Operation Manual, Software Setup Guide

When the printer driver selection window

appears, select the printer driver to be installed

and click the [Next] button.

Click the checkbox of the printer driver to be installed so that

a checkmark ( ) appears.

• You can click [Printer name] to change the printer name.

• By selecting the model name from the list and clicking

[Add a printer], you can copy the driver settings and install

multiple drivers for the same model, each with a different

name. (Printer driver only)

• To share the printer, select the [Share this printer]

checkbox .

If the client computer runs a different version of the

operating system than your version, select the [Install

additional driver] checkbox . (Printer driver only)

Follow the instructions on the screen and

proceed with installation.

• Check the content of the displayed screen. Click the [Next]

button to proceed with installation.

• Set the [Run the Autoconfiguration] checkbox to and

install. The options of this machine and the condition of

the peripherals can be reflected in the configuration.

(Printer driver only)

• If the display font is installed, set the [Install Display Font]

checkbox to . (Printer driver only)

Click the [Finish] button.

• To set the installed driver as the default printer, select the

name of the machine from "Set as default printer". If you

don't want to change the default printer, select [Don't

change].

• To print a test page, click [Print test page]. (Printer driver

only)

This completes the installation.

After the installation, a message prompting you to restart your

computer may appear. If this message appears, click the [Yes]

button to restart your computer.

• If a warning window regarding security is displayed, do not

forget to click [Install].