Operation Manual, User's Manual

2-108
COPIER►CONVENIENT COPY FUNCTIONS
2
INTERRUPT COPY
This function suspends a job in progress, and preferentially prints the original specified with interrupt copy.
When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy.
CONVENIENT COPY FUNCTIONS
The [Interrupt] key does not appear while an original is being scanned.
Depending on the settings of the job in progress, the [Interrupt] key may not appear.
Interrupt copy cannot be used in combination with the following functions:
Job Build, Card Shot, Original Count, Proof Copy, and Preview Setting.
If you use the document glass for interrupt copy, you cannot select the booklet, covers/inserts function, or N-Up setting.
If any of these functions are necessary, use the automatic document feeder.
1
Tap the [Interrupt] key.
The interrupt mode screen appears.
If user authentication is specified:
Tap the [Interrupt] key to display the user authentication screen. Enter the login name and password to perform user
authentication.
2
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER (page 1-107)
DOCUMENT GLASS (page 1-109)
3
Configure copy settings.
To cancel interrupt copy, tap the [Cancel] key.
Plain
A4
A4
A4
2
1
3
4
A4
Auto
A4
Paper Select
Original
Exposure
Auto
2-Sided Copy
1-Sided→1-Sided
Sort/Group
Staple Sort
Auto
Copy Ratio
100%
Others