal Selectable items Stereo STEREO, MONO Bilingual CH A, CH B, CH AB Monaural MONO NOTE • When no signal is input, the sound mode will display “MONO”. Channel display You can display the channel information by pressing p on the remote control unit.
Watching TV EPG Option EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air. Useful settings for using EPG View setting EPG If you want to use the EPG for digital stations, select “Yes”. The EPG data must be automatically captured while the TV is in standby mode.
Watching TV Selecting a programme using EPG 4 Search a programme in a category 5 Search for a programme by date/time 1 Press G. 2 Press a/b to select the desired 1 Press Y. 2 Press c/d to select the desired The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG. AM Programme info. PM Search by genre Search by date Timer list 3 genre, and then press ;. Press a/b to select a programme you want to watch, and then press ;.
Watching TV Timer setup using EPG Teletext The TV can be switched to a programme or start recording for time shift at the set time. 1 Press EPG. 2 Press a/b/c/d to select the programme you want to set, and then press ;. Back to EPG Watch Next Time shift No Colour (R/G/Y/B) What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
Connecting external devices Introduction to connections ø 3.5 mm stereo minijack cable The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and connect the device. E Before connecting ... HDMI device (Page 24) DVI/HDMI cable HDMI-certified cable • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals.
Connecting external devices DVI/HDMI conversion Video connections Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI connection • When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly. • Both HDMI and DVI use the same HDCP copy protection method.
Connecting external devices SCART connection Y Example of connectable devices PB (CB) PR (CR) Component connection Example of connectable devices E VCR E DVD player/recorder E VCR E DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device.
Connecting external devices Audio connections VIDEO connection Speaker/amplifier connection Example of connectable devices E E E E VCR DVD player/recorder Game console Camcorder Connect an amplifier with external speakers as shown below. E Connecting an amplifier with digital/analogue audio inputs n You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device.
AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled to be on sale after the release of this TV. • AQUOS LINK does not work while using time shift functions.
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recorder that supports the HDMI CEC protocol.
AQUOS LINK AQUOS LINK setup Basic operation Go to “HOME” > “TV Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. NOTE • The factory default for this item is “Off”. Operating an AQUOS LINK device Using genre info.
AQUOS LINK Top menu/title list This section explains how to play back a title in the AQUOS BD player/AQUOS recorder. 1 Press a/b to select “Top menu/title list”, and then press ;. • The linked recorder now powers on and the TV automatically selects the appropriate external input source. • The title list data from the connected AQUOS BD player/AQUOS recorder displays. 2 Press @ to hide the menu screen to operate a/b/c/d buttons. 3 Select the title with a/b/c/d, and then press PLAY I.
Basic adjustment Picture settings Go to “HOME” > “TV Menu” > “Setup” > “Picture”. AUTO Menu CH list :Enter STANDARD Setup :Back MOVIE Picture GAME PC* AV mode USER OPC [Off] Backlight DYNAMIC Contrast DYNAMIC (Fixed) Picture AV mode “AV mode” gives you several viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.
Basic adjustment Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system. C.M.S.-saturation This function increases or decreases the saturation of a selected colour using a six-colour adjustment system. C.M.S.
Basic adjustment Audio settings Go to “HOME” > “TV Menu” > “Setup” > “Audio”. Menu :Enter Audio Audio adjustment Clear voice You can adjust the sound quality to your preference with the following settings.
Basic adjustment Power save settings Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Menu CH list :Enter Setup :Back ECO ECO ECO Energy save No operation off This function enables you to reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span as shown in the following table. Standard Advanced ECO picture control [On] Energy save [Off] Off No signal off Item Reduces the backlight brightness.
Basic adjustment 4 Press a/b to select the broadcast standard View settings you want to search, and then press ;. Go to “HOME” > “TV Menu” > “Setup” > “View setting”. E CH list Setup E :Back Channel settings Quick start Analogue search The TV searches for, sorts and stores all the receivable TV stations. Refer to Analogue broadcast setting on page 15.
Basic adjustment Buttons for “Manual adjust” operation Press R button. Lock When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit. Delete Press Y button. The selected service is deleted. If you want to watch the service you deleted once again, perform “Auto installation”, “Additional search”, or “Manual search”. Sort Press B button.
Basic adjustment Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour system and sound system. E Manual adjust Use this menu to set up analogue TV channels manually.
