Operation Manual, User's Manual

5-103
SCANNER/INTERNET FAX►OTHER FUNCTIONS
ADJUSTING RED/GREEN/BLUE (RGB Adjust)
This function heightens or lightens any one of the three colour components R (red), G (green), and B (blue).
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER
(page 1-116)
► DOCUMENT GLASS (page 1-119)
2
Tap the mode display to switch to the initial screen of each mode.
► CHANGING MODES (page 1-15)
3
Specify the destination.
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-18)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-19)
► ENTERING AN ADDRESS MANUALLY (page 5-20)
► SPECIFYING A NETWORK FOLDER (page 5-21)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-23)
► USING A TRANSMISSION LOG TO RESEND (page 5-25)
4
Tap the [Others] key, and tap the [RGB Adjust] key.
5
Tap of the colour you want to
adjust or slide the slider to adjust the
colouring.
After the settings are completed, tap and [Back] keys in
sequence.
To cancel the RGB Adjust setting:
Tap the [Off] key.
R (Red)+
G (Green)+
B (Blue)+
Preview
Start
Back
Others
CA
Colour Mode
RGB Adjust
This setting is only applied to colour jobs.
Off
On
Specify Send Exposure
Exposure
-2
-1 0 21
-2
-1 0 21
-2
-1 0 21
R
G
B
Touch [+] to darken and [-] to lighten
selected colour tone.