Operation Manual, User's Manual

4-45
FACSIMILE►BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE USING
NUMERIC VALUES
When scanning a non-standard size original such as a postcard, specify the original size by numeric values after placing the
original. The width can be from 25 mm to 356 mm (1" to 14"), and the height can be from 25 mm to 216 mm (1" to 8-1/2").
When the scan size is specified by numeric values, the send size cannot be specified.
1
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-11)
2
Tap the [Original] key.
3
Tap the [Scan Size] key.
4
Tap the [Direct Entry] key, and enter
the scan size.
• Tap the areas displaying width and height sizes
respectively, and enter the sizes using the numeric keys.
• It is convenient to use to finely adjust the entered
size.
5
Tap the [OK] key.
After the settings are completed, tap twice.
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.
Original
2-Sided
Tablet
2-Sided
Booklet
A4 A4Auto
Scan Size Send Size
Original Orientation
100%
Others
Address Fax Number
N-Up
Put Multiple Pages in A Page
reception memory
100%
Speaker
Start
CA
Address Book
Preview
Scan Size
(25 ~ 356)
mm
mm
(25 ~ 216)
AB Inch
OK
Direct Entry
210
X
Y
Custom Size
Address Fax Number
N-Up
Put Multiple Pages in A Page
reception memory
Speaker
Start
CA
Address Book
Preview
100%
Others
297
Size:
A4