Basic adjustment TV start-up time setting View setting Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Quick start”. Item The TV quickly starts up from standby. Around 15 W or more of power On consumption is required during standby. The “Quick start” mode will automatically turn on and off depending on the time shift status.
Basic adjustment Individual setting — Language View setting Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the multi audio languages Each time you press 7 on the remote control unit, the audio language switches.
Useful viewing functions NOTE Optional features settings Go to “HOME” > “TV Menu” > “Setup” > “Option”. Menu CH list :Enter Setup :Back Option Option for view 3D setup AQUOS LINK setup Terminal setting Selecting the picture size manually Option Wide mode You can select the picture size. Selectable picture size varies with the type of signal received. 1 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Option for view” > “Wide mode”.
Useful viewing functions Terminal setting Option Option Audio select Input select When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”. When selecting “HDMI 2” from the “INPUT” menu HDMI HDMI + Analogue Item When connecting devices (including a PC) with a HDMI cable to the HDMI 2 terminal.
Useful viewing functions NOTE Option Headphone/Audio out select You can select which device is used for outputting audio. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/ Audio out select”. Headphone Audio out Item Output audio through headphones. Output audio through an A/V receiver or surround audio controller. • This function does not work when “Change audio output device” (Page 30) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”.
Useful viewing functions Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Illumination”. Off Standby Watch Always Item The LED is not illuminated. The LED is illuminated while the TV is in standby mode. The LED is illuminated while you watch TV. The LED is illuminated all the time. NOTE • The factory default for this item is “Watch”. Set to “Off” if you do not want the LED to illuminate.
Other useful features Time shift + You can enjoy DTV/SAT recording or playback by connecting a commercially available USB storage device to the TV. • Time shift + does not work for ATV, external inputs, data broadcasts, radio broadcasts or network applications. Connecting a USB storage device Connect a commercially available USB storage device to the USB port of the TV. • USB storage device: USB memory or USB HDD • Be sure to read the operation manual for the USB storage device.
Other useful features Buttons How to operate Time shift + This function enables you to pause the digital TV or satellite programme you are watching and start watching it again from the paused scene. REC E CAUTION • Do not unplug the AC cord during time shift timer setting or time shift recording. • When the AC cord is unplugged and the TV is turned off: − The time shift timer setting is cancelled. − Recorded data is deleted.
Other useful features Time shift recording You can record the programme you are watching to the registered USB storage device. Starting time shift recording Press REC E. • The TV starts time shift recording. NOTE • You can also operate from the control panel by pressing CONTROL. • You cannot switch the channel or the input source during time shift recording. • Time shift + overwrites existing data when a new recording starts.
Other useful features Display information regarding time shift Channel display Channel information displays by pressing p on the remote control unit. View setting View setting Clear the Time shift memory Device registration You can clear the time shift memory. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Clear the Time shift memory”.
Other useful features USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE • To connect a Home network server, refer to Network setup (Page 57). • This function may not work properly for some USB storage devices. • The corresponding file format is different between “USB media” and “Home network”.
Other useful features When music is being played: Stop music. When music is stopped: All*: Return to the thumbnail selection screen. Folder*: Return to the upper folder. When the top folder is displayed, return to the thumbnail selection screen. Viewing enlarged photos Buttons for enlarged photo display operation (When using USB media mode) Buttons Description c/d (Cursor) Go to the previous/next photo in the same directory. 6 3D R button G button Return to the thumbnail selection screen.
Other useful features Video mode Buttons for file selecting operations (When using USB media mode) Buttons ; Description When selecting a folder icon: Enter this directory. When selecting a video file: Play the video. a/b/c/d (Cursor) Select a desired item. 6 All*: Return to the previous screen. Folder*: Return to the upper folder. When the top folder is displayed, return to the top menu screen. R button G button Y button B button Select/deselect items (✔ mark appears on the selected items).
Other useful features Video file format View setting DivX® setup File extension This is the function to confirm your registration code. You need to register the code at www.divx.com. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “DivX® setup”. E DivX® VOD registration You can find your registration code on this menu. You need to register the TV at www.divx.com before playing the DivX content. E DivX® VOD deregistration You can find your deregistration code on this menu.
Connecting a PC Connecting a PC PC HDMI connection PC Displaying a PC image on the TV Analogue connection PC terminal* Selecting the picture size You can select the picture size. 1 Press f. HDMI 1, 2, 3 or 4 terminal • The “Wide mode” menu displays. 2 Press f or a/b to select the desired item. HDMI-certified cable (commercially available) PC RGB cable (commercially available) PC ø 3.
