Operation Manual, User's Manual

1-118
BEFORE USING THE MACHINE►MAINTENANCE
This section explains how to clean the machine, replace the toner cartridge and the waste toner box.
REGULAR MAINTENANCE
To ensure that the machine continues to provide top quality performance, periodically clean the machine.
CLEANING THE DOCUMENT GLASS AND AUTOMATIC
DOCUMENT FEEDER
If the document glass or document backplate sheet becomes dirty, the dirt will appear as dirty spots, coloured lines, or
white lines in the scanned image.
Keep these parts clean at all times.
Wipe the parts with a cle
an, soft cloth.
If necessary, moisten the cloth with wa
ter or a small amount of neutral detergent. After that, wipe with a clean dry cloth.
Examples of lines in the image
Document glass Document backplate sheet
MAINTENANCE
Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical components or
the fusing unit inside the machine, fire or electrical shock may result.
• Do not use thinner, benzene, or similar volatile cleaning agents to clean the
machine. These may degrade or discolour the housing.
• Use a soft cloth to gently wipe off dirt from the area on the operation panel
with a mirror-like finish (shown at right). If you use a stiff cloth or rub hard,
the surface may be damaged.
• The area with a mirror-like finish is the area that is .
Black lines White lines