Operation Manual, User's Manual

7-77
SETTING MODE►SYSTEM SETTINGS
Inbound Routing (Forwarding/Storing) Settings
Inbound Routing Settings
The fax and Internet fax received data can be forwarded according to the stored forwarding table.
When this function is enabled, you can also have the received Internet faxes forwarded to a specified e-mail address
without printing them.
Table Registration
You can store or edit the data forwarding table that has the received data forward settings.
Up to 50 data forwarding tables can be stored.
A single forwarding table can store up to 500 sets of sender number and source address combinations.
Up to 1000 destinations can be stored in all data forwarding tables combined.
Up to 100 destinations of FTP/Desktop/Network Folder data can be stored.
On a model that is not equipped with a hard disk, the setting name is indicated as "Inbound Routing Settings”.
List name Settings
Table Name Enter a forward table name.
Receive Line Select Selects a data receive line.
Sender Address Setting
Select the sender facsimile number or the Internet fax address.
Before you select a sender number or address, store the destination number or address.
To forward all received data, select [Forward All Received Data].
Forward Condition 1/2/3
You can set the forwarding date and destination.
• Forward Condition: Set the data forwarding conditions.
• Day of the Week: Select a day of week to start data forwarding.
• Start Time: Set a time to start data forwarding.
• Completing Time: Set a time to end the data forwarding.
• Format for Forwarding: Select a format of forwarding data.
Forwarding Destination List
Lists the addresses that can be set as the destination. Select a destination by setting it to
.
Add (Selecting from Address
Book)
Open the address book and enter a forwarding destination.
Add (Direct Entry) Enter the destination name directly.
Delete Deletes the selected address.