Operation Manual, User's Manual

2-22
COPIER►BASIC PROCEDURE FOR MAKING COPIES
ENLARGE/REDUCE
AUTO RATIO SELECT
This section explains how to automatically select the appropriate ratio to meet the paper size when manually changing
the paper tray to make a copy on paper that has a size different from the original.
For a non-standard size original, the size must be entered in order to use Auto Image.
To change the default ratio:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Copy Ratio].
1
Manually select the paper tray, and place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
SELECTING THE PAPER TRAY FOR COPYING
(page 2-12)
AUTOMATIC DOCUMENT FEEDER (page 1-107)
DOCUMENT GLASS (page 1-109)
2
Tap the [Copy Ratio] key.
COPY MODE (page 2-3)
3
Tap the [Auto Image] key.
An enlargement/reduction ratio appropriate for the set
original size and selected paper size is automatically
selected.
The automatically selected ratio will appear in the ratio
display.
To cancel the Auto Ratio Selection setting:
Tap [Auto Image] to deselect it.
To return the ratio to 100%:
Tap the [100%] key.
A4 A5
A4
B5
B5 A5
A6
A6
Preview
Copies
Auto Image
Slightly Reduce
(3% Reduction)
Original
Paper
By Paper Size
100
( 25~200 )
%
CA
Copy Ratio
Start
1
A4 A5
A4
B5
B5 A5
A6
A6