Operation Manual, User's Manual

7-117
SETTING MODE►SYSTEM SETTINGS
Copy Image Quality
Quick Image Quality Adjustment
You can easily perform copy quality adjustment in the default state.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].
Colour Balance (Colour / B/W)
You can adjust the default colour, gradation, and density of colour copies and black & white copies.
The density of each colour is divided into 3 ranges, and you can adjust the level of each.
Color Copy Black Component Amount Adjustment
Adjust the proportion of the black component in copy quality settings.
Set this for auto, text / printed photo, text, printed photo, photo-paper photo, text / photo-paper photo, map, and faint
original in the original type settings, and for text / printed photo, text, and printed photo when the original is a copy.
Density Adjustment when [Auto] is selected for Exposure
Configure settings for black & white copying when [Auto] is selected for the copy exposure. The exposure can be
adjusted separately for copying using the document glass and copying using the auto document feeder.
Sharpness
You can make copy images in the default state sharper or softer.
Image Quality Priority
Specify image quality priority. Set this for the auto copy exposure and text / printed photo settings.
Print Image Quality
Quick Image Quality Adjustment (Colour / B/W)
Perform quick adjustment of print quality.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].
Colour Balance (Colour / B/W)
You can adjust the tone and density of colour in colour printing and black & white printing.
You can adjust the default colour, gradation, and density of colour copies and black & white copies.
The density of each colour is divided into 3 ranges, and you can adjust the level of each.
Exposure Adjustment
Set the density of colour printing and of black & white printing.
Colour Line Width Adjustment
When colour lines do not print correctly in special applications such as CAD, you can make lines thicker.