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually Option Fine sync. Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from the “INPUT” menu, and then press ;. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “PC signal setting” > “Auto sync.”.
Connecting a PC PC compatibility chart Resolution Horizontal frequency Vertical frequency Analogue (D-Sub) Digital (HDMI) VESA standard VGA 640 x 480 31.5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔ ✔ ✔ XGA 1,024 x 768 48.4 kHz 60 Hz ✔ ✔ ✔ WXGA 1,360 x 768 47.7 kHz 60 Hz ✔ ✔ ✔ 64.0 kHz 60 Hz ✔ ✔ ✔ 65.3 kHz 60 Hz ✔ ✔ ✔ 75.0 kHz 60 Hz ✔ ✔ ✔ 67.
Connecting a PC PC control of the TV • When a programme is set, the TV can be controlled from the PC using RS-232C or IP. The input signal (PC/ video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type), ETHERNET cable (commercially available) or wireless LAN USB adapter for the connections.
Connecting a PC Command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 INPUT SELECTION A I CHANNEL T G D _ _ _ _ _ POWER OFF (STANDBY) AV MODE SELECTION _ INPUT SWITCHING (TOGGLE) _ _ _ TOGGLE A C S U 0 _ _ _ SURROUND TOGGLE A V M D 1 _ _ _ STANDARD A C S U 1 _ _ _ SURROUND ON A V M D 2 _ _ _ MOVIE A C S U 2 _ _ _ SURROUND OFF A V M D 3 _ _ _ GAME A C S U 4 _ _ _ SURROUND 3D HALL A V M D 4 _ _ _ USER A C S U 5 _ _ A V M D 5 _
Network setup Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. 4 Press a/b to select “Wired”, and then press Wired installation ;. Use an ETHERNET cable to connect the ETHERNET terminal on the TV to your broadcast router as shown below.
Network setup Wireless installation E NOTE How to connect Use the wireless LAN USB adapter supplied with the TV. E Wireless connection overview 1 Switch on your router before starting the PC Wireless LAN router/access point Wireless LAN USB adapter (supplied) Network NOTE • When using the SHARP wireless LAN USB adapter (supplied), try to provide as much free space around the device for best performance. • Make sure the firewalls in your network allows access to the TV wireless connection.
Net TV What is Net TV? Net TV offers internet service and websites tailored for your TV. Use the TV remote control unit to browse the Net TV internet pages. Net TV allows you to play movies, view pictures, listen to music, play games, rent a movie from a video store* and much more. Net TV provides variety of services for each country. You can browse other countries’ service as well. If a service is unsuitable for children, you can lock it as needed.
Net TV E Reload Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ;. E Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 : Adjust 400 END : Exit 1 Select “Zoom”, and then press ;. 2 Press c/d to adjust the display size. 3 Press > to exit. E Security info. Shows information regarding the security of the page you are browsing. 1 Select “Security info.”, and then press ;.
Enjoying 3D image viewing You can enjoy 3D-supported images on this TV when you wear 3D glasses (AN3DG20), sold separately. To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. NOTE • Refer to the operation manual of the 3D glasses for details regarding usage. • Some menu items are greyed out in 3D mode. This is not a malfunction.
Enjoying 3D image viewing Display format for 3D and 2D images Image for input signals Selectable mode 2D s 3D 3D mode (using the 3D glasses) 2D mode (without using the 3D glasses) Side by Side Description • Converts normal 2D images into 3D images. • Creates 3D images from 3D images displayed side by side. The image is split into a left and right image, and then the images are stretched and displayed sequentially to create a 3D image.
Enjoying 3D image viewing Viewing 3D images 2 Turn on the power of the 3D glasses, and then 2 Press c/d to select “3D” or “2D”, and then NOTE E wear the 3D glasses. press ;. • If you do not want to switch to 3D mode automatically, set “3D auto change” to “No”. • When the TV is receiving a 3D image signal that can be detected automatically, the 3D mode icon is displayed in the channel display.
Enjoying 3D image viewing Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D. 2 Press c/d to select “2D s 3D”, and then press ;. 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. 3D Menu Pressing 3D in 3D mode displays the 3D menu. Press the coloured buttons to make the necessary settings. Configuring the TV settings to enhance 3D image viewing You can make various settings to enhance 3D image viewing.
