Setup Manual

8
E
• When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people.
(PN-70SC5/PN-60SC5: at least 3 people.)
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
Screws (M6)
Bracket
The monitor mounting
5/16 - 3/8 inch (8-10 mm)
• Do not use an impact driver.
• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.
n
Attaching the Tray
Secure the tray using 5 tray mounting screws (M3) (supplied).
Specications
Model PN-80SC5
PN-70SC5 PN-60SC5
Power requirement AC 100 V - 240 V, 3.1 A,
50/60 Hz
AC 100 V - 240 V, 2.2 A,
50/60 Hz
AC 100 V - 240 V, 1.6 A,
50/60 Hz
Operating temperature 41°F to 95°F (5°C to 35°C)
Operating humidity 20% to 80% (no condensation)
Power consumption (Maximum) 270 W 200 W 135 W
Dimensions (excluding protrusions)
inch (mm)
Approx. 74-1/8 (W) x
5 (D) x 44-13/16 (H)
(1882 x 127 x 1139)
Approx. 64-3/8 (W) x
3-3/4 (D) x 39-5/16 (H)
(1635 x 96 x 998)
Approx. 56 (W) x
3-3/4 (D) x 34-1/2 (H)
(1422 x 96 x 877)
Weight lbs. (kg)
Approx. 174.2 (79) Approx. 136.7 (62) Approx. 94.8 (43)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Mounting Precautions (For SHARP dealers and service engineers)