Operation Manual, User's Manual

1-95
BEFORE USING THE MACHINE►LOADING PAPER
4
Insert the paper into the tray.
• Load the paper with the print side facing up. Make sure
the stack of paper is straight before loading it.
• Place the paper under the roller on the right side of the
tray.
• After loading the paper, close the guides to the paper
width not to leave the gap from the guides A and B.
• Do not load the paper as shown below.
• The stack must not be higher than the indicator line (maximum of 250 sheets (Maximum of 80 sheets of A6 paper)).
• Do not add paper.
• The paper must not be higher than the protrusion.
5
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
Protrusion
Roller