Operation Manual, User's Manual

8-127
SETTING MODE►SETTING MODE FOR FAX
The following lists the Setting mode for fax and factory default settings.
System Settings
U: General user; A: System administrator/Administrator
SETTING MODE FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Setup Items Factory default setting U A Page
■ System Settings
● Image Send Settings
 Fax Settings
 Condition Settings
• Resolution Setting No Yes
4-54
- Apply the Resolution Set when Stored Disabled No Yes
+ (Resolution) Standard No Yes
- Half Tone Disabled No Yes
• Dial Mode Setting
*1
Tone No Yes
4-3- Auto Select – No Yes
• Auto Wake Up Print Enabled No Yes
• Pause Time Setting 2 seconds No Yes 4-12
• Fax Dest. Confirmation Mode Disabled No Yes
4-29
- Apply to Addresses Other Than Fax – No Yes
- Require Re-entry when Directly Entering the
Fax Destination
Enabled No Yes
• Remote Reception Number Setting 5 No Yes 4-106
• Original Print on Transaction Report Print Out Error Report Only No Yes 8-71
• Transaction Report Print Select Setting No Yes
4-84- Single Sending Print Out Error Report Only No Yes
- Broadcasting Print Out All Report No Yes
- Receiving No Printed Report No Yes
4-84
- Confidential Reception Print Out Notice Page No Yes
• Activity Report Print Select Setting No Yes
4-108- Auto Print at Memory Full Disabled No Yes
- Print Daily at Designated Time Disabled No Yes