PN-70TH5 Dismantle Instruction LCD MONITOR MODEL PN-70TH5 Dismantle Instruction 1
PN-70TH5 Dismantle Instruction Table of contents 1. Scope .................................................................................................................. 3 2. Tools for dismantling ................................................................................................ 3 3. Dismantle Procedure ................................................................................................ 3 4. Back covers ...........................................................................
PN-70TH5 Dismantle Instruction 1. Scope This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU. 2. Tools for dismantling Below tools are required to dismantle this product. - Screw Driver Nipper 3. Dismantle Procedure This product can be dismantled by below steps. 1. Remove Back covers (section 4) 2. Remove the shielding. 3. Remove Printed circuit boards (section 5) 4. Remove Battery (section 6) 5. Dismantle LCD (section 7) 6.
PN-70TH5 Dismantle Instruction 4. Back covers 2 back covers (right/left) can be removed by screw driver.
PN-70TH5 Dismantle Instruction 5. Printed circuit boards All PWBs can be removed by screw driver.
PN-70TH5 Dismantle Instruction 6. Battery This model uses CR2032 Lithium Coin battery on Main I/F PWB and AAA battery for remote control. Battery can easily be removed from the battery holder.
PN-70TH5 Dismantle Instruction 7. LCD Module - LCD Dismantle procedure After you have removed the PWB´s and dismantled the LCD Module please take out the cables from the LCD module. Due to direct bonding technology the front glass cannot be removed from the LCD.
PN-70TH5 Dismantle Instruction 8. Capacitors Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB, LED driver PWB and 5V Power PWB. These capacitors can be removed by using nipper to cut the leads.
PN-70TH5 Dismantle Instruction 9. Parts List Parts described in Annex VII of directive 2012/19/EU are as below.
