Operation Manual, User's Manual

1-19
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Eco
ECO FUNCTIONS OF THE MACHINE
These functions help save power consumption by managing operations of sections prone to high power consumption.
The machine provides two power-saving modes.
In addition to these two modes, using the following functions in conjunction helps reduce even more power
consumption.
Mode Settings
The eco function settings are set in a batch. "Custom Mode" and "Eco Mode" are available.
Setting values applied by each mode is as follows.
Function Description Page
AUTO POWER SHUT-OFF
MODE
If no operations take place, this mode will turn off the power to the operation
panel and the fusing unit, and makes the machine wait in the lowest power
consumption state.
Although the power-saving rate is higher, the wakeup time is longer.
1-20
PREHEAT MODE This mode lowers the temperature of the fusing unit and makes the machine
wait in low power consumption state.
Compared to Auto Power Shut-Off Timer, the power-saving rate is lower, but
the wakeup time is shorter.
1-21
Function Description Page
ECO RECOMMENDATION
FUNCTION DISPLAY
Shows recommended copy/print settings for copy, document filing reprint,
and direct print.
1-21
AS SOON AS THE REMOTE JOB
IS FINISHED, ENTER AUTO
POWER SHUT OFF MODE
The machine returns from Auto Power Shut-Off and enters Auto Power
Shut-Off mode as soon as printing is completed.
1-22
ECO SCAN The machine is operated with the fusing unit turned off for non-printing
operations (that do not use the fusing unit) such as fax and image
transmission.
1-25
Power ON/OFF Schedule Setting Use this function to set the times for turning the power on and off to reduce
power consumption.
1-27
Specific Date Operation Settings When you must have the machine perform exceptionally many print jobs or
other special operation on a certain day, you can specify the day as a
"Specific Date" and define an energy saving pattern only for that day.
1-28
Toner Save Mode This mode is used to reduce toner consumption. 1-29
Sleep Mode Power Level Select whether priority is given to power saving or wakeup time. 1-24
Function Custom Mode Eco Mode
Preheat Mode Setting 1min. 1min.
Turn off Panel Display during
pre-heat mode
On On
Auto Power Shut-Off Timer Fix transition time.: 11min. (for Europe)
1min. (Except for
Europe)
Fix transition time.: 1min.
As soon as the remote job is finished,
enter Auto power shut off mode.
On On