Box Connector Guide
Box Connector Guide TABLE OF CONTENTS ABOUT THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 BEFORE USING Box Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 USING Box Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Box Connector Guide Cautions when using the Box Connector function • Print results using the Box Connector function may not have the same quality as print results using other print methods (printer driver, etc.). The contents of some files may cause incorrect printing or prevent printing. • It may not be possible to use some or all Box Connector functions in some countries or regions where the machine is used. • It may not be possible to use the Box Connector function in some network environments.
Box Connector Guide BEFORE USING Box Connector Before using Box Connector, the Box Connector application must be installed on the multifunction machine. For how to install the Box Connector application, please contact your dealer or nearest authorized service representative. Basic requirements and system requirements for Box Connector Item Multifunction machine Description Sharp OSA (MX-AMX2) Required Port Control The following ports are enabled.
Box Connector Guide USING Box Connector Uploading scanned data Printing data from the cloud Box Tap the [Box Connector] key on the Home screen. 1 Toner Quantity Bk C M Y Operation Guide Enlarge Display Mode Settings Total Count Brightness Adjustment Job Status If you cannot find the Box Connector icon on the Home Screen, register the Box Connector to the Home Screen in the Home Screen Settings of the machine System Settings.
Box Connector Guide Print data Select the files that you wish to print. Up to 10 files can be printed simultaneously. Up to 16 print jobs can be reserved. 1 In the screen displayed after login, switch to the print screen and select the folder that contains the file that you wish to print. User The files that are in the folder are displayed. 2 3 Tap the files that you wish to print. User Print settings can be changed from the menu on the right side of the screen. Tap the [Start] key.
Box Connector Guide Print settings To print a single file, you can change the following settings. When multiple files are selected, only the number of copies can be changed. Initial values are used for the other settings. Item * Initial values Description No. of copies 1 1 to 9999 copies can be set. Paper Size Auto Set the print size. 2-Sided Print Off Specify 2-sided printing. N-Up Printing Off Specify N-Up Printing. Staple Sort* Off Specify staple sorting.
Box Connector Guide Scan/upload data. Upload the data scanned on the machine to Box. Select the folder where you want to store the file. Scanned data up to the size set in "Maximum Size of Data Attachments(FTP/Desktop/Network Folder)" of System Settings (Administrator) or up to 9999 sheets (pages) per file can be uploaded. 1 2 Set the original in the machine. For the procedure for setting the original, see the manual of the machine. Scan a document Print Tap the Folder Name.
Box Connector Guide Scan settings Base screen Item Description File Name Sets the file name. Initially, displays the "File Name" set in the detailed settings of Box Connector. Displays the scanned date and time in the File Name entry box when the "Include Date in File Name" is enabled. Folder Name Sets the folder to store a file. Duplex Setup Performs the settings for a 2-sided scanning. Image Orientation Sets the orientation of the image.
2020J-EN2
