Specifications

Appendix

Removing the stand

For wall mounting with the bracket remove the stand.

Before setting TV on the wall

• Remove the connected cables (DVD, VCR, etc.) from the terminals.

• Before performing work, make sure to turn off the TV.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

NOTE

• To attach the stand, perform the above steps in reverse order.

• As the TV is very heavy, be careful when moving it.

1 Remove the stand cover.

Unfasten the screw used to secure the stand cover.

Remove the stand cover.

2 Unfasten the four screws used to secure the stand in place.

3 Detach the stand from the TV.

LC-70UD1X_EN_book.indb 88LC-70UD1X_EN_book.indb 88 10/18/2013 9:43:26 AM10/18/2013 9:43:26 AM