ENGLISH LC-13S2U LC-15S2U LC-20S2U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: U.S.A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. ■ Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. ■ Stand—Do not place the product on an unstable cart, stand, tripod or table.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Outdoor Antenna Grounding – If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS Page IMPORTANT INFORMATION ....................................................................................................... 1, 2 DEAR SHARP CUSTOMER ............................................................................................................. 3 IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 3-5 CONTENTS .........................................................................................................
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Remote Control “AAA” size (UM/SUM-4) Dry Battery (×2) RRMCGA174WJSA Antenna Cable AC Cord QCNWG0003CEPA QACCDA023WJPA Operation Manual UADP-0212CEZZ UADP-A044WJPZ UBATU0026GEZZ TINS-A965WJZZ Cable Clamp (×2) PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH AC Adapter LHLDWA002WJSB A • AC cord enclosed in this product is an object for 110-125V. In using it on the 125-240V AC, please consult to the following.
PREPARATION Using the Remote Control ■ Use the remote control by pointing it towards the remote control sensor window on the main unit. Objects between the remote control and sensor window may prevent proper operation. POWER OPC HEADPHONE HEADPHONE jack OPC indicator POWER indicator Cautions regarding use of the remote control Remote control sensor ■ Do not expose the remote control to shock. In addition, do not expose the remote control to liquid, and do not place in an area with high humidity.
PREPARATION (Continued) Removing the Terminal Cover LC-20S2U ■ Before connecting cables and cords to the rear terminals, remove the terminal cover. Push in the tab and pull out the terminal cover carefully. ■ To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the terminal cover until the tab locks in place with a click. LC-13/15S2U ■ Before connecting cables and cords to the rear terminals, remove the terminal cover.
PREPARATION (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1.
PREPARATION (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
DISPLAY AND CONTROL OVERVIEW Controls Upper control panel VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER To change the vertical angle of the LCD TV set, tilt the screen up to 2.5 degrees forward or 10 degrees backward. The TV set can also be rotated 25 degrees horizontally. Adjust the angle so that the TV set can be watched most comfortably. Speaker OPC sensor HEADPHONE jack Plug the headphone mini-plug into the HEADPHONE jack located on the front of the TV set.
DISPLAY AND CONTROL OVERVIEW (Continued) ● Adjusting the screen view angle Terminals VIDEO AUDIO (L) AUDIO (R) S-VIDEO AV-IN1 ANT. (Antenna terminal) Y PB PR COMPONENT AUDIO (L) AUDIO (R) POWER INPUT (DC12V) Hold the carrying handle and tilt the screen while steadying the stand with your other hand. Carrying handle Round lock for Kensington Security Standard Slot. AUDIO (R) AUDIO (L) AV-OUT AV-IN2/OUT VIDEO S-VIDEO 13 LC-13/15/20S2U(E)-b 13 03.6.
REMOTE CONTROL 1 POWER (p. 21) 1 POWER 10 BRIGHT 11 SLEEP 2 3 4 5 6 7 PIC. FLIP 12 DISPLAY MUTE ENTER AUDIO ONLY CC MENU TV/VIDEO FLASHBACK VOL CH Switch the Liquid Crystal Television power on or off. 2 SLEEP (p. 26) Set the sleep timer. 3 ENTER Execute a command. 13 14 4 DISPLAY 15 16 5 AUDIO ONLY (p. 29) Display the channel and time information. Output audio without screen image. 6 MUTE (p. 23) 8 Mute the sound. 17 7 VOL (+)/(–) (p. 23) Set the volume. 8 CH ( )/( ) (p.
EZ SETUP (WITH AUTO CLOCK SETTING) EZ SETUP during the First Power On ■ When you turn on the TV for the first time, it will automatically memorize the broadcasting channels and clock. Please perform the following instructions before you press MAIN POWER. (1) Insert the batteries into the remote control. (See page 8.) (2) Connect the antenna cable to the TV set. (See page 10.) (3) Connect the AC adapter to the POWER INPUT terminal of the product and plug in the AC cord to the wall outlet. (See page 11.
