Operation Manual, User's Manual

2-45
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Copy by automatically calculating the repeat count (Auto Repeat)
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER (page 1-107)
DOCUMENT GLASS (page 1-109)
2
Tap the [Detail] key to change to normal mode.
CHANGING MODES (page 1-11)
3
Tap the [Others] key, and then tap the [Repeat Layout] key.
4
Tap the [Auto Repeat] key.
5
Check the repeat faces which have
been calculated automatically.
Change the original size, paper size, or copy ratio by tapping
the respective [Original], [Paper Select], or [Copy Ratio] key
when necessary.
SELECTING THE ORIENTATION AND SIZE OF THE
ORIGINAL (page 2-29)
MANUAL RATIO SELECTION (page 2-23)
SELECTING THE PAPER TRAY FOR COPYING (page
2-12)
Set so that there are one or more repeat faces.
6
Tap the [Layout] key.
Tap the [Layout w/o spacing] key and [Layout evenly
spaced] key to select the layout.
CA
Others
Repeat Layout
Change Size/Direction.
Original
Background Adjustment
Exposure
Select Type/Exposure
Preview
Layout
Select Image Layout
Layout w/o spacing
Layout evenly
Start
Back
Fax
Scan
Repeat Layout
Layout
Select Image Layout
Layout w/o spacing
Layout evenly
Back
Fax
Scan
Repeat Layout
Layout
Select Image Layout
Layout w/o spacing
Layout evenly spaced
Others