Operation Manual, User's Manual

5-82
SCANNER/INTERNET FAXOTHER FUNCTIONS
Original scanning
The detectable area that can be scanned in one area is 118 mm (vertical) x 188 mm (horizontal).
An original size of 86 mm x 45 mm can be scanned.
If a card touches a margin line, a scanning error will occur and the card in that area will not be detected.
If multiple cards are placed in one area, a scanning area will occur and the cards in that area will not be detected.
The outline of a thin card or a card with faint colours may not be detected correctly and scanning may fail.
12
34
A is the length from the end of the document glass to the
centre line.
B is the length of the detectable area.
Detectable area Margin line
A:108 mm
B:118 mm
A:178 mm
B:188 mm
10 mm
10 mm
the document glass
1
2
3
4
1
2
3
4
A
B
A
B
C
1
2
3
4
A
B
1
2
3
4
A
B
1
2
3
4
A
B
Pattern 1
Original A: In the regular position and is
detected.
Original B: Is within the margin lines of
area 2, so is detected as an original in
area 2.
Original C: Placed in areas 1, 2, and 4, but is
within the margin lines of area 3 so is
detected as an original in area 3.
Pattern 2
Originals A and B are placed in area 1 in a
detectable state, but neither is detected
because they are treated as multiple
originals in one area.
Pattern 3
Original A: In the regular position and is
detected.
Original B: In area 2, but is not detected
because it touches the margin line.
Pattern 4
Original A: In the regular position and is
detected.
Original B: Not detected because it does not
fit into either area.
Pattern 5
Originals A and B cannot be detected
because both are placed in area 1, or they
are detected as a single original because
they are too close to each other.
Margin lines of 2 Margin lines of 1
Margin lines of 4 Margin lines of 3
Pattern 1
Pattern 2
Pattern 3
Pattern 5
Pattern 4