EZ SETUP (WITH AUTO CLOCK SETTING) (Continued) EZ SETUP during the First Power On (Continued) 6 POWER Press a/b to select YES, and press ENTER. CONNECT ANTENNA OR CABLE. BRIGHT SLEEP If you want to stop the EZ SETUP process once it has started, press c and it will be canceled. If you want to SET UP again, please refer to pages 35 and 36 on SET UP. PIC.
SETTING THE CLOCK AUTO CLOCK Setting There are two methods of setting the clock: AUTO CLOCK and MANUAL CLOCK. AUTO CLOCK uses EDS signals, which are provided by some TV stations, to automatically adjust the clock. MANUAL CLOCK set the clock manually in areas where no channel carries EDS signals. POWER 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP, and press ENTER. BRIGHT SLEEP PIC.
SETTING THE CLOCK (Continued) AUTO CLOCK Setting (Continued) POWER BRIGHT SLEEP PIC. FLIP DISPLAY MUTE ENTER AUDIO ONLY CC Press a/b to move the cursor to EDS CH SET, and press ENTER. 6 Press c/d to select AUTO or MANUAL. 7 Press a/b to move the cursor to START, and press ENTER.
SETTING THE CLOCK (Continued) MANUAL CLOCK Setting If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK. POWER 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP, and press ENTER. 3 Press a/b to move the cursor to CLOCK, and press ENTER. 4 Press a/b to move the cursor to MANUAL CLOCK, and press ENTER. BRIGHT SLEEP PIC.
BASIC OPERATION TV signals in your region This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay, set the color system according to the country before using this product by following the table below. ■ LC-13S2U, LC-15S2U The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set. Country TV broadcasting system Factory setting of color system User setting TV Video TV U.S.A.
BASIC OPERATION (Continued) Turning on POWER Control section of main unit 1 MAIN POWER 2 Press MAIN POWER, located on the upper side of the main unit, to on. ▼ On-screen display 2 The POWER indicator instantaneously changes from red to green and the main unit turns on. A • The On-screen indicator disappears after a few seconds. STEREO SAP MONO Notes: POWER indicator Standby To turn off the LCD TV POWER Press POWER on the remote control. The POWER indicator turns red. BRIGHT SLEEP PIC.
BASIC OPERATION (Continued) Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes POWER BRIGHT SLEEP PIC. FLIP DISPLAY MUTE ENTER AUDIO ONLY CC MENU CH Turn on the power of the connected video equipment. 2 Press TV/VIDEO and select the applicable input source. The screen displays AV1, AV2, COMPONENT or TV mode each time TV/VIDEO is pressed. AV1 mode AV 1 TV/VIDEO FLASHBACK VOL 1 TV/VIDEO A • The AV input mode indication remains AV2 mode for 3 seconds.
BASIC OPERATION (Continued) Sound Volume POWER 1 Press VOL (+) to increase the sound volume. The bar indicator shifts right. POWER VOLUME 50 BRIGHT SLEEP 2 PIC. FLIP ENTER DISPLAY MUTE AUDIO ONLY CC MENU TV/VIDEO FLASHBACK VOL Press VOL (–) to decrease the sound volume. The bar indicator shifts left. VOLUME 10 MUTE CH To mute the sound VOL (+)/(–) 1 Press MUTE to temporarily turn off the sound. The MUTE mark is displayed for 4 seconds.
BASIC OPERATION (Continued) Changing Channels Changing channels by using Channel Select on the remote control. • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2or 3-digit number. To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds. POWER BRIGHT SLEEP PIC. FLIP DISPLAY MUTE ENTER AUDIO ONLY CC MENU TV/VIDEO FLASHBACK VOL CH CH ( )/( ) FLASHBACK 1 2 Press the Press the 0– 5 button.
SELECTING MENU ITEMS Selecting Menu Items • This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. Press MENU to display the MENU screen. 2 Press a/b to select the desired menu item, and press ENTER. 3 Press MENU to exit. POWER BRIGHT SLEEP PIC.