Enjoying 3D image viewing 3D setup E 3D still image effect setting Basic operation Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set. 3D auto change This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected. Yes No Item When a 3D signal is detected, the TV switches to 3D mode automatically. Automatic change is not performed. NOTE • 3D signals may not be detected depending on the signal format.
Enjoying 3D image viewing Troubleshooting — 3D Images Problem • 3D images are not displayed. • Images displayed in 3D mode appear doubled while you are wearing the 3D glasses. • Images displayed in 3D mode appear 2D while you are wearing the 3D glasses. Possible solution • Is “3D auto change” set to “No”? Press 3D to switch to 3D mode (Page 63). • If “3D auto change” is set to “Yes” but no 3D images are displayed, check the display format of the content being viewed.
Appendix Troubleshooting Problem • No power. • The TV cannot be operated. • Remote control unit does not operate. Possible solution • Is the AC cord disconnected? • Check if you pressed a on the TV. • External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging it in after one or two minutes. • • • • • Picture is cut off.
Appendix Updating your TV via DVB-T/T2*1/ C/S*2/S2*2 Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. I J Downloading the software You can select the method of update. 1 If the software is updated, the confirmation message “New download information has been detected.” appears.* • If the TV receives the update service while in standby mode, a confirmation message displays after turning on the power.
Appendix Information on the software licence for this product Updating your TV via USB/network Information Software update Information Software licence You can read the software licences in this menu. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Warning regarding basic use Cautions regarding use in high and low temperature environments • When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature returns to normal. • Do not leave the TV in a hot or cold location.
Appendix Software licences for Net TV Disclaimers for services using the Internet This product includes the Opera™ browser. DISCLAIMERS • This product contains fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. • Tioga™ is a trademark of Monotype Imaging Inc. and may be registered in certain jurisdictions.
Appendix Specifications Item LCD panel Resolution Video colour system TV TVfunction standard HDMI 1 (EXT 4) HDMI 2 (EXT 5) HDMI 3 (EXT 6) HDMI 4 (EXT 7) USB 1 USB 2 (HDD) USB 3 (WIRELESS LAN) ETHERNET (10/100) HDMI 2/PC AUDIO (L/R) DIGITAL AUDIO OUTPUT C. I.
Appendix Specifications (Wireless LAN USB adapter) Product name Standard Host interface Frequency band Dual Band 802.11n USB2.0 adapter IEEE 802.11a/b/g/n USB2.0 2412_2484 MHz 5150_5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps Transmit Tx 2.4 GHz 11b 17 e/_ 1.5 dBm power and output 11g 14 e/_ 1.
Appendix Environmental specifications Item Mounting the TV on a wall 70 inch models 60 inch models I On-mode (W) (in home-mode) 135 W 100 W J Energy-Save-Mode (W) Advanced 96 W 75 W K Standby-Mode (W) 0.1 W 0.1 W 197 kWh 146 kWh 140 kWh 110 kWh L Annual Energy Consumption (kWh) Annual Energy Advanced L Consumption EnergySave-Mode (kWh) I J K L • This TV should be mounted on a wall only with a SHARP wall mount bracket (Page 4).
Appendix Abbreviation list Rating table for child lock Broadcasted rating User-adjusted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing ✔ — — — — — — — — — — — — — — Parental approval pref. ✔ ✔ ✔ ✔ ✔ — — — — — — — — — — X-rated ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Broadcasted rating User-adjusted rating Universal viewing Parental approval pref. X-rated Universal viewing — — — Parental approval pref.
Appendix Dimensional drawings LC-60LE740E LC-60LE740RU LC-60LE741E LC-60LE741S LC-70LE740E LC-70LE740RU LC-70LE741E LC-70LE741S (26.4) (26,4)*2 (51.0) (51,0)*2 (1613) (89.0) (89,0) (470) (747,63)*1 (747.63)*1 (839) (872) (538) (865.62)*1 (865,62)*1 (149) (1329.12)*1 (1329,12)*1 (136) (975) (1008) (1538.88)*1 (1538,88)*1 (72.
Appendix EU Energy Label for Televisions On 30 November, 2010 the European Commission adopted the Commission Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of televisions. The Regulation entered into force on 20 December 2010 and applies in all Member States. Manufacturers and dealers are required to display the label shown below, on their televisions from 30 November 2011.
