Operation Manual, User's Manual

8-82
SETTING MODE►SYSTEM SETTINGS
Paper Type for Auto Paper Selection
The paper types* that the Auto Paper Selection function will select can be specified. Select one of the following settings:
• Plain 1
• Plain 2
•Recycled
The Auto Paper Selection function will not select any paper types other than the paper types specified with this setting.
* The paper type set for each paper tray by selecting [System Settings] in "Settings" → [Paper Tray Settings].
Plain Paper Compatibility Settings
If you use a printer driver that does not support plain paper 1 or 2, specify the plain paper to be used for printing with the
printer driver.
The weight of Plain Paper 1 is 60 to 89 g/m
2
(16 to 24 lbs bond). The weight of Plain Paper 2 is 90 to 105 g/m
2
(24 to 28
lbs bond). Check the weight of the plain paper that you regularly use, and set accordingly.
Detect Standard in Auto Colour Mode
When the colour mode is set to auto in image send mode, the discrimination point for detecting whether originals are
colour or black and white can be set to one of 5 levels. When set to [Closer to B/W ], the originals are easier to recognize
as black and white. When set to [Closer colour], the originals are easier to recognize as black and white.
Total Setting for Finish
Select the finish setting. Set whether finishing positions are specified on the specified paper or on the original.
Disabling of Duplex
This is used to disable 2-sided printing, such as when the duplex module malfunctions.
Disabling of Offset
Disable offset output.
Disabling of Stapler
This setting is used to prohibit the use of staple, such as when the staple of finisher or saddle finisher malfunctions.
Disabling of Punch
This setting is used to prohibit the use of punch, such as when the punch module of finisher or saddle finisher
malfunctions.
Disabling of Colour Mode
When a color-related problem has occurred and printing is not possible, the use of color mode will be temporarily blocked.
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions. (When the
setting is enabled, scanning is still possible using the document glass.)
Disabling of Inserter
Disables use of the inserter.
Disabling of Folding Unit
This setting is used to disable the folding unit.
Disabling of Trimming Module
This setting is used to disable the trimming module.
Disabling of Large Capacity Cassette
This setting is used to disable the large capacity cassette, such as when it malfunctions.
You can use the saddle folding with the saddle finisher even if the folding unit is disabled.