ADJUSTMENTS Adjusting SLEEP TIMER Settings You can set the SLEEP TIMER to automatically turn off the TV. Directly setting the SLEEP TIMER POWER 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). BRIGHT SLEEP PIC. FLIP DISPLAY MUTE ENTER AUDIO ONLY CC MENU TV/VIDEO SLEEP FLASHBACK VOL CH --- 30 150 120 60 ––– REMA I N 90 (minutes) The SLEEP TIMER is turned off when --- is displayed.
ADJUSTMENTS (Continued) Adjusting BRIGHTNESS Settings You can adjust the brightness of the screen. Directly setting the BRIGHTNESS 1 Press BRIGHT to display the BRIGHTNESS screen. 2 Press BRIGHT to change the setting. POWER BRIGHT SLEEP PIC. FLIP ENTER DISPLAY MUTE AUDIO ONLY CC BRIGHT MENU BRIGHT AUTO TV/VIDEO FLASHBACK VOL NORMAL DARK BR I GHTNESS [ BR I GHT ] CH A • The BRIGHTNESS screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) Adjusting PICTURE FLIP Settings You can set the orientation of the picture. Directly setting the PICTURE FLIP 1 Press PIC. FLIP to display the PICTURE FLIP screen. 2 Press PIC. FLIP to change the setting. POWER BRIGHT SLEEP PIC. FLIP PIC. FLIP DISPLAY MUTE ENTER AUDIO ONLY CC ABC P I CTURE F L I P [NORMAL ] MENU NORMAL TV/VIDEO MIRROR ROTATE UPSIDE DOWN FLASHBACK VOL CH A • The PICTURE FLIP screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) Adjusting AUDIO ONLY Settings When listening to music from a music program, you can set the Liquid Crystal display off and enjoy audio only. Directly setting the AUDIO ONLY 1 Press AUDIO ONLY. “PRESS “AUDIO ONLY” FOR VIDEO OFF” displays. 2 Press AUDIO ONLY again and the screen image will disappear. 3 Press AUDIO ONLY again and the screen image will reappear. POWER BRIGHT SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting PRESET Settings 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to PRESET, and press ENTER. POWER BRIGHT SLEEP PIC. FLIP ENTER DISPLAY MUTE AUDIO ONLY CC MENU TV/VIDEO FLASHBACK VOL MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP ENTER/ a/b/c/d SELECT : CH MENU 3 Press a/b to move the cursor to the desired item, and press ENTER. 4 Press c/d to change the setting, and press ENTER.
ADJUSTMENTS (Continued) Adjusting LANGUAGE Settings The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Press MENU to display the MENU screen. POWER BRIGHT SLEEP MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP PIC. FLIP ENTER DISPLAY MUTE AUDIO ONLY CC MENU TV/VIDEO ENTER/ a/b FLASHBACK VOL SELECT : 2 CH Press a/b to move the cursor to SET UP, and press ENTER. MENU Press a/b to move the cursor to LANGUAGE, and press ENTER.
ADJUSTMENTS (Continued) Adjusting VIDEO ADJUST Settings Video adjustments have different selection items depending on TV mode or AV mode (signal from an external device). (See page 33.) 1 Press MENU to display the MENU screen. POWER MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP BRIGHT SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting VIDEO ADJUST Settings (Continued) TV mode Selected item Press c Press d PICTURE Decrease contrast Increase contrast TINT Toward purple Toward green COLOR Lower color intensity Higher color intensity BLACK LEVEL Less brightness More brightness SHARPNESS Soft picture Sharp picture RED-BLUE Stronger red Stronger blue GREEN Weaker green Stronger green N358 COLOR SYSTEM PAL-M PAL-N AV/COMPONENT mode Selected item Press c Press d PICTURE Decrease c
ADJUSTMENTS (Continued) Adjusting AUDIO ADJUST Settings You can adjust the sound quality to your preference with the following settings. POWER 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to AV ADJUST, and press ENTER. BRIGHT SLEEP MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP PIC.
