Operation Manual, Quick Start Guide

PRINTER
39
PRINTING ON ENVELOPES
The bypass tray or the tray 1 can be used for envelope printing.
(1) Click the [Paper Source] tab.
(2) Select the envelope size from "Output Size".
When "Output Size" is set to [DL], "Paper Type" is also automatically set to [Envelope].
(3) Select [Bypass Tray] or the [Tray 1] from the "Paper Tray".
4
Click the [Print] button.
Printing begins.
Set the paper type of the bypass tray or the tray 1 to [Envelope] and load an envelope into the bypass tray or the tray 1.
► L
oading envelopes (page 22)
(1)
(2)
(3)