Operation Manual, User's Manual

2-48
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Copy by specifying a repeat count (Fixed Repeat)
7
Specify the repeat partition line.
After the settings are completed, tap and [Back] keys in
sequence.
• To cancel the Auto Repeat setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
8
Tap the [Colour Start] or [B/W Start] key to start copying.
1
Perform steps 1 to 3 in Copy by automatically calculating the repeat count
(Auto Repeat) (page 2-47).
2
Tap the [Fixed Repeat] key.
3
Tap the [Original] and [Paper Select] keys to select an original size and a
paper size, respectively.
► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-32)
► SELECTING THE PAPER TRAY FOR COPYING (page 2-12)
4
Tap [No. of Faces] to set a repeat
count.
After the settings are completed, tap .
The automatic calculation result is shown as the copy ratio.
If the calculated copy ratio exceeds the range from 25% to 400% (using document glass) or 25 to 200% (using automatic
document feeder), an error occurs.
Others
Back
Repeat Layout
Auto Layout of Repeat Face Based on Original, Paper Size and Ratio.
Off
Fixed Repeat
Photo Repeat
Auto Repeat
Paper Select
Copy Ratio
Original
Current Setting
B5
A4
100%
Repeat
Number
Off
Preview
Exposure
Select Type/Exposure
Colour Mode
Parting Line
Layout w/o spacing
Layout
Background Adjustment
Change Size/Direction.
Original
CA
Start
Colour
Start
B/W
4
Preview
No. of copies
Copy Ratio
Enlarge/Reduce Copy
Background Adjustment
Colour Mode
CA
Others
Start
Colour
Start
B/W
Change Size/Direction.
Original
Repeat Layout
No. of Faces
Others
4 Repeat
2 Repeat
8 Repeat
16 Repeat