Operation Manual, User's Manual

1-106
BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL
SELECTING A PROCEDURE FOR PLACING
THE ORIGINAL DEPENDING ON THE TYPE
AND STATUS OF THE ORIGINAL
Place the original in the automatic document feeder. Depending the type and status of the original, use the document
glass. Follow the instructions to select the method for placing the original.
AB/Inch Type Setting
The numbers and units of the default settings and input ranges that appear in the setting screens can be switched
between inches and AB sizes.
Default Original Size Settings
Specify this setting when a particular original size is frequently used. The setting will appear in the [Original] key.
Specifying this setting allows the original size setting to be omitted.
Original Feeding Mode
The following original feeding modes can be set to operate by default in copy, image send, and scan to HDD. When a
mode is frequently used, this saves you from having to select the mode in another mode each time you need to use it.
• Slow Scan Mode
• Blank Page Skip
*
* Excluding fax mode and Internet fax mode.
HOW TO PLACE THE ORIGINAL
Initial Original Count Setting
Specifies whether or not "Original Count" in Others is enabled for each function.
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Condition Settings]
→ [Initial Original Count Setting].
The following settings can be configured.
Copy
• Copy
Image Send
•Scan to
• Internet Fax
•Fax
• Data Entry
Document Filing
• Scan to HDD