ADJUSTMENTS (Continued) SET UP ■ EZ SETUP When you move to an area with different broadcasting signals the set will automatically memorize the channel number and time by executing EZ SETUP again. Follow steps 1-3 below, select EZ SETUP, and then go to step 3 on page 15. ■ SETTING THE AIR/CABLE It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. POWER BRIGHT SLEEP 1 Switch the screen to TV mode and press MENU to display the MENU screen.
ADJUSTMENTS (Continued) SET UP (Continued) ■ Saving broadcast TV channels in the memory 1 Press MENU to display the MENU screen, press a/b to move the cursor to SET UP, and press ENTER. 2 Press a/b to move the cursor to CH-SETTING, and press ENTER. 3 Press a/b to move the cursor to CH SEARCH, and press ENTER. 4 Press d. The tuner will search through all available channels in your area and add them to the TV memory. POWER BRIGHT SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting BLUE SCREEN Settings ■ BLUE SCREEN Automatically turns the screen blue if no broadcast signal is received. 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP, and press ENTER. POWER MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP BRIGHT SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting CLOSED CAPTION Settings ■ SETTING CLOSED CAPTION • This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). • Not all programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown.
ADJUSTMENTS (Continued) Adjusting CLOSED CAPTION Settings (Continued) ■ SETTING CLOSED CAPTION Setting the CLOSED CAPTION on the MENU screen POWER 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to CLOSED CAPTION, and press ENTER. BRIGHT SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings ■ V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. • Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [2] TV PARENTAL GUIDELINES ⇐ content based ⇒ FV (Fantasy Violence) V (Violence) S (Sexual Situation) L (Adult Language) D (Sexually Suggestive Dialog) xxx ✕ ✕ ✕ ✕ TV-14 (Parents Strongly Cautioned) X ✕ ✕ ✕ ✕ TV-MA (Mature Audience Only) X ✕ ✕ ✕ RATING TV-Y (All children) ⇑ TV-Y7 (Direct to Older Children) TV-G (General Audience) age based TV-PG (Parental Guidance Suggested) ⇓ ✕ X : The content rating can be set, but t
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) ■ SETTING V-CHIP [1] MPAA RATING 1 Press MENU to display the MENU screen. MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP 2 Press a/b to move the cursor to V-CHIP BLOCK, and press ENTER. MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using Channel Select, and press ENTER. POWER BRIGHT SLEEP PIC.
ADJUSTMENTS (Continued) Parent Control Continued) Adjusting V-CHIP(V-CHIP SettingsOperation (Continued) [2] TV GUIDELINES ● Setting TV GUIDELINES 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 42.) 2 Press a/b to move the cursor to TV GUIDELINES, and press ENTER. POWER BRIGHT SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) ■ Setting BLOCK CONTENT 1 POWER Repeat steps 1 to 3 of [1] MPAA RATING. (See page 42.) V–CH I P BLOCK RETURN MPAA TV GU I DEL I NES BRIGHT SLEEP STATUS [ OFF ] PIC. FLIP DISPLAY MUTE ENTER AUDIO ONLY CC 2 MENU TV/VIDEO ENTER/ a/b/c/d Press a/b to move the cursor to TV GUIDELINES, and press ENTER.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [3] ACTIVATING V-CHIP BLOCK ● Setting STATUS You can activate V-CHIP BLOCK after setting [1] MPAA RATING and/ or [2] TV GUIDELINES. 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 42.) 2 Press a/b to move the cursor to STATUS, and press ENTER. POWER BRIGHT SLEEP V–CH I P BLOCK RETURN MPAA TV GU I DEL I NES PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [5] CHANGING V-CHIP BLOCK SETTINGS 1 POWER BRIGHT SLEEP Repeat steps 1 to 2 of [1] MPAA RATING, then INPUT SECRET NO. will be displayed. I NPUT SECRET NO . PIC. FLIP – – – – DISPLAY MUTE ENTER AUDIO ONLY CC MENU TV/VIDEO FLASHBACK VOL CH 2 Channel Select Input the 4-digit secret number by using Channel Select; the VCHIP select mode will be displayed. Set V-CHIP BLOCK again. EX I T : MENU EX I T : MENU I NPUT SECRET NO .
