Operation Manual, User's Manual

1-97
BEFORE USING THE MACHINE►LOADING PAPER
Loading envelopes
When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below.
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
Fold the flap and make a sharp crease at the fold.
When placing DL
• Open the flap of the envelope.
• Place so that the flap is on the right.
• When using an envelope, you must rotate the image 180 degrees if needed. For more information, see "ROTATING
THE PRINT IMAGE 180 DEGREES (ROTATE 180 DEGREES) (page 3-34)".
Before printing envelopes, it is recommended that you conduct a test print.
Place the front side facing down.
When printing the front side
Place the front side facing down.
Flap
Address printing