Operation Manual, User's Manual

4-44
FACSIMILE►BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER
SIZE
When the original size is not standard (inch size or non-standard size) or is not detected correctly, manually specify the
original size.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only.
1
Tap the [Detail] key to change to normal mode.
CHANGING MODES (page 1-11)
2
Tap the [Original] key.
3
Tap the [Scan Size] key.
4
Tap the appropriate original size key.
After the settings are completed, tap .
If you are sending a long original, tap the [Long Size] key.
Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 500 mm
(19-5/8") (the maximum height is 216 mm (8-1/2")).
TRANSMITTABLE ORIGINAL SIZES (page 4-26)
Address Book
Others
Address Fax Number
N-Up
Put Multiple Pages in A Page
reception memory
Speaker
Start
CA
Preview
100%
Address Book
Others
Address Fax Number
N-Up
Put Multiple Pages in A Page
reception memory
Speaker
Start
CA
Preview
100%