CONNECTING EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
CONNECTING EXTERNAL DEVICES (Continued) Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT) To AV-IN1 terminal Video Audio (L) Audio (R) To audio/video output terminal Camcorder To S-VIDEO input terminal S-video VCR To S-video output terminal To COMPONENT input (Video) terminal To COMPONENT output (Video) terminal Y PB PR To COMPONENT output (Audio) terminal Audio (L) Audio (R) To COMPONENT input (Audio) terminal DVD Player To AV-IN2 terminal Audio (R) Audio (L) Video To audio/video ou
CONNECTING EXTERNAL DEVICES (Continued) Outputting video and audio (video output) You can output video and audio signals from the TV set through the AV output terminals (AV-OUT). • When using AV2 as an output terminal, select PRESET in the MENU and set AV2 IN/OUT to OUT. (See page 30.) • The factory setting for AV2 IN/OUT is IN. Connect to a VCR, audio amplifier, etc. A • AV2 IN/OUT has 2 OUT modes (see page 30).
TROUBLESHOOTING ■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms. TV set Problem Sound Picture Picture Check item There is no picture or sound. • Make sure the AC adapter is properly inserted in the power outlet. • Reception other than those of broadcasting stations can be considered. • Make sure the input mode is set to TV. • Make sure the MAIN POWER switch of the main unit is on. There is no picture. There is no picture from AV-IN1/2.
TROUBLESHOOTING (Continued) Antenna Problem Check item The picture is not sharp. • • • • The reception may be weak. The quality of the broadcast may also be bad. Make sure the antenna is facing the right direction. Make sure the outside antenna is connected. The picture moves. The picture is doubled or tripled. The picture is spotted. There are stripes on the screen or colors fade. • Make sure the antenna is facing the right direction.
SPECIFICATIONS Items Model LCD panel Number of dots Video color systems TV Standard (CCIR) TV Tuning System TV function STEREO CATV Y/C FILTER Brightness Lamp life (Fluorescent lamp) Viewing angles Audio amplifier Speakers AV-IN1 AV-IN2 Terminals COMPONENT Antenna Headphone OSD language Power supply Weight Accessories LC-13S2U LC-15S2U LC-20S2U 13” Advanced Super View 15” Advanced Super View 19.
DIMENSIONAL DRAWINGS ■ LC-13S2U Unit: inch (mm) 81/16 (205) 91/8 (232) 1223/32 (323) 1117/32 (293) 17/64 (7) 641/64 (168.7) 729/32 (200.8) 143/32 (358) 1033/64 (267) 313/16 (97) 517/64 (134) 221/64 (59) 11/2 (38) 1/32 (1) 1413/32 (366) 315/16 (100) 315/16 (100) 427/32 (123) 8 (203) 53 LC-13/15/20S2U(E)-e 53 03.6.
DIMENSIONAL DRAWINGS (Continued) ■ LC-15S2U Unit: inch (mm) 81/16 (205) 91/8 (232) 1419/64 (363) 17/64 (7) 313/16 (97) 537/64 (142) 221/64 (59) 113/16 (46) 1413/32 (366) 1/32 (1) 315/16 (100) 315/16 (100) 427/32 (123) 8 (203) 54 LC-13/15/20S2U(E)-e 54 03.6.16, 2:34 PM (367) 7/16 14 77/32 (183.
DIMENSIONAL DRAWINGS (Continued) ■ LC-20S2U Unit: inch (mm) 949/64 (248) 119/64 (283) 1821/32 (474) 185/8 (473) 3/16 (5) 9 (228.5) 1127/32 (300.8) 163/16 (411) 157/8 (403.3) 43/64 (103) 127/32 ( (47) 1/32 (1) 185/8 (473) 315/16 (100) 315/16 (100) 73/16 (182.5) 243/64 (68) 55/32 (131) 821/32 (220) 55 LC-13/15/20S2U(E)-e 55 03.6.
CALLING FOR SERVICE For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
VALID IN CANADA ONLY LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.