Operation Manual, User's Manual

8-32
SETTING MODE►SETTING MODE LIST
 Operation Settings
 Condition Settings
• Screen Display Settings No Yes
B
- Enlarge Display Mode Disabled No Yes
- Message Time Setting 6 sec. No Yes
- Language Setting Varies depending on
country and region
No Yes
- Default Display Setting Home Screen No Yes
- Display Favorite Menus as Default Disabled No Yes
- Display Action Panel as default. Enabled No Yes
- Icon is displayed when network cable is not
connected.
Enabled
No Yes
- Display Confirmation Dialog when job is
cancelled.
Enabled
No Yes
- Display Status Notification Message Enabled No Yes
- Restrict Total Count display Disabled No Yes
- Switch the Number of Sets to be Displayed for
Job Status
Progress
No Yes
- Display the estimated job start time Disabled No Yes
- Alignment Order of 10-Key Ascending order from
upper left
No Yes
- Setting Display from Main Unit No Yes
+ Display Current Path Enabled No Yes
+ Enable link of current path Enabled No Yes
+ MFP Display Pattern Setting Pattern 1 No Yes
 Key Operation Setting No Yes
• Auto Clear Setting 60sec. No Yes
- Cancel Timer Disabled No Yes
• Key Operation Setting – No Yes
- Time for Accepting Key Entry 0.0 seconds No Yes
- Disable Auto Key Repeat Disabled No Yes
- Time for Accepting Key Entry of Long Touch 0.5 seconds No Yes
- Double Tap Interval Setting 0.5 seconds No Yes
• Disabling of Job Priority Operation Disabled No Yes
• Disabling of Bypass Printing Disabled No Yes
• Priority of Print Jobs – No Yes
Setup Items Factory default setting U A Page